- 博客(0)
- 资源 (2)
- 收藏
- 关注
VITA65 Standard
The OpenVPX System Specification was created to bring versatile system architecturalsolutions to the VPX market. Based on the extremely flexible VPX family of standards, theOpenVPX standard uses module mechanical, connectors, thermal, communications protocols,utility, and power definitions provided by specific VPX standards and then describes a seriesof standard profiles that define slots, backplanes, modules, and Standard DevelopmentChassis.
2014-02-09
VPX标准规范之一/ VITA46.0 Draft Standard
Abstract
This standard describes VITA 46.0 Advanced Module Format for VMEbus systems, an
evolutionary step forward for the provision of high-speed interconnects in harsh-environment
applications.
Foreword
VME has been the de-facto bus standard for Commercial off the Shelf ( COTS ) Circuit Card
Assemblies since the 1980’s. VME boards have proven to be remarkably capable of evolving to
support newer technologies with innovations such as VME Subsystem Bus, PCI Mezzanine
Cards (PMC’s) and VME320.
However, advances in technologies, appearing particularly in interconnects, have demonstrated
the need for an advance in system development. This advance needs to accommodate high speed
interconnect, particularly serial interconnects, and higher power delivery in concert with better
heat removal.
This draft standard addresses these needs in the context of IEEE 1101 form factor modules.
Other specifications may address alternate outlines, such as VITA-48 (Draft).
Because electronics miniaturization is driving the plug-in module I/O count, most system
interconnects will need:
Multi-gigabit differential technology
Core computing cluster switched fabrics
Serial RapidIO, PCI Express, Advanced Switching Interconnect
Sufficient ports to enable distributed switching or centralized switching
The plethora of high-speed interfaces available for tomorrow’s plug-in modules:
Network interfaces (Fibre Channel, 10 GbE XAUI, Infiniband…,)
Digital video (TMDS, PanelLink, OpenLDI…)
Mass storage interface (Fibre Channel, Serial ATA…,)
FPGA-based inter-board connections (e.g. Xilinx RocketIO)
Custom sensor interfaces
VITA 46 provides an evolutionary roadmap for VME users:
To leverage the broad spectrum of high-speed interconnect technologies
Backward compatibility with VME bus electrical, software and selected mechanicals
Enables heterogeneous architectures which preserve existing investments in COTS-based
systems
Addresses both 3U and 6U form factors with commonality
Harsh environment fit ‘designed-in’ up front in the standard
Rugged air or conduction-cooled form factors
High value placed on rear-panel I/O
High-speed connector survivability/compliance
2010-02-23
空空如也
TA创建的收藏夹 TA关注的收藏夹
TA关注的人