Redis 集群是一个提供在多个Redis间节点间共享数据的程序集.redis3.0以前,只支持主从同步的,如果主的挂了,写入就成问题了。3.0出来后就可以很好帮我们解决这个问题。
目前redis 3.0还不稳定,如果要用在生产环境中,要慎重。
一.redis服务器说明
192.168.10.219 6379
192.168.10.219 6380
192.168.10.219 6381
192.168.10.220 6382
192.168.10.220 6383
192.168.10.220 6384
要让集群正常运作至少需要三个主节点,不过在刚开始试用集群功能时, 强烈建议使用六个节点: 其中三个为主节点, 而其余三个则是各个主节点的从节点。所有用二台机器,开6个redis进程,模拟6台机器。
二.安装ruby,rubygems
# yum -y install gcc openssl-devel libyaml-devel libffi-devel readline-devel zlib-devel gdbm-devel ncurses-devel gcc-c++ automake autoconf
# yum -y install ruby rubygems //安装ruby rubygems
//换源
# gem source -l
# gem source --remove http://rubygems.org/
# gem sources -a http://ruby.taobao.org/
# gem source -l
# gem install redis --version 3.0.0 //安装gem_redis
Successfully installed redis-3.0.0
1 gem installed
Installing ri documentation for redis-3.0.0...
Installing RDoc documentation for redis-3.0.0...
以前写过一篇ruby on rails的文章,请参考:centos ruby on rails apache mysql 安装配置详解
喜欢手动编译的人,可以参考这篇文章,安装ruby.
三.安装redis3.0.0
1,安装redis
# wget http://download.redis.io/releases/redis-3.0.0.tar.gz
# tar -xvzf redis-3.0.0.tar.gz
# cd redis-3.0.0
# make && make install
# cd src
# cp redis-trib.rb /usr/local/bin
# mkdir /etc/redis
# mkdir /var/log/redis
上述操作要先在二台机器上面都操作好。
2,配置redis
[root@slave2 redis-3.0.0]# vim redis.conf //解压的根目录,有redis.conf,做以下修改
port 6379
pidfile /var/run/redis-6379.pid
dbfilename dump-6379.rdb
appendfilename "appendonly-6379.aof"
cluster-config-file nodes-6379.conf
cluster-enabled yes
cluster-node-timeout 5000
appendonly yes
3,copy配置文件,并修改端口
# cp redis.conf /etc/redis/redis-6379.conf
# cp redis.conf /etc/redis/redis-6380.conf
# cp redis.conf /etc/redis/redis-6381.conf
# scp redis.conf 192.168.10.220:/etc/redis/redis-6382.conf
# scp redis.conf 192.168.10.220:/etc/redis/redis-6383.conf
# scp redis.conf 192.168.10.220:/etc/redis/redis-6384.conf
# sed -i "s/6379/6380/g" /etc/redis/redis-6380.conf
# sed -i "s/6379/6381/g" /etc/redis/redis-6381.conf
# sed -i "s/6379/6382/g" /etc/redis/redis-6382.conf
# sed -i "s/6379/6383/g" /etc/redis/redis-6383.conf
# sed -i "s/6379/6384/g" /etc/redis/redis-6384.conf
将配置文件分别copy到二台机器上,并替换端口:
# cat redis-6380.conf |awk '{if($0 !~ /^$/ && $0 !~ /#/) {print $0}}' |grep 6380
pidfile /var/run/redis-6380.pid
port 6380
dbfilename dump-6380.rdb
appendfilename "appendonly-6380.aof"
cluster-config-file nodes-6380.conf
有5处修改端口的地方
4,启动并查看redis
# redis-server /etc/redis/redis-6379.conf > /var/log/redis/redis-6379.log 2>&1 &
# redis-server /etc/redis/redis-6380.conf > /var/log/redis/redis-6380.log 2>&1 &
# redis-server /etc/redis/redis-6381.conf > /var/log/redis/redis-6381.log 2>&1 &
# redis-server /etc/redis/redis-6382.conf > /var/log/redis/redis-6382.log 2>&1 &
# redis-server /etc/redis/redis-6383.conf > /var/log/redis/redis-6383.log 2>&1 &
# redis-server /etc/redis/redis-6384.conf > /var/log/redis/redis-6384.log 2>&1 &
# netstat -tpnl |grep redis
tcp 0 0 0.0.0.0:6379 0.0.0.0:* LISTEN 7298/redis-server *
