云服务器-异地部署集群服务-Kubernetes(K8S)-网络篇

最新推荐文章于 2024-07-28 16:50:44 发布

chen645800876

最新推荐文章于 2024-07-28 16:50:44 发布

阅读量5.2k

点赞数 4

文章标签： etcd kubernetes 云服务器

本文链接：https://blog.csdn.net/chen645800876/article/details/105279648

版权

重要!!!

注意： 本文使用二进制安装，过程非常繁琐，所以不推荐大家使用这种安装方式。请使用更简洁的kubeadm安装，具体请参考
云服务器-异地部署集群服务-Kubernetes(K8S)-Kubeadm安装方式-完整篇

一、环境

之前在腾讯云买了台学生机，后面又在阿里买了一台，主要是便宜，然后由于网络不好，又买了台境外的抢占式实例。后来部署k8s集群的时候发现，网卡上绑定的地址不是公网IP，而应用只能绑定网卡上的地址。但是私网IP之间又不通，这就和网上的教程有些出入了，一时有些懵逼，最后去看文档发现其实官方是支持这种方式部署的，只要改下配置就行了

1.1 `k8s`版本列表

软件	版本
`CentOS`	8.0
`Kubernetes`	v1.19.0-alpha.1
`Docker`	19.03.8
`Etcd`	v3.4.7
`Flannel`	v0.12.0

云服务商	主机名	公网ip/私网ip	组件	推荐配置
阿里云	master	47.241.67.61 172.21.221.58	kube-apiserver kube-controller-manager kube-scheduler etcd flannel docker	2C2G
阿里云	work02	39.100.145.150 172.26.95.163	kube-proxy kube-proxy docker flannel etcd	2C1G
腾讯云	work01	175.24.19.25 172.17.0.13	kube-proxy kube-proxy docker flannel etcd	1C2G

在这里插入图片描述

由于是个人练习使用，所以用的都是最新版的，部署方式是下载二进制部署。

部署过程中参考了很多人的教程

1.1 修改主机名

master

hostnamectl set-hostname master
work01

hostnamectl set-hostname work01
work02

hostnamectl set-hostname work02

最后重新登录或直接使用

1.2 修改hosts

master work01 work02都执行

cat  >> /etc/hosts <<EOF
47.241.67.61  master
175.24.19.25 work01
39.100.145.150 work02
EOF

1.3 关闭SElinux

修改/etc/selinux/config文件

# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
#     enforcing - SELinux security policy is enforced.
#     permissive - SELinux prints warnings instead of enforcing.
#     disabled - No SELinux policy is loaded.
SELINUX=disabled

1.4 关闭防火墙

由于云服务器默认已经关闭防火墙，这里就不再重复

二、`ETCD`集群部署

2.1 创建ETCD证书

对证书这块我还是有点不太清楚，反正按教程来，里面步骤讲的很详细

kubernetes1.13.1+etcd3.3.10+flanneld0.10集群部署

1）cfssl安装

wget https://pkg.cfssl.org/R1.2/cfssl_linux-amd64
wget https://pkg.cfssl.org/R1.2/cfssljson_linux-amd64
wget https://pkg.cfssl.org/R1.2/cfssl-certinfo_linux-amd64
chmod +x cfssl_linux-amd64 cfssljson_linux-amd64 cfssl-certinfo_linux-amd64
mv cfssl_linux-amd64 /usr/local/bin/cfssl
mv cfssljson_linux-amd64 /usr/local/bin/cfssljson
mv cfssl-certinfo_linux-amd64 /usr/local/bin/cfssl-certinfo

2）存放目录创建

mkdir /k8s/etcd/{bin,cfg,ssl} -p
mkdir /k8s/kubernetes/{bin,cfg,ssl} -p
cd /k8s/etcd/ssl/

3）ETCD CA配置

cat << EOF | tee ca-config.json
{
  "signing": {
    "default": {
      "expiry": "87600h"
    },
    "profiles": {
      "etcd": {
         "expiry": "87600h",
         "usages": [
            "signing",
            "key encipherment",
            "server auth",
            "client auth"
        ]
      }
    }
  }
}
EOF

