网络拓扑结构（本次网络为有线、无线，由于无线办公流量较大，采用分流方式较好）

网络拓扑图 .jpg


配置说明需要做负载负担，基于策略路由实现，使用默认路由可能产生出去丢包现象

system-view

acl number 2000

 description for_NAT-use

 rule 0 permit ip source any
quit

acl number 3000

 description for_Cable_Office_use

 rule 0 permit ip source 192.168.10.0 0.0.0.255
quit
acl number 3001

 description for_Wireless_Office-use

 rule 0 permit ip source 10.100.2.0 0.0.0.255
 rule 1 permit ip source 10.100.3.0 0.0.0.255
quit
traffic classifier c1  
 if-match acl 3000
traffic classifier c2  
  if-match acl 3001
quit
traffic behavior b1
  redirect ip-nexthop  223.11.12.1
traffic behavior b2
  redirect ip-nexthop  123.126.109.1
quit
traffic policy p1
   classifier c1 behavior b1
   classifier c2 behavior b2
quit
interface Ethernet0/0/0 #内网接口
  traffic-policy p1 inbound
quit
interface Ethernet0/0/1 #内网接口
  traffic-policy p1 inbound
quit

interface G0/0/0 #外网接口

  nat outbound 2000

quit

interface G0/0/1 #外网接口

  nat outbound 2000

quit

ip route-static 0.0.0.0 0 223.11.12.1 （当策略路由失效，可以采用缺省路由出去）

ip route-static 0.0.0.0 0 123.126.109.1