/* linux/drivers/i2c/busses/i2c-s3c2410.c
*
* Copyright (C) 2004,2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 I2C Controller
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/i2c-id.h>
#include <linux/init.h>
#include <linux/time.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-iic.h>
#include <asm/arch/iic.h>
/* i2c controller state */
enum s3c24xx_i2c_state {
STATE_IDLE,
STATE_START,
STATE_READ,
STATE_WRITE,
STATE_STOP
};
struct s3c24xx_i2c { //i2c结构体
spinlock_t lock;
wait_queue_head_t wait;
struct i2c_msg *msg;
unsigned int msg_num;
unsigned int msg_idx;
unsigned int msg_ptr;
unsigned int tx_setup;
enum s3c24xx_i2c_state state;
void __iomem *regs;
struct clk *clk;
struct device *dev;
struct resource *irq;
struct resource *ioarea;
struct i2c_adapter adap;
};
/* default platform data to use if not supplied in the platform_device
*/
static struct s3c2410_platform_i2c s3c24xx_i2c_default_platform = {
.flags = 0,
.slave_addr = 0x10,
.bus_freq = 100*1000,
.max_freq = 400*1000,
.sda_delay = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON,
};
/* s3c24xx_i2c_is2440()
*
* return true is this is an s3c2440
*/
static inline int s3c24xx_i2c_is2440(struct s3c24xx_i2c *i2c)
{
struct platform_device *pdev = to_platform_device(i2c->dev);
return !strcmp(pdev->name, "s3c2440-i2c");
}
/* s3c24xx_i2c_get_platformdata
*
* get the platform data associated with the given device, or return
* the default if there is none
*/
static inline struct s3c2410_platform_i2c *s3c24xx_i2c_get_platformdata(struct device *dev)
{
if (dev->platform_data != NULL)
return (struct s3c2410_platform_i2c *)dev->platform_data;
return &s3c24xx_i2c_default_platform;
}
/* s3c24xx_i2c_master_complete
*
* complete the message and wake up the caller, using the given return code,
* or zero to mean ok.
*/
static inline void s3c24xx_i2c_master_complete(struct s3c24xx_i2c *i2c, int ret)
{
dev_dbg(i2c->dev, "master_complete %d\n", ret);
i2c->msg_ptr = 0;
i2c->msg = NULL;
i2c->msg_idx ++;
i2c->msg_num = 0;
if (ret)
i2c->msg_idx = ret;
wake_up(&i2c->wait);
}
static inline void s3c24xx_i2c_disable_ack(struct s3c24xx_i2c *i2c)
{
unsigned long tmp;
tmp = readl(i2c->regs + S3C2410_IICCON);
writel(tmp & ~S3C2410_IICCON_ACKEN, i2c->regs + S3C2410_IICCON);
}
static inline void s3c24xx_i2c_enable_ack(struct s3c24xx_i2c *i2c)
{
unsigned long tmp;
tmp = readl(i2c->regs + S3C2410_IICCON);
writel(tmp | S3C2410_IICCON_ACKEN, i2c->regs + S3C2410_IICCON);
}
/* irq enable/disable functions */
static inline void s3c24xx_i2c_disable_irq(struct s3c24xx_i2c *i2c)
{
unsigned long tmp;
tmp = readl(i2c->regs + S3C2410_IICCON);
writel(tmp & ~S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON);
}
static inline void s3c24xx_i2c_enable_irq(struct s3c24xx_i2c *i2c)
{
unsigned long tmp;
tmp = readl(i2c->regs + S3C2410_IICCON);
writel(tmp | S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON);
}
/* s3c24xx_i2c_message_start
*
* put the start of a message onto the bus
*/
static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c,
struct i2c_msg *msg)
{