4）ETCD CA证书

cat << EOF | tee ca-csr.json
{
    "CN": "etcd CA",
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "L": "Beijing",
            "ST": "Beijing"
        }
    ]
}
EOF

5）ETCD Server证书

不太懂，所以只能把所有的IP都放进去了，省得麻烦

cat << EOF | tee server-csr.json
{
    "CN": "etcd",
    "hosts": [
    "47.241.67.61",
    "39.100.145.150",
    "175.24.19.25",
    "172.21.221.58",
    "172.17.0.13",
    "172.26.95.163",
    "127.0.0.1"
    ],
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "L": "Beijing",
            "ST": "Beijing"
        }
    ]
}
EOF

6）生成ETCD CA证书和私钥

cfssl gencert -initca ca-csr.json | cfssljson -bare ca

7）生成ETCD Server证书

cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=etcd server-csr.json | cfssljson -bare server

8）将生成的证书分发到其它节点

2.2 `ETCD` 下载

1）下载

[root@master ~]# wget https://github.com/etcd-io/etcd/releases/download/v3.4.7/etcd-v3.4.7-linux-amd64.tar.gz

强烈建议买个境外的服务器，下载速度贼快

2）解压，复制到指定目录，可以自定义

[root@master ~]# tar -xvf etcd-v3.4.7-linux-amd64.tar.gz
[root@master ~]# cd etcd-v3.4.7-linux-amd64/
[root@master etcd-v3.4.7-linux-amd64]# cp etcd etcdctl /k8s/etcd/bin/

3）可执行文件发送到其它节点（先在各节点把目录创建好）

[root@master ~]# scp -r /k8s/etcd/bin/ root@work01:/k8s/etcd/bin/
[root@master ~]# scp -r /k8s/etcd/bin/ root@work02:/k8s/etcd/bin/

2.3 `ETCD` 配置（重点）

这里我使用ETCD给的公共发现服务，可以节省一点配置

1）获取private discovery URL

[root@master ~]# curl https://discovery.etcd.io/new?size=3
https://discovery.etcd.io/4636d0525ea552bb567fa3f8c59312f8

$ curl https://discovery.etcd.io/new?size=3
https://discovery.etcd.io/3e86b59982e49066c5d813af1c2e2579cbf573de

后面的size=3表示创建集群的初始大小为3

2）添加ETCD配置文件(三个节点都要做)

[root@master ~]# mkdir /data1/etcd
[root@master ~]# vim /k8s/etcd/cfg/etcd.conf

master配置


#[Member]
ETCD_NAME="etcd01"
ETCD_DATA_DIR="/data1/etcd"

ETCDCTL_API="2"
ETCD_ENABLE_V2="true"

ETCD_LISTEN_PEER_URLS="https://0.0.0.0:2380"
ETCD_LISTEN_CLIENT_URLS="https://0.0.0.0:2379"

#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://47.241.67.61:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://47.241.67.61:2379,https://127.0.0.1:2379"

#[discovery]
ETCD_DISCOVERY="https://discovery.etcd.io/4636d0525ea552bb567fa3f8c59312f8"

ETCD_CERT_FILE="/k8s/etcd/ssl/server.pem"
ETCD_KEY_FILE="/k8s/etcd/ssl/server-key.pem"
ETCD_TRUSTED_CA_FILE="/k8s/etcd/ssl/ca.pem"
ETCD_CLIENT_CERT_AUTH="true"
ETCD_PEER_CERT_FILE="/k8s/etcd/ssl/server.pem"
ETCD_PEER_KEY_FILE="/k8s/etcd/ssl/server-key.pem"
ETCD_PEER_TRUSTED_CA_FILE="/k8s/etcd/ssl/ca.pem"
ETCD_PEER_CLIENT_CERT_AUTH="true"

注意 ETCDCTL_API="2",ETCD_ENABLE_V2="true"这两条加上，因为flannel不支持API3，而新版ETCD貌似默认不启用API2，所以要在配置处打开

因为ETCD

work01配置

#[Member]
ETCD_NAME="etcd02"
ETCD_DATA_DIR="/data1/etcd"
ETCD_LISTEN_PEER_URLS="https://0.0.0.0:2380"
ETCD_LISTEN_CLIENT_URLS="https://0.0.0.0:2379"

