NAT的基本步骤，能够节省公有地址

LSW1
undo terminal monitor
Info: Current terminal monitor is off.
sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys SW1
[SW1]vlan bat 10 20 30 40
Info: This operation may take a few seconds. Please wait for a moment…done.
[SW1]int g0/0/1
[SW1-GigabitEthernet0/0/1]port link-type access
[SW1-GigabitEthernet0/0/1]port default vlan 10
[SW1-GigabitEthernet0/0/1]int g0/0/2
[SW1-GigabitEthernet0/0/2]port link-type access
[SW1-GigabitEthernet0/0/2]port default vlan 20
[SW1-GigabitEthernet0/0/2]int g0/0/3
[SW1-GigabitEthernet0/0/3]port link-type access
[SW1-GigabitEthernet0/0/3]port default vlan 30
[SW1-GigabitEthernet0/0/3]int g0/0/4
[SW1-GigabitEthernet0/0/4]port link-type access
[SW1-GigabitEthernet0/0/4]port default vlan 20
[SW1-GigabitEthernet0/0/4]int g0/0/5
[SW1-GigabitEthernet0/0/5]port link-type access
[SW1-GigabitEthernet0/0/5]port default vlan 40
[SW1-GigabitEthernet0/0/5]int g0/0/6
[SW1-GigabitEthernet0/0/6]port link-type access
[SW1-GigabitEthernet0/0/6]port default vlan 10
[SW1-GigabitEthernet0/0/6]q
[SW1]int vlanif 10
[SW1-Vlanif10]ip add 192.168.10.1 24
[SW1-Vlanif10]int vlanif 20
[SW1-Vlanif20]ip add 192.168.20.1 24
[SW1-Vlanif20]int vlanif 30
[SW1-Vlanif30]ip add 192.168.30.1 24
[SW1-Vlanif30]int vlanif 40
[SW1-Vlanif40]ip add 11.0.0.2 24
[SW1-Vlanif40]q
[SW1]int vlanif 40
[SW1-Vlanif40]undo shutdown
Info: Interface Vlanif40 is not shutdown.
[SW1-Vlanif40]q
[SW1]ip route-static 0.0.0.0 0.0.0.0 11.0.0.1
[SW1]quit

R2
undo terminal monitor
Info: Current terminal monitor is off.
sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys R1
[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]ip add 11.0.0.1 24
[R1-GigabitEthernet0/0/0]undo shutdown
Info: Interface GigabitEthernet0/0/0 is not shutdown.
[R1-GigabitEthernet0/0/0]int g0/0/1
[R1-GigabitEthernet0/0/1]ip add 12.0.0.1 24
[R1-GigabitEthernet0/0/1]undo shutdown
Info: Interface GigabitEthernet0/0/1 is not shutdown.
[R1-GigabitEthernet0/0/1]q
[R1]ip route-static 0.0.0.0 0.0.0.0 12.0.0.2
[R1]int g0/0/1
[R1-GigabitEthernet0/0/1]nat static global 8.8.8.8 inside 192.168.10.10
[R1]ip route-static 192.168.10.0 24 11.0.0.2
[R1]nat address-group 1 212.0.0.100 212.0.0.200
[R1]acl 2000
[R1-acl-basic-2000]rule permit source 192.168.20.0 0.0.0.255
[R1-acl-basic-2000]rule permit source 11.0.0.0 0.0.0.255
[R1-acl-basic-2000]int g0/0/1
[R1-GigabitEthernet0/0/1]nat outbound 2000 address-group 1 no-pat
[R1-GigabitEthernet0/0/1]q
[R1]ip route-static 192.168.20.0 24 11.0.0.2
[R1]acl 3000
[R1-acl-adv-3000]rule permit ip source 192.168.30.0 0.0.0.255
[R1-acl-adv-3000]int g0/0/1
[R1-GigabitEthernet0/0/1]nat outbound 3000
[R1-GigabitEthernet0/0/1]q
[R1]ip route-static 192.168.30.0 24 11.0.0.2
[R1]int g0/0/1
[R1-GigabitEthernet0/0/1]nat server protocol tcp global 9.9.9.9 www inside 192.168.10.100 www
[R1-GigabitEthernet0/0/1]q

R2
undo terminal monitor
Info: Current terminal monitor is off.
sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys R2
[R2]int g0/0/0
[R2-GigabitEthernet0/0/0]ip add 12.0.0.2 24
[R2-GigabitEthernet0/0/0]undo shutdown
Info: Interface GigabitEthernet0/0/0 is not shutdown.
[R2-GigabitEthernet0/0/0]int g0/0/1
[R2-GigabitEthernet0/0/1]ip add 13.0.0.1 24
[R2-GigabitEthernet0/0/1]undo shutdown
Info: Interface GigabitEthernet0/0/1 is not shutdown.
[R2-GigabitEthernet0/0/1]q
[R2]ip route-static 192.168.10.0 24 12.0.0.1
[R2]q
[R2]undo ip route-static 192.168.10.0 24 12.0.0.1
[R2]ip route-static 8.8.8.8 32 12.0.0.1
[R2]int loop 0
[R2-LoopBack0]ip add 114.114.114.114 32
[R2-LoopBack0]q
[R2]ip route-static 212.0.0.0 24 12.0.0.1
[R2]ip route-static 192.168.30.0 24 12.0.0.1
[R2]ip route-static 9.9.9.9 32 12.0.0.1