unsigned int addr = (msg->addr & 0x7f) << 1;
unsigned long stat;
unsigned long iiccon;
//写对应的适配器控制器
stat = 0;
stat |= S3C2410_IICSTAT_TXRXEN;
if (msg->flags & I2C_M_RD) {
stat |= S3C2410_IICSTAT_MASTER_RX;
addr |= 1;
} else
stat |= S3C2410_IICSTAT_MASTER_TX;
if (msg->flags & I2C_M_REV_DIR_ADDR)
addr ^= 1;
// todo - check for wether ack wanted or not
s3c24xx_i2c_enable_ack(i2c);//使能应答
//向i2c从设备传递开始位和从设备地址
iiccon = readl(i2c->regs + S3C2410_IICCON);
writel(stat, i2c->regs + S3C2410_IICSTAT);
dev_dbg(i2c->dev, "START: %08lx to IICSTAT, %02x to DS\n", stat, addr);
writeb(addr, i2c->regs + S3C2410_IICDS);
/* delay here to ensure the data byte has gotten onto the bus
* before the transaction is started */
ndelay(i2c->tx_setup);
dev_dbg(i2c->dev, "iiccon, %08lx\n", iiccon);
writel(iiccon, i2c->regs + S3C2410_IICCON);
stat |= S3C2410_IICSTAT_START;
writel(stat, i2c->regs + S3C2410_IICSTAT);
}
static inline void s3c24xx_i2c_stop(struct s3c24xx_i2c *i2c, int ret)
{
unsigned long iicstat = readl(i2c->regs + S3C2410_IICSTAT);
dev_dbg(i2c->dev, "STOP\n");
/* stop the transfer */
iicstat &= ~ S3C2410_IICSTAT_START;
writel(iicstat, i2c->regs + S3C2410_IICSTAT);
i2c->state = STATE_STOP;
s3c24xx_i2c_master_complete(i2c, ret);
s3c24xx_i2c_disable_irq(i2c);
}
/* helper functions to determine the current state in the set of
* messages we are sending */
/* is_lastmsg()
*
* returns TRUE if the current message is the last in the set
*/
static inline int is_lastmsg(struct s3c24xx_i2c *i2c)
{
return i2c->msg_idx >= (i2c->msg_num - 1);
}
/* is_msglast
*
* returns TRUE if we this is the last byte in the current message
*/
static inline int is_msglast(struct s3c24xx_i2c *i2c)
{
return i2c->msg_ptr == i2c->msg->len-1;
}
/* is_msgend
*
* returns TRUE if we reached the end of the current message
*/
static inline int is_msgend(struct s3c24xx_i2c *i2c)
{
return i2c->msg_ptr >= i2c->msg->len;
}
/* i2s_s3c_irq_nextbyte
*
* process an interrupt and work out what to do
把传输工作进一步推进
*/
static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
{
unsigned long tmp;
unsigned char byte;
int ret = 0;
switch (i2c->state) {
case STATE_IDLE:
dev_err(i2c->dev, "%s: called in STATE_IDLE\n", __FUNCTION__);
goto out;
break;
case STATE_STOP:
dev_err(i2c->dev, "%s: called in STATE_STOP\n", __FUNCTION__);
s3c24xx_i2c_disable_irq(i2c);
goto out_ack;
case STATE_START:
/* last thing we did was send a start condition on the
* bus, or started a new i2c message
我们最近做的一件事是启动一个新的i2c消息
*/
if (iicstat & S3C2410_IICSTAT_LASTBIT &&
!(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
/* ack was not received... 没有收到ACK*/
dev_dbg(i2c->dev, "ack was not received\n");
s3c24xx_i2c_stop(i2c, -EREMOTEIO);
goto out_ack;
}
if (i2c->msg->flags & I2C_M_RD)
i2c->state = STATE_READ;
else
i2c->state = STATE_WRITE;
/* terminate the transfer if there is nothing to do
* (used by the i2c probe to find devices */
if (is_lastmsg(i2c) && i2c->msg->len == 0) {
s3c24xx_i2c_stop(i2c, 0);
goto out_ack;
}
if (i2c->state == STATE_READ)
goto prepare_read;
/* fall through to the write state, as we will need to