ETCDCTL_API="2"
ETCD_ENABLE_V2="true"
 
#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://175.24.19.25:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://175.24.19.25:2379,https://127.0.0.1:2379"

#[discovery]
ETCD_DISCOVERY="https://discovery.etcd.io/4636d0525ea552bb567fa3f8c59312f8"

ETCD_CERT_FILE="/k8s/etcd/ssl/server.pem"
ETCD_KEY_FILE="/k8s/etcd/ssl/server-key.pem"
ETCD_TRUSTED_CA_FILE="/k8s/etcd/ssl/ca.pem"
ETCD_CLIENT_CERT_AUTH="true"
ETCD_PEER_CERT_FILE="/k8s/etcd/ssl/server.pem"
ETCD_PEER_KEY_FILE="/k8s/etcd/ssl/server-key.pem"
ETCD_PEER_TRUSTED_CA_FILE="/k8s/etcd/ssl/ca.pem"
ETCD_PEER_CLIENT_CERT_AUTH="true"

work02配置

#[Member]
ETCD_NAME="etcd03"
ETCD_DATA_DIR="/data1/etcd"
ETCD_LISTEN_PEER_URLS="https://0.0.0.0:2380"
ETCD_LISTEN_CLIENT_URLS="https://0.0.0.0:2379"

ETCDCTL_API="2"
ETCD_ENABLE_V2="true"
#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://39.100.145.150:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://39.100.145.150:2379,https://127.0.0.1:2379"

#[discovery]
ETCD_DISCOVERY="https://discovery.etcd.io/4636d0525ea552bb567fa3f8c59312f8"

#[Security]
ETCD_CERT_FILE="/k8s/etcd/ssl/server.pem"
ETCD_KEY_FILE="/k8s/etcd/ssl/server-key.pem"
ETCD_TRUSTED_CA_FILE="/k8s/etcd/ssl/ca.pem"
ETCD_CLIENT_CERT_AUTH="true"
ETCD_PEER_CERT_FILE="/k8s/etcd/ssl/server.pem"
ETCD_PEER_KEY_FILE="/k8s/etcd/ssl/server-key.pem"
ETCD_PEER_TRUSTED_CA_FILE="/k8s/etcd/ssl/ca.pem"
ETCD_PEER_CLIENT_CERT_AUTH="true"

3）设置系统控制启动（三个节点配置一样）

此处master,work01,work02配置相同

由于新版本直接从EnvironmentFile指定的文件中读取配置，所以也无需在向ExecStart中添加参数了

[root@master ~]# vim /usr/lib/systemd/system/etcd.service

[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target

[Service]
Type=notify
WorkingDirectory=/data1/etcd/
EnvironmentFile=-/k8s/etcd/cfg/etcd.conf
# set GOMAXPROCS to number of processors
ExecStart=/bin/bash -c "GOMAXPROCS=$(nproc) /k8s/etcd/bin/etcd"
Restart=on-failure
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

4）到控制台开放2379和2380端口**（重点）**

5）启动ETCD

需要三台同时打开，因为第一次打开时要建立集群信息，时间长了会超时

systemctl daemon-reload
systemctl enable etcd
systemctl start etcd

6）查看集群状态

[root@master ~]# /k8s/etcd/bin/etcdctl --ca-file=/k8s/etcd/ssl/ca.pem --cert-file=/k8s/etcd/ssl/server.pem --key-file=/k8s/etcd/ssl/server-key.pem --endpoints="https://47.241.67.61:2379,https://175.24.19.25:2379,https://39.100.145.150:2379" cluster-health
member 55fbdb6e3ad20da8 is healthy: got healthy result from https://127.0.0.1:2379
member bdadcd6be126f0f2 is healthy: got healthy result from https://127.0.0.1:2379
member ca87f0191f2c8efa is healthy: got healthy result from https://127.0.0.1:2379
cluster is healthy

显示cluster is healthy即可

三、部署`Flannel`

3.1 下载安装

1）下载文件

[root@master ~]# wget https://github.com/coreos/flannel/releases/download/v0.12.0/flannel-v0.12.0-linux-amd64.tar.gz