tcp 0 0 0.0.0.0:6380 0.0.0.0:* LISTEN 7299/redis-server *
tcp 0 0 0.0.0.0:6381 0.0.0.0:* LISTEN 7304/redis-server *
tcp 0 0 0.0.0.0:16379 0.0.0.0:* LISTEN 7298/redis-server *
tcp 0 0 0.0.0.0:16380 0.0.0.0:* LISTEN 7299/redis-server *
tcp 0 0 0.0.0.0:16381 0.0.0.0:* LISTEN 7304/redis-server *
tcp 0 0 :::6379 :::* LISTEN 7298/redis-server *
tcp 0 0 :::6380 :::* LISTEN 7299/redis-server *
tcp 0 0 :::6381 :::* LISTEN 7304/redis-server *
tcp 0 0 :::16379 :::* LISTEN 7298/redis-server *
tcp 0 0 :::16380 :::* LISTEN 7299/redis-server *
tcp 0 0 :::16381 :::* LISTEN 7304/redis-server *
[root@slave2 redis]# ll /etc/redis/
总用量 156
-rw-r--r-- 1 root root 0 4月 30 23:54 appendonly-6379.aof
-rw-r--r-- 1 root root 0 5月 1 00:08 appendonly-6380.aof
-rw-r--r-- 1 root root 0 5月 1 00:08 appendonly-6381.aof
-rw-r--r-- 1 root root 18 5月 1 00:08 dump-6379.rdb
-rw-r--r-- 1 root root 18 5月 1 00:08 dump-6380.rdb
-rw-r--r-- 1 root root 18 5月 1 00:08 dump-6381.rdb
-rw-r--r-- 1 root root 763 5月 1 00:08 nodes-6379.conf
-rw-r--r-- 1 root root 763 5月 1 00:08 nodes-6380.conf
-rw-r--r-- 1 root root 763 5月 1 00:08 nodes-6381.conf
-rw-r--r-- 1 root root 41412 4月 30 23:30 redis-6379.conf
-rw-r--r-- 1 root root 41412 4月 30 23:39 redis-6380.conf
-rw-r--r-- 1 root root 41412 4月 30 23:39 redis-6381.conf
所有节点都启动成功,并不代表,他们就是集群了。
四.创建集群,并查看
1,创建redis集群
# redis-trib.rb create --replicas 1 192.168.10.219:6379 192.168.10.219:6380 192.168.10.219:6381 192.168.10.220:6382 192.168.10.220:6383 192.168.10.220:6384
2,查看redis集群状态
[root@slave2 redis]# redis-trib.rb check 192.168.10.219:6379
Connecting to node 192.168.10.219:6379: OK
Connecting to node 192.168.10.220:6384: OK
Connecting to node 192.168.10.219:6381: OK
Connecting to node 192.168.10.220:6383: OK
Connecting to node 192.168.10.220:6382: OK
Connecting to node 192.168.10.219:6380: OK
>>> Performing Cluster Check (using node 192.168.10.219:6379)
M: d40d9a367c24784b0336c7b80fb4c87337e2cba6 192.168.10.219:6379
slots:5461-10922 (5462 slots) master
1 additional replica(s)
S: 5f00f163d0c0a540ea99daf004f55588a802327b 192.168.10.220:6384
slots: (0 slots) slave
replicates d40d9a367c24784b0336c7b80fb4c87337e2cba6
S: b3b1a848987b5a87a06888e126d5c9b16f871ff5 192.168.10.219:6381
slots: (0 slots) slave
replicates d2eb5a8a77f87888792428aed4692dfb907e7a1d
M: d2eb5a8a77f87888792428aed4692dfb907e7a1d 192.168.10.220:6383
slots:10923-16383 (5461 slots) master
1 additional replica(s)
M: a8eafe8b19d6a28c034917da13a43ce1230fe870 192.168.10.220:6382
slots:0-5460 (5461 slots) master
1 additional replica(s)
S: a87d207204a53ab599bf7f6ffb9d679d0eef4f25 192.168.10.219:6380
slots: (0 slots) slave
replicates a8eafe8b19d6a28c034917da13a43ce1230fe870
[OK] All nodes agree about slots configuration.