* send a byte as well 进入写状态*/
case STATE_WRITE:
/* we are writing data to the device... check for the
* end of the message, and if so, work out what to do
*/
retry_write:
if (!is_msgend(i2c)) {
byte = i2c->msg->buf[i2c->msg_ptr++];
writeb(byte, i2c->regs + S3C2410_IICDS);
/* delay after writing the byte to allow the
* data setup time on the bus, as writing the
* data to the register causes the first bit
* to appear on SDA, and SCL will change as
* soon as the interrupt is acknowledged */
ndelay(i2c->tx_setup);
} else if (!is_lastmsg(i2c)) {
/* we need to go to the next i2c message 推进到下一条消息*/
dev_dbg(i2c->dev, "WRITE: Next Message\n");
i2c->msg_ptr = 0;
i2c->msg_idx ++;
i2c->msg++;
/* check to see if we need to do another message 检查是否要为该消息产生开始位*/
if (i2c->msg->flags & I2C_M_NOSTART) {
if (i2c->msg->flags & I2C_M_RD) {
/* cannot do this, the controller
* forces us to send a new START
* when we change direction */
s3c24xx_i2c_stop(i2c, -EINVAL);
}
goto retry_write;
} else {
/* send the new start 发送新的开始位*/
s3c24xx_i2c_message_start(i2c, i2c->msg);
i2c->state = STATE_START;
}
} else {
/* send stop */
s3c24xx_i2c_stop(i2c, 0);
}
break;
case STATE_READ:
/* we have a byte of data in the data register, do
* something with it, and then work out wether we are
* going to do any more read/write
*/
if (!(i2c->msg->flags & I2C_M_IGNORE_NAK) &&
!(is_msglast(i2c) && is_lastmsg(i2c))) {
if (iicstat & S3C2410_IICSTAT_LASTBIT) {
dev_dbg(i2c->dev, "READ: No Ack\n");
s3c24xx_i2c_stop(i2c, -ECONNREFUSED);
goto out_ack;
}
}
byte = readb(i2c->regs + S3C2410_IICDS);
i2c->msg->buf[i2c->msg_ptr++] = byte;
prepare_read:
if (is_msglast(i2c)) {
/* last byte of buffer */
if (is_lastmsg(i2c))
s3c24xx_i2c_disable_ack(i2c);
} else if (is_msgend(i2c)) {
/* ok, we've read the entire buffer, see if there
* is anything else we need to do */
if (is_lastmsg(i2c)) {
/* last message, send stop and complete */
dev_dbg(i2c->dev, "READ: Send Stop\n");
s3c24xx_i2c_stop(i2c, 0);
} else {
/* go to the next transfer */
dev_dbg(i2c->dev, "READ: Next Transfer\n");
i2c->msg_ptr = 0;
i2c->msg_idx++;
i2c->msg++;
}
}
break;
}
/* acknowlegde the IRQ and get back on with the work */
out_ack:
tmp = readl(i2c->regs + S3C2410_IICCON);
tmp &= ~S3C2410_IICCON_IRQPEND;
writel(tmp, i2c->regs + S3C2410_IICCON);
out:
return ret;
}
/* s3c24xx_i2c_irq
*
* top level IRQ servicing routine
*/
static irqreturn_t s3c24xx_i2c_irq(int irqno, void *dev_id)//适配器中断处理函数
{
struct s3c24xx_i2c *i2c = dev_id;
unsigned long status;
unsigned long tmp;
status = readl(i2c->regs + S3C2410_IICSTAT);
if (status & S3C2410_IICSTAT_ARBITR) {
// deal with arbitration loss
dev_err(i2c->dev, "deal with arbitration loss\n");
}
if (i2c->state == STATE_IDLE) {
dev_dbg(i2c->dev, "IRQ: error i2c->state == IDLE\n");
tmp = readl(i2c->regs + S3C2410_IICCON);
tmp &= ~S3C2410_IICCON_IRQPEND;
writel(tmp, i2c->regs + S3C2410_IICCON);
goto out;
}
/* pretty much this leaves us with the fact that we've
* transmitted or received whatever byte we last sent */
i2s_s3c_irq_nextbyte(i2c, status);//把传输工作进一步推进
