linux网卡流量检测工具

文件说明：
streak.sh：以“K”为流量单位的Linux网卡检测工具。
stream.sh：以“M”为流量单位的Linux网卡检测工具。

使用方法：
chmod a+x streak.sh stream.sh

./streak.sh或./stream.sh

工具说明：
此工具截取了Linux系统文件夹/proc/net/dev中的网卡部分信息并按格式打印。
打印结果与下一次取值进行对比，对比时间间隔为1秒。
并将取值进行单位换算，得到以K或M为单位的输出。
加入了read读取网口的环境变量，减小了工作量。

 

#! /bin/bash
read -p "Enter your net port:[eth0|eth1|eth2]" ifcfg
typeset in in_old dif_in dif_in1 dif_out1
typeset out out_old dif_out

in_old=$(cat /proc/net/dev | grep $ifcfg | sed  's=^.*:==' | awk '{ print $1 }' )
out_old=$(cat /proc/net/dev | grep $ifcfg | sed  's=^.*:=='  | awk '{ print $9 }')

while true
do
         sleep 1
         in=$(cat /proc/net/dev | grep $ifcfg | sed  's=^.*:=='  | awk '{ print $1 }')
         out=$(cat /proc/net/dev | grep $ifcfg | sed  's=^.*:=='  | awk '{ print $9 }')
         dif_in=$((in-in_old))
         dif_in1=$((dif_in * 8 / 1024 ))
         dif_out=$((out-out_old))
         echo "                                         IN: ${dif_in} bytes     OUT: ${dif_out} bytes "
         dif_out1=$((dif_out * 8 / 1024 ))
         echo "IN: ${dif_in1} kbps    OUT: ${dif_out1} kbps"
         in_old=${in}
         out_old=${out}
done


#运行效果：
# ./streak.sh
                                                IN: 349179 bytes     OUT: 1363936 bytes 
#IN: 2 kbps    OUT: 10 kbps
                                                IN: 349612 bytes     OUT: 1361852 bytes 
#IN: 2 kbps    OUT: 10 kbps
                                                IN: 348684 bytes     OUT: 1358952 bytes 
#IN: 2 kbps    OUT: 10 kbps
                                                IN: 349998 bytes     OUT: 1359092 bytes 

#! /bin/bash
read -p "Enter your net port:[eth0|eth1|eth2]" ifcfg
typeset in in_old dif_in dif_in1 dif_out1
typeset out out_old dif_out
in_old=$(cat /proc/net/dev | grep $ifcfg | sed  's=^.*:==' | awk '{ print $1 }' )
out_old=$(cat /proc/net/dev | grep $ifcfg | sed  's=^.*:=='  | awk '{ print $9 }')
while true
do
         sleep 1
         in=$(cat /proc/net/dev | grep $ifcfg | sed  's=^.*:=='  | awk '{ print $1 }')
         out=$(cat /proc/net/dev | grep $ifcfg | sed  's=^.*:=='  | awk '{ print $9 }')
         dif_in=$((in-in_old))
         dif_in1=$((dif_in * 8 / 1024 /1024 ))
         dif_out=$((out-out_old))
         echo "                                         IN: ${dif_in} bytes     OUT: ${dif_out} bytes "
         dif_out1=$((dif_out * 8 / 1024 /1024 ))
         echo "IN: ${dif_in1} mbps    OUT: ${dif_out1} mbps"
         in_old=${in}
         out_old=${out}
done

#运行效果：
# ./stream.sh 
                                                IN: 349179 bytes     OUT: 1363936 bytes 
#IN: 2 mbps    OUT: 10 mbps
                                                IN: 349612 bytes     OUT: 1361852 bytes 
#IN: 2 mbps    OUT: 10 mbps
                                                IN: 348684 bytes     OUT: 1358952 bytes 
#IN: 2 mbps    OUT: 10 mbps
                                                IN: 349998 bytes     OUT: 1359092 bytes