POJ 3737 UmBasketella

UmBasketella
Time Limit: 1000MS Memory Limit: 65536K
Total Submissions: 6248 Accepted: 2434

Description

In recent days, people always design new things with multifunction. For instance, you can not only use cell phone to call your friends, but you can also use your cell phone take photographs or listen to MP3. Another example is the combination between watch and television. These kinds of multifunction items can always improve people's daily life and are extremely favored by users.

The company Mr. Umbrella invented a new kind umbrella "UmBasketella" for people in Rainbow city recently and its idea also comes from such multifunction--the combination of umbrella and daily necessities. This kind of umbrella can be used as a basket and you can put something you want to carry in it. Since Rainbow city rains very often, such innovative usage is successful and "UmBasketella" sells very well. Unfortunately, the original "UmBasketella" do not have an automatic volume control technology so that it is easily damaged when users try to put too many things in it. To solve this problem, you are needed to design an "UmBasketella" with maximum volume. Suppose that "UmBasketella" is a cone-shape container and its surface area (include the bottom) is known, could you find the maximum value of the cone?

Input

Input contains several test cases. Eash case contains only one real number S, representing the surface area of the cone. It is guaranteed that 1≤S≤10000.

Output

For each test case, output should contain three lines.
The first line should have a real number representing the maximum volume of the cone. 
Output the height of the cone on the second line and the radius of the bottom area of the cone on the third line.
All real numbers should rounded to 0.01.

Sample Input

30

Sample Output

10.93
4.37

1.55

题意:

给出椎体的表面积,求最大体积和此时的高和底面半径。

题解:

第1道3分题,推出公式会发现是单峰曲线,裸的3分。

代码:

#include <iostream>
#include <cstdio>
#include <cstring>
#include <cmath>
#include <algorithm>
const double eps=10e-6;
const double pi=acos(-1.0);
using namespace std;
double s;
double cal(double r)
{
    double R = s/(pi*r)-r;
    double h = sqrt(R*R-r*r);
    return h*pi*r*r/3;
}
int main()
{
    double left,right,mid1,v,v1,v2,mid2,r,h;
    while(~scanf("%lf",&s))
    {
        left=0,right=s/pi;
        while(left+eps<right)
        {
            mid1=left+(right-left)/3;
            mid2=right-(right-left)/3;
            v1=cal(mid1);
            v2=cal(mid2);
            if(v1<v2)
            left=mid1;
            else
            right=mid2;
        }
        r=left;
        double R = s/(pi*r)-r;
        h=sqrt(R*R-r*r);
        v= h*pi*r*r/3;
        printf("%.2f\n%.2f\n%.2f\n",v,h,r);
    }
    return 0;
}



  • 0
    点赞
  • 1
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
自动控制节水灌溉技术的高低代表着农业现代化的发展状况,灌溉系统自动化水平较低是制约我国高效农业发展的主要原因。本文就此问题研究了单片机控制的滴灌节水灌溉系统,该系统可对不同土壤的湿度进行监控,并按照作物对土壤湿度的要求进行适时、适量灌水,其核心是单片机和PC机构成的控制部分,主要对土壤湿度与灌水量之间的关系、灌溉控制技术及设备系统的硬件、软件编程各个部分进行了深入的研究。 单片机控制部分采用上下位机的形式。下位机硬件部分选用AT89C51单片机为核心,主要由土壤湿度传感器,信号处理电路,显示电路,输出控制电路,故障报警电路等组成,软件选用汇编语言编程。上位机选用586型以上PC机,通过MAX232芯片实现同下位机的电平转换功能,上下位机之间通过串行通信方式进行数据的双向传输,软件选用VB高级编程语言以建立友好的人机界面。系统主要具有以下功能:可在PC机提供的人机对话界面上设置作物要求的土壤湿度相关参数;单片机可将土壤湿度传感器检测到的土壤湿度模拟量转换成数字量,显示于LED显示器上,同时单片机可采用串行通信方式将此湿度值传输到PC机上;PC机通过其内设程序计算出所需的灌水量和灌水时间,且显示于界面上,并将有关的灌水信息反馈给单片机,若需灌水,则单片机系统启动鸣音报警,发出灌水信号,并经放大驱动设备,开启电磁阀进行倒计时定时灌水,若不需灌水,即PC机上显示的灌水量和灌水时间均为0,系统不进行灌水。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值