2）解压并将文件移动到指定位置(其它节点也需要)

[root@master ~]# tar -zxvf flannel-v0.12.0-linux-amd64.tar.gz
[root@master ~]# mkdir -p /k8s/flannel/{bin,cfg}
[root@master ~]# mv flanneld mk-docker-opts.sh /k8s/flannel/bin/

3）添加flanneld配置

[root@master ~]# vim /k8s/flannel/cfg/flannel.conf

master配置

#[flannel config]
FLANNELD_PUBLIC_IP="47.241.67.61"
FLANNELD_IFACE="eth0"

#[etcd]
FLANNELD_ETCD_ENDPOINTS="https://47.241.67.61:2379,https://175.24.19.25:2379,https://39.100.145.150:2379"
FLANNELD_ETCD_KEYFILE="/k8s/etcd/ssl/server-key.pem"
FLANNELD_ETCD_CERTFILE="/k8s/etcd/ssl/server.pem"
FLANNELD_ETCD_CAFILE="/k8s/etcd/ssl/ca.pem"
FLANNELD_IP_MASQ=true

其中下面两行重点（官方支持的，FLANNELD_PUBLIC_IP填公网，FLANNELD_IFACE直接填私网网卡名，或者私网IP）

FLANNELD_PUBLIC_IP="47.241.67.61"
FLANNELD_IFACE="eth0"

work01配置

#[flannel config]
FLANNELD_PUBLIC_IP="175.24.19.25"
FLANNELD_IFACE="eth0"

#[etcd]
FLANNELD_ETCD_ENDPOINTS="https://47.241.67.61:2379,https://175.24.19.25:2379,https://39.100.145.150:2379"
FLANNELD_ETCD_KEYFILE="/k8s/etcd/ssl/server-key.pem"
FLANNELD_ETCD_CERTFILE="/k8s/etcd/ssl/server.pem"
FLANNELD_ETCD_CAFILE="/k8s/etcd/ssl/ca.pem"
FLANNELD_IP_MASQ=true

work02配置

#[flannel config]
FLANNELD_PUBLIC_IP="39.100.145.150"
FLANNELD_IFACE="eth0"

#[etcd]
FLANNELD_ETCD_ENDPOINTS="https://47.241.67.61:2379,https://175.24.19.25:2379,https://39.100.145.150:2379"
FLANNELD_ETCD_KEYFILE="/k8s/etcd/ssl/server-key.pem"
FLANNELD_ETCD_CERTFILE="/k8s/etcd/ssl/server.pem"
FLANNELD_ETCD_CAFILE="/k8s/etcd/ssl/ca.pem"
FLANNELD_IP_MASQ=true

3.3 添加到系统启动

三个节点都一样，可以直接复制

[root@master ~]# vim /usr/lib/systemd/system/flanneld.service

#/k8s/flannel/cfg/flannel.conf
[Unit]
Description=Flanneld overlay address etc agent
After=network-online.target network.target
#Before=docker.service


[Service]
Type=notify
EnvironmentFile=-/k8s/flannel/cfg/flannel.conf
ExecStart=/bin/bash -c "GOMAXPROCS=$(nproc) /k8s/flannel/bin/flanneld"
ExecStartPost=/k8s/flannel/bin/mk-docker-opts.sh -k DOCKER_NETWORK_OPTIONS -d /run/flannel/subnet.env


Restart=on-failure


[Install]
WantedBy=multi-user.target

同样，由于，新版本的flannel也支持直接读取环境变量导入的配置，所以无需再后面添加参数

注意设置先于docker启动的参数已经注释了，后面再修改，此处只是为了尽快打通flannel网络方便测试

3.4 开放`8472`端口（重点）

使用了vxlan，默认走的是8472，UDP端口。

一定要到控制台打开端口，我之前就卡这了

3.5 向ETCD集群中添加网络配置

[root@master ~]# /k8s/etcd/bin/etcdctl --ca-file=/k8s/etcd/ssl/ca.pem --cert-file=/k8s/etcd/ssl/server.pem --key-file=/k8s/etcd/ssl/server-key.pem --endpoints="https://47.241.67.61:2379,https://175.24.19.25:2379,https://39.100.145.150:2379" set  /coreos.com/network/config '{"Network":"10.254.0.0/16","Backend":{"Type":"vxlan"}}'

