Foscam IP Camera

The foscam platform allows you to watch the live stream of your Foscam IP camera in Home Assistant.

To enable your Foscam IP camera in your installation, add the following to your configuration.yaml file:

Foscam平台允许您在Home Assistant中观看Foscam IP摄像机的直播。

要启用Foscam IP摄像机，请将以下内容添加到您的configuration.yaml文件中：

# Example configuration.yaml entry
camera:
  - platform: foscam
    ip: IP_ADDRESS
    username: USERNAME
    password: PASSWORD

Configuration variables:

• ip (Required): The IP address your camera.
• port (Optional): The port that the camera is running on. The default is 88.
• username (Required): The username for accessing your camera.
• password (Required): The password for accessing your camera.
• name (Optional): This parameter allows you to override the name of your camera.

配置变量：
     ip（必需）：您的相机的IP地址。
     port（可选）：摄像机正在运行的端口。 默认值为88。
     username（必需）：访问摄像机的用户名。
     password（必需）：访问摄像机的密码。
     name（可选）：此参数允许您覆盖相机的名称。

Note:

There seems to be some issues within Foscam with lengthy passwords and passwords containing certain symbols. Be sure to check your camera’s documentation.

Control Foscam PTZ (Pan/Tilt/Zoom) - Home/Away

Foscam Webcams which support CGI Commands can be controlled by Home Assistant (Source). For an example of how this can be done, see the Foscam IP Camera Pan, Tilt, Zoom Control Cookbook entry.

注意：

在Foscam中似乎有一些问题，长密码和密码包含某些符号。 请务必检查相机的文档。

控制Foscam PTZ（Pan / Tilt / Zoom） - 在家/不在家

支持CGI命令的Foscam网络摄像头可以由Home Assistant（来源）控制。 有关如何完成此操作的示例，请参阅Foscam IP Camera Pan，Tilt，Zoom Control Cookbook条目。

 

 

转载于:https://my.oschina.net/u/3379895/blog/1057662