5.2. Application Layer Protocols with Embedded Network Information

5.2. Application Layer Protocols with Embedded Network Information

Network address translation is beautifully invisible when it works, but has adverse effects on some protocols. Some network applications, e.g., FTP, SNMP, H323, LDAP, IRC, make use of embedded IP information in the application layer protocol or data stream. Since the 2.0.x kernel series (which is not covered here), linux has supported modules which inspect and manipulate packet contents on particular types of packets when used with NAT or masquerading.

FTP is the classic example. Within the FTP control channel (usually established to destination port tcp/21) the client and the server exchange IP address and port information. If the network address translation device doesn't manipulate this data, the FTP server will not be able to contact the client to provide the data.

Passive mode FTP provides the possibility for a network layer which requires only outbound TCP connections. This results in a more NAT friendly and firewall friendly protocol, because the connections are initiated from the client.

Not only are there network applications which break when NAT is involved but also network layer protocols. IPSec is a standards-based network-layer security protocol commonly used in VPNs and IPv6 networks. There are many different ways to use IPSec, but, when used in AH (Authentication Header) mode, NAT will break IPSec functionality.

This underscores the importance of determining if NAT is the best solution for the problem. There are kernel modules to help handle many (though not all) of the application layer protocol when using NAT, but some protocols, such as IPSec in AH mode simply cannot be used with NAT.