How to Draining a Pressure Vessel

pressure vessels Coalescing filter. Wet gas tank. Dry. It must be drained.

This seems like a simple task, is not it? It should not be easy. After all, how will the drain tank to take any ideas or skills, especially under pressure? However, I have been amazed at I often got a phone call to solve this problem traced to a faulty chemical storage tanks sewage system. Poor drainage system design involving compressed air automatic sprinkler system. Obviously, water is harmful, just spend a lot of money to repair and re-work.

Air system flooded the result is what we call death drowning. This is a metaphor, folks.

Here are a few things you can do to improve the drainage system.

First, you should be inclined tube is used to dry the dishes. Otherwise, the liquid metal corrosion of pipes or frozen positions. Step 1/4 "to the foot oil has a good guide.

Second, make sure drain vents. Otherwise, you might accidentally press the construction of drainage systems and geysers everywhere. Comedian some, but not safe or production. It may even damage the pipe.

Free float drains third person missing. No if, when. Here's the secret: a small plastic material, sold at the bottom of the gas-water separator "automatic drain valve," which is not worth the $ 20 payment. Get a direct action automatic permanent drain.

Fourth, do not try to save the deer, try to merge some of the vessels leak cars. It is a cheap trick aviation system over the years absorbed. I can not emphasize this point. Add automatic drainage culverts in all points. If you want to merge multiple ship sank, you will end up fluid in the past boats. This is because the pressure inside the container is slightly lower than the other. Even if the two pressure PSIG pressure drop nearly 5 feet of water. Bottom with a quick glance.

转载于:https://my.oschina.net/u/1183778/blog/147317