ubi 的相关概念和解释

最新推荐文章于 2023-12-07 16:42:49 发布

chiyikou1762

最新推荐文章于 2023-12-07 16:42:49 发布

阅读量472

点赞数

原文链接：https://my.oschina.net/jingxia/blog/697480

版权

设备和卷

设备是抽象在 MTD 上的概念，MTD 分区上首先需要格式化为 UBI 设备

uboot CMD： ubi part

卷是 UBI 设备上的概念， ubi 设备上可以创建多个卷

uboot CMD： ubi create

对于 mkfs.ubifs 做成的镜像是 ubi 格式的。

需要使用 ubi write 或者 nand write.ubifs 烧写，具体没有测试

ubinize 可以将 ubi 格式的镜像转换为普通 nand write 可以烧写的 raw 镜像

注意有 PMECC 的情况需要去掉因为 ubinize 插值的 0xFF 。使用

nand write.trimffs 烧写。

U-Boot> set mtdids nand0=atmel_nand
U-Boot> set mtdparts mtdparts=atmel_nand:8M(Bootstrap),125M(system),-(userdata)
U-Boot> mtdparts

device nand0 <atmel_nand>, # parts = 3
#: name                size            offset          mask_flags
0: Bootstrap           0x00800000      0x00000000      0
1: system              0x07d00000      0x00800000      0
2: userdata            0x07b00000      0x08500000      0

active partition: nand0,0 - (Bootstrap) 0x00800000 @ 0x00000000

defaults:
mtdids : none
mtdparts: none
U-Boot> nand
nand - NAND sub-system

Usage:
nand info - show available NAND devices
nand device [dev] - show or set current device
nand read - addr off|partition size
nand write - addr off|partition size
    read/write 'size' bytes starting at offset 'off'
    to/from memory address 'addr', skipping bad blocks.
nand read.raw - addr off|partition [count]
nand write.raw - addr off|partition [count]
    Use read.raw/write.raw to avoid ECC and access the flash as-is.
nand write.trimffs - addr off|partition size
    write 'size' bytes starting at offset 'off' from memory address
    'addr', skipping bad blocks and dropping any pages at the end
    of eraseblocks that contain only 0xFF
nand erase[.spread] [clean] off size - erase 'size' bytes from offset 'off'
    With '.spread', erase enough for given file size, otherwise,
    'size' includes skipped bad blocks.
nand erase.part [clean] partition - erase entire mtd partition'
nand erase.chip [clean] - erase entire chip'
nand bad - show bad blocks
nand dump[.oob] off - dump page
nand scrub [-y] off size | scrub.part partition | scrub.chip
    really clean NAND erasing bad blocks (UNSAFE)
nand markbad off [...] - mark bad block(s) at offset (UNSAFE)
nand biterr off - make a bit error at offset (UNSAFE)
U-Boot> ubi part system
Creating 1 MTD partitions on "nand0":
0x000000800000-0x000008500000 : "mtd=1"
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    126976 bytes
UBI: smallest flash I/O unit:    2048
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
UBI: attached mtd1 to ubi0
UBI: MTD device name:            "mtd=1"
UBI: MTD device size:            125 MiB
UBI: number of good PEBs:        1000
UBI: number of bad PEBs:         0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     1
UBI: available PEBs:             123
UBI: total number of reserved PEBs: 877
UBI: number of PEBs reserved for bad PEB handling: 10
UBI: max/mean erase counter: 1/0
U-Boot> ubifsmount system
UBIFS: mounted UBI device 0, volume 0, name "system"
UBIFS: mounted read-only
UBIFS: file system size:   108183552 bytes (105648 KiB, 103 MiB, 852 LEBs)
UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
UBIFS: media format:       w4/r0 (latest is w4/r0)
UBIFS: default compressor: LZO
UBIFS: reserved for root: 0 bytes (0 KiB)
U-Boot> ubi
ubi ubifsmount ubifsumount ubifsls ubifsload
U-Boot> ubifsls
<DIR>        3872 Tue Aug 06 03:36:31 2013 app
<DIR>       11856 Tue Aug 06 03:30:01 2013 bin
<DIR>        1752 Tue Aug 06 03:39:21 2013 etc
<DIR>       12840 Tue Aug 06 03:39:20 2013 lib
<DIR>         496 Tue Aug 06 03:03:59 2013 usr
<DIR>        2296 Tue Aug 06 03:28:49 2013 xbin
<DIR>        2048 Tue Aug 06 03:33:58 2013 framework
            26340 Tue Aug 06 02:56:11 2013 initlogo.rle
            19044 Tue Aug 06 02:56:11 2013 initlogo_pda.rle
<DIR>        2096 Tue Aug 06 03:18:02 2013 fonts
             1352 Tue Aug 06 02:40:59 2013 build.prop
<DIR>         224 Tue Aug 06 03:27:29 2013 vendor
U-Boot>

附件是申波给的示例

使用分区也可以成功：

done
Bytes transferred = 113377280 (6c20000 hex)
U-Boot> nand
nand - NAND sub-system

NAND write: device 0 offset 0x800000, size 0x6c20000
113377280 bytes written: OK
U-Boot> ubi part system
Creating 1 MTD partitions on "nand0":
0x000000800000-0x000008500000 : "mtd=1"
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    126976 bytes
UBI: smallest flash I/O unit:    2048
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
UBI: attached mtd1 to ubi0
UBI: MTD device name:            "mtd=1"
UBI: MTD device size:            125 MiB
UBI: number of good PEBs:        1000
UBI: number of bad PEBs:         0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     1
UBI: available PEBs:             123
UBI: total number of reserved PEBs: 877
UBI: number of PEBs reserved for bad PEB handling: 10
UBI: max/mean erase counter: 1/0
U-Boot> ubifsmount system
UBIFS: mounted UBI device 0, volume 0, name "system"
UBIFS: mounted read-only
UBIFS: file system size:   108183552 bytes (105648 KiB, 103 MiB, 852 LEBs)
UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
UBIFS: media format:       w4/r0 (latest is w4/r0)
UBIFS: default compressor: LZO
UBIFS: reserved for root: 0 bytes (0 KiB)