out:
return IRQ_HANDLED;
}
/* s3c24xx_i2c_set_master
*
* get the i2c bus for a master transaction
*/
static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c)
{
unsigned long iicstat;
int timeout = 400;
while (timeout-- > 0) {
iicstat = readl(i2c->regs + S3C2410_IICSTAT);
if (!(iicstat & S3C2410_IICSTAT_BUSBUSY))
return 0;
msleep(1);
}
dev_dbg(i2c->dev, "timeout: GPEDAT is %08x\n",
__raw_readl(S3C2410_GPEDAT));
return -ETIMEDOUT;
}
/* s3c24xx_i2c_doxfer
*
* this starts an i2c transfer
*/
static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int num)
{
unsigned long timeout;
int ret;
ret = s3c24xx_i2c_set_master(i2c);//设置为i2c主设备
if (ret != 0) {
dev_err(i2c->dev, "cannot get bus (error %d)\n", ret);
ret = -EAGAIN;
goto out;
}
spin_lock_irq(&i2c->lock);
//初始化s3c24xx_i2c 结构体
i2c->msg = msgs;
i2c->msg_num = num;
i2c->msg_ptr = 0;
i2c->msg_idx = 0;
i2c->state = STATE_START;
s3c24xx_i2c_enable_irq(i2c);//中断使能
s3c24xx_i2c_message_start(i2c, msgs);//启动i2c消息传输
spin_unlock_irq(&i2c->lock);
timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
ret = i2c->msg_idx;
/* having these next two as dev_err() makes life very
* noisy when doing an i2cdetect */
if (timeout == 0)
dev_dbg(i2c->dev, "timeout\n");
else if (ret != num)
dev_dbg(i2c->dev, "incomplete xfer (%d)\n", ret);
/* ensure the stop has been through the bus */
msleep(1);
out:
return ret;
}
/* s3c24xx_i2c_xfer
*
* first port of call from the i2c bus code when an message needs
* transferring across the i2c bus.
*/
//.master_xfer = s3c24xx_i2c_xfer,
static int s3c24xx_i2c_xfer(struct i2c_adapter *adap,
struct i2c_msg *msgs, int num)
{
struct s3c24xx_i2c *i2c = (struct s3c24xx_i2c *)adap->algo_data;
int retry;
int ret;
for (retry = 0; retry < adap->retries; retry++) {
ret = s3c24xx_i2c_doxfer(i2c, msgs, num);//传输i2c消息
if (ret != -EAGAIN)
return ret;
dev_dbg(i2c->dev, "Retrying transmission (%d)\n", retry);
udelay(100);
}
return -EREMOTEIO;
}
/* declare our i2c functionality */
static u32 s3c24xx_i2c_func(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_PROTOCOL_MANGLING;
}
/* i2c bus registration info */
static const struct i2c_algorithm s3c24xx_i2c_algorithm = {
.master_xfer = s3c24xx_i2c_xfer,
.functionality = s3c24xx_i2c_func,
};
static struct s3c24xx_i2c s3c24xx_i2c = {//结构体
.lock = __SPIN_LOCK_UNLOCKED(s3c24xx_i2c.lock),
.wait = __WAIT_QUEUE_HEAD_INITIALIZER(s3c24xx_i2c.wait),
.tx_setup = 50,
.adap = {
.name = "s3c2410-i2c",
.owner = THIS_MODULE,
.algo = &s3c24xx_i2c_algorithm,
.retries = 2,
.class = I2C_CLASS_HWMON,
},
};
/* s3c24xx_i2c_calcdivisor
*
* return the divisor settings for a given frequency
*/
static int s3c24xx_i2c_calcdivisor(unsigned long clkin, unsigned int wanted,
unsigned int *div1, unsigned int *divs)
{
unsigned int calc_divs = clkin / wanted;
unsigned int calc_div1;
if (calc_divs > (16*16))
calc_div1 = 512;
else
calc_div1 = 16;
calc_divs += calc_div1-1;
calc_divs /= calc_div1;
if (calc_divs == 0)
calc_divs = 1;
if (calc_divs > 17)
calc_divs = 17;
*divs = calc_divs;
*div1 = calc_div1;
return clkin / (calc_divs * calc_div1);
}
