linux编程学习--利用vim代码补全YouCompleteMe

首先系统是Ubuntu16.04系统

1、ubuntu16.04系统是自带vim，如有需要下载vim

 sudo apt-get install vim-gtk

确定你的vim是支持python

在python3前面有加号亲测可以！！！

2、按照YouCompleteMe的git说明要安装cmake和python-dev

1 sudo apt-get install build-essential cmake
2 sudo apt-get install python-dev python3-dev

3、安装vim的拓展管理器Vundle

git clone https://github.com/gmarik/Vundle.vim.git ~/.vim/bundle/Vundle.vim

安装完成后再安装地方建立文件.vimrc作为Vundle的配置文件

set nocompatible              " be iMproved, required
filetype off                  " required

" set the runtime path to include Vundle and initialize
set rtp+=~/.vim/bundle/Vundle.vim
call vundle#begin()
" alternatively, pass a path where Vundle should install plugins
"call vundle#begin(‘~/some/path/here‘)

" let Vundle manage Vundle, required
Plugin ‘VundleVim/Vundle.vim‘

" The following are examples of different formats supported.
" Keep Plugin commands between vundle#begin/end.

" All of your Plugins must be added before the following line
call vundle#end()            " required
filetype plugin indent on    " required
" To ignore plugin indent changes, instead use:
"filetype plugin on

再begin和end之间加各种插件配置，这里我们要补全代码的插件YouCompleteMe

在两个之间加上Plugin  ‘Valloric/YouCompleteMe‘

不过这里建议先自己下载后再加上

4、建议在~/.vim/bundle/上下载YouCompleteMe

1 git clone https://github.com/gmarik/vundle.git ~/.vim/bundle/vundle  
2 git clone https://github.com/Valloric/YouCompleteMe.git ~/.vim/bundle/YouCompleteMe  
3 cd ~/.vim/bundle/YouCompleteMe  
4 git submodule update --init --recursive  

5、在下载完后选择要支持的语言这里支持C系列语言

1 cd ~/.vim/bundle/YouCompleteMe
2 ./install.py --clang-completer

其他的语言根据git说明设置

使用系统设置的c

./install.py --clang-completer --system-libclang

6、配置YCM

完成后对YCM中还要进行配置要使用的库路径什么的

~/.vim/bundle/YouCompleteMe/third_party/ycmd/cpp/ycm/下的.ycm_extra_conf.py中的flags进行加入

1 ‘-isystem‘,
2 ‘/usr/include‘,
3 ‘-isystem‘,
4 ‘usr/include/c++/5.4.0‘
5 ‘-isystem‘,
6 ‘usr/include/x86_64-linux-gnu/c++‘,

注释掉

1 try:
2      final_flags.remove( ‘-stdlib-libc++‘ )
3 except ValueError:
4      pass

然后再前面自己建立的.vimrc中加入

1 let g:ycm_global_ycm_extra_conf = ‘~/.vim/bundle/YouCompleteMe/third_party/ycmd/cpp/ycm/.ycm_extra_conf.py’       "配置全局路径
2 let g:ycm_confirm_extra_conf=0   "每次直接加载该文件，不提示是否要加载

完成！！！