monit监控工具（客户端）

1、安装Monit

Redhat、CentOS可以到：http://pkgs.repoforge.org/monit/ 下载对应位数rpm包安装。 

Debian可以直接：apt-get install monit 安装。

官网下载最新版：http://mmonit.com/download/

 

源码编译安装：

相关依赖： yum install pam-devel

 

tar zxvf monit-5.7.tar.gz

cd monit-5.7

./configure --prefix=/usr/local/monit --sysconfdir=/usr/local/monit/etc

make

make install

mkdir -p /usr/local/monit/etc

cp monitrc /usr/local/monit/etc

chmod 600 /usr/local/monit/etc/monitrc

2、修改配置文件

CentOS用RPM包安装的话配置文件在： /etc/monit.conf；

Debian apt-get安装的话配置文件在：/etc/monit/monitrc；

源码编译在安装目录 /etc/monit.conf

下面是一个简单的例子，配置文件中已经包含了大量的例子，可以看配置文件参考。

 

set daemon 120 #设置检测时间

set logfile /var/log/monit.log #monit日志

set httpd port 2812 and # monit内置了一个用于查看被监视服务

use address 192.168.10.197 # 设置这个http服务器的地址或注释使用所有本机IP

allow 192.168.10.0/24 # 允许本地访问

allow admin:monit # 设置使用用户名admin和密码monit

set mailserver smtp.12320.tv port 25 USERNAME "zsxlmonitor" PASSWORD "123456" #(设置发送邮件的服务器及邮箱)

#制定报警邮件的格式

set mail-format {

from: zsxlmonitor@12320.tv

subject: [From Monit]$SERVICE $EVENT at $DATE

message:Date:$DATE

ServerHost: $HOST

Item:$SERVICE

Problem: $DESCRIPTION.

Action:$ACTION

}

#指定邮件接收者

set alert zsxlmonitor@12320.tv with reminder on 3 cycles #每3个周期发送一次警告

或者

set alert zsxlmonitor@12320.tv #每个错误都发送警告邮件

##################### 监控实例 #####################

#检测sshd服务

check process sshd with pidfile /var/run/sshd.pid

start program "/etc/init.d/sshd start"

stop program "/etc/init.d/sshd stop"

if failed port 22 protocol ssh then restart

if 5 restarts within 5 cycles then timeout

 

#检测mysql服务

check process mysql with pidfile /usr/local/mysql/var/vpser.pid

group database

start program = "/etc/init.d/mysql start"

stop program = "/etc/init.d/mysql stop"

if failed host 127.0.0.1 port 3306 then restart

if 5 restarts within 5 cycles then timeout

 

#检测nginx服务

check process nginx with pidfile /usr/local/nginx/logs/nginx.pid

start program = "/etc/init.d/nginx start"

stop program = "/etc/init.d/nginx stop"

if failed host localhost port 80 protocol http

then restart

 

自定义脚本：

if failed host localhost port 80 protocol http then exec “/usr/bin/restart.sh”

 

配置中的pid及启动、关闭脚本的路径一定要是全路径，且参数一定要正确否则会造成无法正常检测或正常启动。

如果添加了http可以直接使用http://192.168.10.197:2812 进行管理。

 

可以看到监控服务的运行状态：

3、启动/停止Monit

/usr/local/monit/bin/monit 启动

/usr/local/monit/bin/monit quit 关闭

 

Optional action arguments for non-daemon mode are as follows:

start all           - Start all services

start name          - Only start the named service

stop all            - Stop all services

stop name           - Only stop the named service

restart all         - Stop and start all services

restart name        - Only restart the named service

monitor all         - Enable monitoring of all services

monitor name        - Only enable monitoring of the named service

unmonitor all       - Disable monitoring of all services

unmonitor name      - Only disable monitoring of the named service

reload              - Reinitialize monit

status              - Print full status information for each service

summary             - Print short status information for each service

quit                - Kill monit daemon process

validate            - Check all services and start if not running

procmatch <pattern> - Test process matching pattern

 

4、参数配置语法

 

4.1 监控模块

         监控性能[运行中的程序，需指定PID]

CHECK PROCESS <unique name> <PIDFILE <path> | MATCHING <regex>>

监控文件

CHECK FILE <unique name> PATH <path>

 

CHECK FIFO <unique name> PATH <path>

监控文件系统

CHECK FILESYSTEM <unique name> PATH <path>

监控目录

CHECK DIRECTORY <unique name> PATH <path>

监控主机

CHECK HOST <unique name> ADDRESS <host address>

监控系统

CHECK SYSTEM <unique name>

监控程序

CHECK PROGRAM <unique name> PATH <executable file> [TIMEOUT <number> SECONDS]