/* freq_acceptable
*
* test wether a frequency is within the acceptable range of error
*/
static inline int freq_acceptable(unsigned int freq, unsigned int wanted)
{
int diff = freq - wanted;
return (diff >= -2 && diff <= 2);
}
/* s3c24xx_i2c_getdivisor
*
* work out a divisor for the user requested frequency setting,
* either by the requested frequency, or scanning the acceptable
* range of frequencies until something is found
*/
static int s3c24xx_i2c_getdivisor(struct s3c24xx_i2c *i2c,
struct s3c2410_platform_i2c *pdata,
unsigned long *iicon,
unsigned int *got)
{
unsigned long clkin = clk_get_rate(i2c->clk);
unsigned int divs, div1;
int freq;
int start, end;
clkin /= 1000; /* clkin now in KHz */
dev_dbg(i2c->dev, "pdata %p, freq %lu %lu..%lu\n",
pdata, pdata->bus_freq, pdata->min_freq, pdata->max_freq);
if (pdata->bus_freq != 0) {
freq = s3c24xx_i2c_calcdivisor(clkin, pdata->bus_freq/1000,
&div1, &divs);
if (freq_acceptable(freq, pdata->bus_freq/1000))
goto found;
}
/* ok, we may have to search for something suitable... */
start = (pdata->max_freq == 0) ? pdata->bus_freq : pdata->max_freq;
end = pdata->min_freq;
start /= 1000;
end /= 1000;
/* search loop... */
for (; start > end; start--) {
freq = s3c24xx_i2c_calcdivisor(clkin, start, &div1, &divs);
if (freq_acceptable(freq, start))
goto found;
}
/* cannot find frequency spec */
return -EINVAL;
found:
*got = freq;
*iicon |= (divs-1);
*iicon |= (div1 == 512) ? S3C2410_IICCON_TXDIV_512 : 0;
return 0;
}
/* s3c24xx_i2c_init
*
* initialise the controller, set the IO lines and frequency
*/
static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
{
unsigned long iicon = S3C2410_IICCON_IRQEN | S3C2410_IICCON_ACKEN;
struct s3c2410_platform_i2c *pdata;
unsigned int freq;
/* get the plafrom data */
pdata = s3c24xx_i2c_get_platformdata(i2c->adap.dev.parent);
/* inititalise the gpio */
s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_IICSDA);
s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_IICSCL);
/* write slave address */
writeb(pdata->slave_addr, i2c->regs + S3C2410_IICADD);
dev_info(i2c->dev, "slave address 0x%02x\n", pdata->slave_addr);
/* we need to work out the divisors for the clock... */
if (s3c24xx_i2c_getdivisor(i2c, pdata, &iicon, &freq) != 0) {
dev_err(i2c->dev, "cannot meet bus frequency required\n");
return -EINVAL;
}
/* todo - check that the i2c lines aren't being dragged anywhere */
dev_info(i2c->dev, "bus frequency set to %d KHz\n", freq);
dev_dbg(i2c->dev, "S3C2410_IICCON=0x%02lx\n", iicon);
writel(iicon, i2c->regs + S3C2410_IICCON);
/* check for s3c2440 i2c controller */
if (s3c24xx_i2c_is2440(i2c)) {
dev_dbg(i2c->dev, "S3C2440_IICLC=%08x\n", pdata->sda_delay);
writel(pdata->sda_delay, i2c->regs + S3C2440_IICLC);
}
return 0;
}
/* s3c24xx_i2c_probe
*初始化适配器硬件
* called by the bus driver when a suitable device is found
*/
static int s3c24xx_i2c_probe(struct platform_device *pdev)
{
struct s3c24xx_i2c *i2c = &s3c24xx_i2c;
struct resource *res;
int ret;
/* find the clock and enable it 发现时钟并使能它*/
i2c->dev = &pdev->dev;