3.6 启动`flannel`

[root@master ~]# systemctl daemon-reload
[root@master ~]# systemctl start flanneld

3.7 验证

flannel启动之后，使用ifconfig就可以看到新建的网卡名了

master

[root@master ~]# ifconfig

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 172.21.221.58  netmask 255.255.240.0  broadcast 172.21.223.255
        inet6 fe80::216:3eff:fe02:c141  prefixlen 64  scopeid 0x20<link>
        ether 00:16:3e:02:c1:41  txqueuelen 1000  (Ethernet)
        RX packets 17773699  bytes 3481620865 (3.2 GiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 18485980  bytes 3378770561 (3.1 GiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

flannel.1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1450
        inet 10.254.5.0  netmask 255.255.255.255  broadcast 0.0.0.0
        inet6 fe80::e416:57ff:fe05:4590  prefixlen 64  scopeid 0x20<link>
        ether e6:16:57:05:45:90  txqueuelen 0  (Ethernet)
        RX packets 184  bytes 20342 (19.8 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 271  bytes 21777 (21.2 KiB)
        TX errors 0  dropped 76 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 5551843  bytes 1164398442 (1.0 GiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 5551843  bytes 1164398442 (1.0 GiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

work01

[root@work01 ~]# ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 172.17.0.13  netmask 255.255.240.0  broadcast 172.17.15.255
        inet6 fe80::5054:ff:fe74:1c2c  prefixlen 64  scopeid 0x20<link>
        ether 52:54:00:74:1c:2c  txqueuelen 1000  (Ethernet)
        RX packets 11260582  bytes 1955580984 (1.8 GiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 10765978  bytes 1595473013 (1.4 GiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

flannel.1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1450
        inet 10.254.20.0  netmask 255.255.255.255  broadcast 0.0.0.0
        inet6 fe80::ecad:57ff:febf:9ca6  prefixlen 64  scopeid 0x20<link>
        ether ee:ad:57:bf:9c:a6  txqueuelen 0  (Ethernet)
        RX packets 177  bytes 13893 (13.5 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 216  bytes 23030 (22.4 KiB)
        TX errors 0  dropped 8 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 34578  bytes 1838675 (1.7 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 34578  bytes 1838675 (1.7 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

确认8472 UDP端口开放后

直接ping一下其它节点的flannel网关即可

[root@master ~]# ping 10.254.20.0
PING 10.254.20.0 (10.254.20.0) 56(84) bytes of data.
64 bytes from 10.254.20.0: icmp_seq=1 ttl=64 time=68.2 ms
64 bytes from 10.254.20.0: icmp_seq=2 ttl=64 time=68.1 ms
64 bytes from 10.254.20.0: icmp_seq=3 ttl=64 time=68.1 ms

3.8 安装`docker`

1）安装

部署flannel后，稍加配置，docker 间即可相互访问了

装docker很简单，这里直接用阿里的镜像仓库提供的安装步骤来

具体见https://developer.aliyun.com/mirror/docker-ce?spm=a2c6h.13651102.0.0.69bb1b11v9sJ7l

# step 1: 安装必要的一些系统工具
sudo yum install -y yum-utils device-mapper-persistent-data lvm2
# Step 2: 添加软件源信息
sudo yum-config-manager --add-repo https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
# Step 3: 更新并安装Docker-CE
sudo yum makecache fast
sudo yum -y install docker-ce

如果出现CentOS 8.0 安装docker 报错：Problem: package docker-ce_xxx_64 requires containerd.io >= 1.2.2-3

请参考这篇文章https://www.backendcloud.cn/，安装或更新 containerd.io版本即可

2）修改flannel配置

vim /usr/lib/systemd/system/flanneld.service

取消之前注释的这行

Before=docker.service

#/k8s/flannel/cfg
[Unit]
Description=Flanneld overlay address etc agent
After=network-online.target network.target
Before=docker.service