>>> Check for open slots...
>>> Check slots coverage...
[OK] All 16384 slots covered.
到这儿,redis集群就配置成功了
五,测试redis集群
# redis-cli -c -p 6379 -h 192.168.10.219 //在219登录
192.168.10.219:6379> set tank tank1 //设置测试值
-> Redirected to slot [4407] located at 192.168.10.220:6382
OK //直接转向到220 6382端口,数据存到了220 6382,不过有点奇怪
192.168.10.220:6382> get tank //可以取到值
"tank1"
[root@manage redis]# redis-cli -c -p 6383 -h 192.168.10.220 //220机器,6383端口
192.168.10.220:6383> get tank
-> Redirected to slot [4407] located at 192.168.10.220:6382 //直接转向220 6382端口
"tank1"
[root@manage redis]# ps aux |grep redis //查看进程
root 7310 0.2 0.9 137436 9724 pts/0 Sl Apr30 0:09 redis-server *:6382 [cluster]
root 7311 0.2 0.9 137436 9776 pts/0 Sl Apr30 0:09 redis-server *:6383 [cluster]
root 7316 0.2 0.9 137436 9944 pts/0 Sl Apr30 0:10 redis-server *:6384 [cluster]
root 7478 0.0 0.0 103256 812 pts/0 S+ 00:56 0:00 grep redis
[root@manage redis]# kill -9 7310 //关闭220 6382端口,看数据会不会丢失
[root@slave2 redis]# redis-trib.rb check 192.168.10.219:6379 //查看集群情况,任何接口都行
Connecting to node 192.168.10.219:6379: OK
Connecting to node 192.168.10.220:6384: OK
Connecting to node 192.168.10.219:6381: OK
Connecting to node 192.168.10.220:6383: OK
Connecting to node 192.168.10.219:6380: OK
>>> Performing Cluster Check (using node 192.168.10.219:6379)
M: d40d9a367c24784b0336c7b80fb4c87337e2cba6 192.168.10.219:6379
slots:5461-10922 (5462 slots) master
1 additional replica(s)
S: 5f00f163d0c0a540ea99daf004f55588a802327b 192.168.10.220:6384
slots: (0 slots) slave
replicates d40d9a367c24784b0336c7b80fb4c87337e2cba6
S: b3b1a848987b5a87a06888e126d5c9b16f871ff5 192.168.10.219:6381
slots: (0 slots) slave
replicates d2eb5a8a77f87888792428aed4692dfb907e7a1d
M: d2eb5a8a77f87888792428aed4692dfb907e7a1d 192.168.10.220:6383
slots:10923-16383 (5461 slots) master
1 additional replica(s)
M: a87d207204a53ab599bf7f6ffb9d679d0eef4f25 192.168.10.219:6380
slots:0-5460 (5461 slots) master
0 additional replica(s)
[OK] All nodes agree about slots configuration.
>>> Check for open slots...
>>> Check slots coverage...
[OK] All 16384 slots covered. //变成,三主二从了
[root@slave2 redis]# redis-cli -c -p 6379 -h 192.168.10.219 //219登录
192.168.10.219:6379> get tank
-> Redirected to slot [4407] located at 192.168.10.219:6380 //数据被转到了6380节点了
"tank1"
经测试,集群是可用的。
作者:海底苍鹰,地址:http://blog.51yip.com/nosql/1725.html