i2c->clk = clk_get(&pdev->dev, "i2c");
if (IS_ERR(i2c->clk)) {
dev_err(&pdev->dev, "cannot get clock\n");
ret = -ENOENT;
goto err_noclk;
}
dev_dbg(&pdev->dev, "clock source %p\n", i2c->clk);
clk_enable(i2c->clk);
/* map the registers 映射寄存器*/
//申请i2c适配器使用的i/o地址
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL) {
dev_err(&pdev->dev, "cannot find IO resource\n");
ret = -ENOENT;
goto err_clk;
}
//请求内存区域
i2c->ioarea = request_mem_region(res->start, (res->end-res->start)+1,
pdev->name);
if (i2c->ioarea == NULL) {
dev_err(&pdev->dev, "cannot request IO\n");//控制输出信息
ret = -ENXIO;
goto err_clk;
}
//物理地址到虚拟地址的映射
i2c->regs = ioremap(res->start, (res->end-res->start)+1);
if (i2c->regs == NULL) {
dev_err(&pdev->dev, "cannot map IO\n");
ret = -ENXIO;
goto err_ioarea;
}
dev_dbg(&pdev->dev, "registers %p (%p, %p)\n", i2c->regs, i2c->ioarea, res);
/* setup info block for the i2c core 设置i2c核心需要的信息*/
i2c->adap.algo_data = i2c;
i2c->adap.dev.parent = &pdev->dev;
/* initialise the i2c controller */
ret = s3c24xx_i2c_init(i2c);
if (ret != 0)
goto err_iomap;
/* find the IRQ for this unit (note, this relies on the init call to
* ensure no current IRQs pending
*/
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (res == NULL) {
dev_err(&pdev->dev, "cannot find IRQ\n");
ret = -ENOENT;
goto err_iomap;
}
//申请中断
ret = request_irq(res->start, s3c24xx_i2c_irq, IRQF_DISABLED,
pdev->name, i2c);
if (ret != 0) {
dev_err(&pdev->dev, "cannot claim IRQ\n");
goto err_iomap;
}
i2c->irq = res;
dev_dbg(&pdev->dev, "irq resource %p (%lu)\n", res,
(unsigned long)res->start);
ret = i2c_add_adapter(&i2c->adap);//增加i2c_adapter适配器
if (ret < 0) {
dev_err(&pdev->dev, "failed to add bus to i2c core\n");
goto err_irq;
}
platform_set_drvdata(pdev, i2c);
dev_info(&pdev->dev, "%s: S3C I2C adapter\n", i2c->adap.dev.bus_id);
return 0;
err_irq:
free_irq(i2c->irq->start, i2c);
err_iomap:
iounmap(i2c->regs);
err_ioarea:
release_resource(i2c->ioarea);
kfree(i2c->ioarea);
err_clk:
clk_disable(i2c->clk);
clk_put(i2c->clk);
err_noclk:
return ret;
}
/* s3c24xx_i2c_remove
*
* called when device is removed from the bus
*/
static int s3c24xx_i2c_remove(struct platform_device *pdev)
{
struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
i2c_del_adapter(&i2c->adap);
free_irq(i2c->irq->start, i2c);
clk_disable(i2c->clk);
clk_put(i2c->clk);
iounmap(i2c->regs);
release_resource(i2c->ioarea);
kfree(i2c->ioarea);
return 0;
}
#ifdef CONFIG_PM
static int s3c24xx_i2c_resume(struct platform_device *dev)
{
struct s3c24xx_i2c *i2c = platform_get_drvdata(dev);
if (i2c != NULL)
s3c24xx_i2c_init(i2c);
return 0;
}
#else
#define s3c24xx_i2c_resume NULL
#endif
/* device driver for platform bus bits */
static struct platform_driver s3c2410_i2c_driver = {
.probe = s3c24xx_i2c_probe,
.remove = s3c24xx_i2c_remove,
.resume = s3c24xx_i2c_resume,
.driver = {
.owner = THIS_MODULE,
.name = "s3c2410-i2c",
},
};
static struct platform_driver s3c2440_i2c_driver = {//platform_driver结构体
.probe = s3c24xx_i2c_probe,
.remove = s3c24xx_i2c_remove,
.resume = s3c24xx_i2c_resume,
.driver = {
.owner = THIS_MODULE,