 

4.2 动作[action]

ALERT               执行报警动作

RESTART           执行重启[根据定义的start program和stop program，先执行stop，然后start]

START                执行启动[直接执行定义的start program]

STOP                  执行关闭[直接执行定义的stop program]

EXEC                  执行脚本[直接执行 “ ” 内指定脚本(全路径)]

UNMONITOR   停止监控

 

4.3 资源项目[RESOURCE]

--PROCESS

CPU([user|system|wait])                  CPU明细

CPU                                                         CPU使用率<%>

TOTALCPU                                             CPU使用率【含子进程】<%>

SWAP                                                       交换分区使用< Byte, kB, MB, GB >

CHILDREN                                             子进程

MEMORY                                                        内存使用< Byte, kB, MB, GB >

TOTALMEMORY                                   内存使用【含子进程】< Byte, kB, MB, GB >

LOADAVG([1min|5min|15min])       系统负载

UPTIME                                                  运行时间< "SECONDS", "MINUTES", "HOURS", or "DAYS" >

 

--FILE

SIZE                                                         大小< "B","KB","MB","GB" >

Permission                                             权限

UID

GID

PID

PPID

TIMESTAMP                                          时间戳< "SECONDS", "MINUTES", "HOURS", or "DAYS" >

 

-- SYSTEMFILE

usage                                                      已使用

SPACE                                                      距离项存在[值]

INODE                                                     inode值<个/%>

 

--HOST

host []                                                     主机[IP、域名]

port []                                                      端口[值]

type []                                                     传输协议[TCP|UDP|TCPSSL]

protocol []                                              服务协议[APACHE-STATUS DNS DWP FTP GPS HTTP IMAP CLAMAV LDAP2 LDAP3 LMTP MEMCACHE MYSQL NNTP NTP3 POP POSTFIX-POLICY RADIUS RDATE RSYNC SIP SMTP SSH TNS PGSQL]

The HTTP protocol supports in addition:

         REQUEST

         HOSTHEADER

         CHECKSUM

 

The Apache-status protocol supports in addition:

         logging (loglimit)

         closing connections (closelimit)

         performing DNS lookups (dnslimit)

         in keepalive with a client (keepalivelimit)

         replying to a client (replylimit)

         receiving a request (requestlimit)

         initialising (startlimit)

         waiting for incoming connections (waitlimit)

         gracefully closing down (gracefullimit)

         performing cleanup procedures (cleanuplimit)

 

-- PROGRAM

status                                                     程序执行状态

 

4.4 判断测量[TEST]

FAILED [RESOURCE] 项的值为错误

CHANGED [RESOURCE] 项存在变化

EXIST [项] 存在[项]

DOES NOT EXIST 不存在[项]

 

4.4 比较语法

"<", ">", "!=", "=="

"gt", "lt", "eq", "ne"

"greater", "less", "equal", "notequal" then 值

 

4.5 监测时间

 

EVERY [number] CYCLES

every 2 cycles #每2个周期监测一次

 

EVERY [cron]

every "* * * * *" 分 时 日 月 周，*所有 x-y表示X至y，“，”指定某个点

every "* 8-19 * * 1-5" #每周1至5，每天早上8点至晚上7点内，按周期间隔监测

 

NOT EVERY [cron] 用法与VERY [cron]相反

 

5、实例语法

 

1．系统性能

 

#监控系统性能，定义监控名称myhost

check system myhost

 

#如果1分钟内系统负载大于4，则执行报警

if loadavg (1min) > 4 then alert

 

#如果5分钟内系统负载大于2，则执行报警

if loadavg (5min) > 2 then alert

 

#如果总内存使用率高于75%，则执行报警

if memory usage > 75% then alert

 

#如果交换空间使用率大于25%，则执行报警

if swap usage > 25% then alert

 

#如果CPU(user)使用率高于70%，则执行报警

if cpu usage (user) > 70% then alert

 

#如果CPU(system)使用率高于30%，则执行报警

if cpu usage (system) > 30% then alert

 

#如果CPU(wait)使用率高于20%，则执行报警

if cpu usage (wait) > 20% then alert

 

2．硬盘监控

 

#监控文件系统：/dev/sdb1，定义监控名称为datafs

check filesystem datafs with path /dev/sdb1

 

