使用kubeadm在Centos8上部署kubernetnes1.18

Centos8系统发布已有一段时间，不少小伙伴开始上手使用。kubernetes1.18也发布了，今天作者使用kubeadm在Centos8系统上部署kubernetes。

1 系统准备

查看系统版本

[root@localhost]# cat /etc/centos-release
CentOS Linux release 8.1.1911 (Core)

配置网络

[root@localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-enp0s3
TYPE=Ethernet
PROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=static
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy
NAME=enp0s3
UUID=039303a5-c70d-4973-8c91-97eaa071c23d
DEVICE=enp0s3
ONBOOT=yes
IPADDR=192.168.122.21
NETMASK=255.255.255.0
GATEWAY=192.168.122.1
DNS1=223.5.5.5

添加阿里源

[root@localhost ~]# rm -rfv /etc/yum.repos.d/*
[root@localhost ~]# curl -o /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-8.repo

配置主机名

[root@master01 ~]# cat /etc/hosts
127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.122.21 master01.paas.com master01

关闭swap，注释swap分区

[root@master01 ~]# swapoff -a
[root@master01 ~]# cat /etc/fstab

#
# /etc/fstab
# Created by anaconda on Tue Mar 31 22:44:34 2020
#
# Accessible filesystems, by reference, are maintained under '/dev/disk/'.
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info.
#
# After editing this file, run 'systemctl daemon-reload' to update systemd
# units generated from this file.
#
/dev/mapper/cl-root     /                       xfs     defaults        0 0
UUID=5fecb240-379b-4331-ba04-f41338e81a6e /boot                   ext4    defaults        1 2
/dev/mapper/cl-home     /home                   xfs     defaults        0 0
#/dev/mapper/cl-swap     swap                    swap    defaults        0 0

配置内核参数，将桥接的IPv4流量传递到iptables的链

[root@master01 ~]# cat > /etc/sysctl.d/k8s.conf <<EOF
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOF
sysctl --system

2 安装常用包

[root@master01 ~]# yum install vim bash-completion net-tools gcc -y

3 使用aliyun源安装docker-ce

[root@master01 ~]# yum install -y yum-utils device-mapper-persistent-data lvm2
[root@master01 ~]# yum-config-manager --add-repo https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
[root@master01 ~]# yum -y install docker-ce

安装docker-ce如果出现以下错

[root@master01 ~]# yum -y install docker-ce
CentOS-8 - Base - mirrors.aliyun.com                                                                               14 kB/s | 3.8 kB     00:00
CentOS-8 - Extras - mirrors.aliyun.com                                                                            6.4 kB/s | 1.5 kB     00:00
CentOS-8 - AppStream - mirrors.aliyun.com                                                                          16 kB/s | 4.3 kB     00:00
Docker CE Stable - x86_64                                                                                          40 kB/s |  22 kB     00:00
Error:
 Problem: package docker-ce-3:19.03.8-3.el7.x86_64 requires containerd.io >= 1.2.2-3, but none of the providers can be installed
  - cannot install the best candidate for the job
  - package containerd.io-1.2.10-3.2.el7.x86_64 is excluded
  - package containerd.io-1.2.13-3.1.el7.x86_64 is excluded
  - package containerd.io-1.2.2-3.3.el7.x86_64 is excluded
  - package containerd.io-1.2.2-3.el7.x86_64 is excluded
  - package containerd.io-1.2.4-3.1.el7.x86_64 is excluded
  - package containerd.io-1.2.5-3.1.el7.x86_64 is excluded
  - package containerd.io-1.2.6-3.3.el7.x86_64 is excluded
(try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages)

解决方法

[root@master01 ~]# wget https://download.docker.com/linux/centos/7/x86_64/edge/Packages/containerd.io-1.2.6-3.3.el7.x86_64.rpm
[root@master01 ~]# yum install containerd.io-1.2.6-3.3.el7.x86_64.rpm

然后再安装docker-ce即可成功
添加aliyundocker仓库加速器

[root@master01 ~]# mkdir -p /etc/docker
[root@master01 ~]# tee /etc/docker/daemon.json <<-'EOF'
{
  "registry-mirrors": ["https://fl791z1h.mirror.aliyuncs.com"]
}
EOF
[root@master01 ~]# systemctl daemon-reload
[root@master01 ~]# systemctl restart docker

4 安装kubectl、kubelet、kubeadm

添加阿里kubernetes源

[root@master01 ~]# cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF

安装

[root@master01 ~]# yum install kubectl kubelet kubeadm
[root@master01 ~]# systemctl enable kubelet

5 初始化k8s集群

[root@master01 ~]# kubeadm init --kubernetes-version=1.18.0  \
--apiserver-advertise-address=192.168.122.21   \
--image-repository registry.aliyuncs.com/google_containers  \
--service-cidr=10.10.0.0/16 --pod-network-cidr=10.122.0.0/16

POD的网段为: 10.122.0.0/16， api server地址就是master本机IP。

这一步很关键，由于kubeadm 默认从官网k8s.grc.io下载所需镜像，国内无法访问，因此需要通过–image-repository指定阿里云镜像仓库地址。

集群初始化成功后返回如下信息：

W0408 09:36:36.121603   14098 configset.go:202] WARNING: kubeadm cannot validate component configs for API groups [kubelet.config.k8s.io kubeproxy.config.k8s.io]
[init] Using Kubernetes version: v1.18.0
[preflight] Running pre-flight checks
        [WARNING FileExisting-tc]: tc not found in system path
[preflight] Pulling images req