.name = "s3c2440-i2c",
},
};
static int __init i2c_adap_s3c_init(void)
{
int ret;
ret = platform_driver_register(&s3c2410_i2c_driver);//注册
if (ret == 0) {
ret = platform_driver_register(&s3c2440_i2c_driver);
if (ret)
platform_driver_unregister(&s3c2410_i2c_driver);
}
return ret;
}
static void __exit i2c_adap_s3c_exit(void)
{
platform_driver_unregister(&s3c2410_i2c_driver);
platform_driver_unregister(&s3c2440_i2c_driver);
}
module_init(i2c_adap_s3c_init);
module_exit(i2c_adap_s3c_exit);
MODULE_DESCRIPTION("S3C24XX I2C Bus driver");
MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
MODULE_LICENSE("GPL");
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/string.h>
#include <linux/rtc.h> /* get the user-level API */
#include <linux/bcd.h>
#include <linux/list.h>
static unsigned short ignore[] = { I2C_CLIENT_END };
/* 每个I2C设备都有一个规定的地址,看芯片手册 */
static unsigned short at24c02_addr[] = { 0x50, I2C_CLIENT_END };
static struct i2c_driver at24c02_driver;
static struct i2c_client_address_data at24c02_addr_data = {
.normal_i2c = at24c02_addr,
.probe = ignore,
.ignore = ignore,
};
static struct i2c_client *at24c02_client;
static char name[] = "at24c02";
static int major;
static struct class *at24c02_class;
static unsigned char at24c02_buf[1024];
static int at24c02_read_byte(struct i2c_client *client, u8 reg, u8 *value)
{
s32 tmp = i2c_smbus_read_byte_data(client, reg);
if (tmp < 0)
return -EIO;
*value = tmp;
return 0;
}
static int at24c02_write_byte(struct i2c_client *client, u8 reg, u8 value)
{
s32 tmp = i2c_smbus_write_byte_data(client, reg, value);
if (tmp < 0)
return -EIO;
return 0;
}
static int at24c02_read(struct file *filp, char __user *buff,
size_t count, loff_t *offp)
{
int ret;
struct i2c_msg msg[2];
char addr = 0;
if (count > 1024)
{
return -EINVAL;
}
/* 先写地址 */
msg[0].addr = at24c02_client->addr;
msg[0].flags = 0; /* 0 表示写 */
msg[0].len = 1; /* 1个地址 */
msg[0].buf = &addr;
/* 再读数据 */
msg[1].addr = at24c02_client->addr;
msg[1].flags = I2C_M_RD; /* 1: 表示读 */
msg[1].len = count; /* 要读的数据个数 */
msg[1].buf = at24c02_buf;
ret = i2c_transfer(at24c02_client->adapter, msg, 2);
if (ret == 2)
{
copy_to_user(buff, at24c02_buf, count);
return count;
}
else
return -EIO;
}
static ssize_t at24c02_write(struct file *filp, const char __user *buff, size_t count, loff_t *offp)
{
int ret;
struct i2c_msg msg[1];
if (count > 1024)
{
return -EINVAL;
}
copy_from_user(&at24c02_buf[1], buff, count);
at24c02_buf[0] = 0; /* 表示写到哪里 */
msg[0].addr = at24c02_client->addr;
msg[0].flags = 0; /* 0 表示写 */
msg[0].len = count + 1; /* 1个地址+count个数据 */
msg[0].buf = at24c02_buf;
ret = i2c_transfer(at24c02_client->adapter, msg, 1);
if (ret == 1)
return count;
else
return -EIO;
}
static struct file_operations at24c02_fops = {
.owner = THIS_MODULE, /* 这是一个宏,指向编译模块时自动创建的__this_module变量 */
.read = at24c02_read,
.write = at24c02_write,
};
static int at24c02_detect(struct i2c_adapter *adap, int addr, int kind)
{
int rc;
u8 value;
printk("at24c02_detect\n");
/* 分配一个i2c_client结构体 */
at24c02_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