[Service]
Type=notify
EnvironmentFile=-/k8s/flannel/cfg/flannel.conf
ExecStart=/bin/bash -c "GOMAXPROCS=$(nproc) /k8s/flannel/bin/flanneld"
ExecStartPost=/k8s/flannel/bin/mk-docker-opts.sh -k DOCKER_NETWORK_OPTIONS -d /run/flannel/subnet.env


Restart=on-failure


[Install]
WantedBy=multi-user.target

3）修改docker配置

修改两行

# 导入flannel网络配置
EnvironmentFile=-/run/flannel/subnet.env
# 添加$DOCKER_NETWORK_OPTIONS参数
ExecStart=/bin/bash -c "GOMAXPROCS=$(nproc) /usr/bin/dockerd  -H fd:// --containerd=/run/containerd/containerd.sock $DOCKER_NETWORK_OPTIONS"

[Unit]
Description=Docker Application Container Engine
Documentation=https://docs.docker.com
BindsTo=containerd.service
After=network-online.target firewalld.service containerd.service
Wants=network-online.target
Requires=docker.socket

[Service]
Type=notify
# the default is not to use systemd for cgroups because the delegate issues still
# exists and systemd currently does not support the cgroup feature set required
# for containers run by docker

# 导入flannel网络配置
EnvironmentFile=-/run/flannel/subnet.env
# 添加$DOCKER_NETWORK_OPTIONS参数
ExecStart=/bin/bash -c "GOMAXPROCS=$(nproc) /usr/bin/dockerd  -H fd:// --containerd=/run/containerd/containerd.sock $DOCKER_NETWORK_OPTIONS"

ExecReload=/bin/kill -s HUP $MAINPID
TimeoutSec=0
RestartSec=2
Restart=always

# Note that StartLimit* options were moved from "Service" to "Unit" in systemd 229.
# Both the old, and new location are accepted by systemd 229 and up, so using the old location
# to make them work for either version of systemd.
StartLimitBurst=3

# Note that StartLimitInterval was renamed to StartLimitIntervalSec in systemd 230.
# Both the old, and new name are accepted by systemd 230 and up, so using the old name to make
# this option work for either version of systemd.
StartLimitInterval=60s

# Having non-zero Limit*s causes performance problems due to accounting overhead
# in the kernel. We recommend using cgroups to do container-local accounting.
LimitNOFILE=infinity
LimitNPROC=infinity
LimitCORE=infinity

# Comment TasksMax if your systemd version does not support it.
# Only systemd 226 and above support this option.
TasksMax=infinity

# set delegate yes so that systemd does not reset the cgroups of docker containers
Delegate=yes

# kill only the docker process, not all processes in the cgroup
KillMode=process

[Install]
WantedBy=multi-user.target

重启docker，输入ifconfig，可以看到网段已经生效，docker也可以相互ping`通了

docker0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet 10.254.5.1  netmask 255.255.255.0  broadcast 10.254.5.255
        inet6 fe80::42:d6ff:fe13:a5b4  prefixlen 64  scopeid 0x20<link>
        ether 02:42:d6:13:a5:b4  txqueuelen 0  (Ethernet)
        RX packets 5  bytes 308 (308.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 32  bytes 2436 (2.3 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

至此，网络配置已经完成，不能ping通的，先检查，ETCD使用的是2379和2380，TCP协议端口，flannel如果使用的是vxlan，默认是使用8472，UDP协议端口，请在控制台打开。

chen645800876

关注

4
点赞
踩
16

收藏

觉得还不错? 一键收藏
打赏
4
评论
云服务器-异地部署集群服务-Kubernetes(K8S)-网络篇

一、环境之前在腾讯云买了台学生机，后面又在阿里买了一台，主要是便宜，然后由于网络不好，又买了台境外的抢占式实例。后来部署k8s集群的时候发现，网卡上绑定的地址不是公网IP，而应用只能绑定网卡上的地址。但是私网IP之间又不通，这就和网上的教程有些出入了，一时有些懵逼，最后去看文档发现其实官方是支持这种方式部署的，只要改下配置就行了1.1 k8s版本列表软件版本CentOS...
复制链接

扫一扫