#挂载、卸载文件系统，注意开启这个功能。

#start program  = "/bin/mount /data"

#stop program  = "/bin/umount /data"

 

#检测文件系统的权限不为660时，则停止监控

if failed permission 660 then unmonitor

 

#检测文件系统的UID不为root时，则停止监控

if failed uid root then unmonitor

 

#检测文件系统的GID不为disk时，则停止监控

if failed gid disk then unmonitor

 

#检测文件系统的空间使用率超过80%，则执行报警

if space usage > 80% for 5 times within 15 cycles then alert

 

#检测文件系统的空间使用率超过90%，则执行卸载文件系统

#if space usage > 99% then stop

 

#检测文件系统的inode使用数超过30000，则执行报警

if inode usage > 30000 then alert

 

#检测文件系统的inode使用率超过99%，则执行卸载文件系统

if inode usage > 99% then stop

 

3．文件监控

#监控文件：/data/mydatabase.db，定义监控名称为database

check file database with path /data/mydatabase.db

 

#检测文件系统的权限不为700时，则停止监控

if failed permission 700 then alert

 

#检测文件的UID不为data时，则执行报警

if failed uid data then alert

#检测文件的GID不为data时，则执行报警

if failed gid data then alert

 

#检测文件的时间戳大于15分钟时，则执行报警

if timestamp > 15 minutes then alert

 

#检测文件的大小如果大于100M，则执行脚本

if size > 100 MB then exec "/my/cleanup/script" as uid dba and gid dba

 

4．目录监控

#监控目录：/bin，定义监控名称为bin

check directory bin with path /bin

 

#如果目录权限不为755，则停止监控

#    if failed permission 755 then unmonitor

#如果目录的UID不为0，则停止监控

#    if failed uid 0 then unmonitor

#如果目录的GID不为0，则停止监控

#    if failed gid 0 then unmonitor

 

5．进程监控

 

#监控进程，指定进程的pid文件：/usr/local/apache/logs/httpd.pid，定义监控名称为Apache

 

check process Apache with pidfile /usr/local/apache/logs/httpd.pid

start program = "/usr/local/apache/bin/httpd -k start"

stop program  = "/usr/local/apache/bin/httpd -k stop"

 

#检测进程的CPU占用率高于60%时，则执行报警

if cpu > 60% for 5 cycles then alert

 

#检测进程的CPU占用率高于80%时，则执行重启

if cpu > 80% for 10 cycles then restart

 

#检测进程的总内存占用高于200MB时，则执行重启

#    if totalmem > 200.0 MB for 5 cycles then restart

 

#检测进程的子进程数高于200个，则执行报警

if children > 200 for 3 times within 5 cycles then alert

 

#检测进程的子进程数高于500个，则执行重启

if children > 500 for 5 times within 15 cycles then restart

 

#检测进程5分钟内的平均负载大于10时，则执行停止

#if loadavg(5min) greater than 10 for 8 cycles then stop

 

#检测127.0.0.1的80端口如果超时[5s]、错误，则执行重启

if failed host 127.0.0.1 port 80 protocol http for 5 times within 10 cycles then restart

 

#检测访问http://127.0.0.1/check.php，如果返回内容不是”OK”，则执行报警

if failed url http://127.0.0.1/check.php

and content == 'ok'

then alert

 

#检测访问127.0.0.1:80//somefile.html如果错误，则执行重启

if failed host 127.0.0.1 port 80 protocol http and request "/somefile.html" then restart

 

#检测指定主机，发送请求，判断返回值，执行指令

if failed host 127.0.0.1 port 80

send "GET / HTTP/1.0\r\nHost: 127.0.0.1\r\n\r\n"

expect "HTTP/[0-9\.]{3} 200 OK"

then alert

 

#检测apache-status判断值，执行指令

if failed host 127.0.0.1 port 80 protocol apache-status

                loglimit > 10% or

                dnslimit > 50% or

                waitlimit < 20%

 then alert

 

#if failed port 443 type tcpssl protocol http with timeout 15 seconds then restart

 

#如果在5个周期内重启3次进程，则判断为超时

#if 3 restarts within 5 cycles then timeout

 

#depends on apache_bin

#group server

 

6．监控主机

check host myserver with address 192.168.1.1

if failed icmp type echo count 3 with timeout 3 seconds then alert

if failed port 3306 protocol mysql with timeout 15 seconds then alert

if failed url http://user:password@www.foo.bar:8080/?querystring and content == 'action="j_security_check"' then alert

转载于:https://my.oschina.net/u/615494/blog/283910