if (!at24c02_client)
return -ENOMEM;
strncpy(at24c02_client->name, name, strlen(name)+1);
at24c02_client->addr = addr; /* 0x50 */
at24c02_client->adapter = adap;
at24c02_client->driver = &at24c02_driver;
#if 0
/* 发出I2C信号, 进一步确定at24c02是否存在 */
rc = at24c02_read_byte(at24c02_client, 0, &value);
if (0 != rc)
{
printk("AT24C02 not exist\n");
kfree(at24c02_client);
return -ENODEV;
}
printk("Detect AT24C02\n");
#endif
/* 注册i2c_client */
if ((rc = i2c_attach_client(at24c02_client)) != 0) {
kfree(at24c02_client);
return rc;
}
/* register_chrdev,.. */
major = register_chrdev(0, "at24c02", &at24c02_fops);
// 构造供udev/mdev创建设备节点用的信息
at24c02_class = class_create(THIS_MODULE, "at24c02");
if (IS_ERR(at24c02_class))
{
unregister_chrdev(major, "buttons");
return -1;
}
class_device_create(at24c02_class, NULL, MKDEV(major, 0), NULL, "at24c02");
return 0;
}
/* 识别/枚举 I2C设备 */
static int at24c02_attach_adapter(struct i2c_adapter *adapter)
{
/* i2c_probe首先会确定是否存在地址为0x50的设备
* 如果存在, 则使用at24c02_detect进一步处理
*/
return i2c_probe(adapter, &at24c02_addr_data, at24c02_detect);
}
static int at24c02_detach_client(struct i2c_client *client)
{
int err;
if ((err = i2c_detach_client(at24c02_client)))
return err;
kfree(at24c02_client);
unregister_chrdev(major, "at24c02");
class_device_destroy(at24c02_class, MKDEV(major, 0));
class_destroy(at24c02_class);
return 0;
}
/* 1. 构造i2c_driver */
static struct i2c_driver at24c02_driver = {
.driver = {
.name = "at24c02",
},
.attach_adapter = at24c02_attach_adapter,
.detach_client = at24c02_detach_client,
};
int at24c02_init(void)
{
i2c_add_driver(&at24c02_driver);
return 0;
}
void at24c02_exit(void)
{
i2c_del_driver(&at24c02_driver);
}
module_init(at24c02_init);
module_exit(at24c02_exit);
MODULE_LICENSE("GPL");
测试程序:
#include <stdio.h>
#include <stdlib.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
/* at24c02_test r
* at24c02_test w val
*/
void print_usage(char *str)
{
printf("%s r : read at24c02 addresss 0\n", str);
printf("%s w val : write at24c02 addresss 0\n", str);
}
int main(int argc, char **argv)
{
int fd;
int ret;
unsigned char buf[100];
if (argc < 2)
{
print_usage(argv[0]);
return -1;
}
fd = open("/dev/at24c02", O_RDWR);
if (fd < 0)
{
printf("can't open /dev/at24c02\n");
return -1;
}
if (strcmp(argv[1], "r") == 0)
{
ret = read(fd, buf, 100);
if (ret == 100)
{
printf("get data: %s\n", buf);
return 0;
}
else
{
printf("can't get data\n");
return -1;
}
}
else if ((strcmp(argv[1], "w") == 0) && (argc == 3))
{
ret = write(fd, argv[2], strlen(argv[2]) + 1);
if (ret >= 0)
{
printf("write data ok!\n");
return 0;
}
else
{
printf("can't write\n");
return -1;
}
}
return 0;
}
1. at24c02_1.c
加载后,会打印:Detect AT24C02
修改at24c02_addr里的0x50为0x60,at24c02_detect不会被调用, 这表明:
/* i2c_probe首先会确定是否存在地址为0x50的设备
* 如果存在, 则使用at24c02_detect进一步处理
*/
return i2c_probe(adapter, &at24c02_addr_data, at24c02_detect);
2. at24c02_2.c
at24c02_test r
at24c02_test w 0x12
at24c02_test r /* 可以读出0x12 */
3. at24c02_2.c
at24c02_test r
at24c02_test w abcdef
at24c02_test r /* 可以读出"abcdef" */
来源:http://blog.csdn.net/huang879135/article/details/6632960