MyTCP<三>

数据的接收是一个被动的过程，TCP与IP的接收接口在tcp_protocol中进行定义。

static const struct net_protocol tcp_protocol = {
.handler = tcp_v4_rcv,
.err_handler =tcp_v4_err,
.gso_send_check = tcp_v4_gso_send_check,
.gso_segment =tcp_tso_segment,
.gro_receive =tcp4_gro_receive,
.gro_complete =tcp4_gro_complete,
.no_policy = 1,
.netns_ok = 1,
};

在定义了tcp_protocol对象之后，需要向内核进行注册之后，便可以使用，相关的操作在af_inet.c中完成。如下所示：

static int __init inet_init(void)
{
struct sk_buff *dummy_skb;
struct inet_protosw *q;
struct list_head *r;
int rc = -EINVAL;


BUILD_BUG_ON(sizeof(struct inet_skb_parm) > sizeof(dummy_skb->cb));


rc = proto_register(&tcp_prot, 1);
if (rc)
goto out;


rc = proto_register(&udp_prot, 1);
if (rc)
goto out_unregister_tcp_proto;


rc = proto_register(&raw_prot, 1);
if (rc)
goto out_unregister_udp_proto;
/*
* Tell SOCKET that we are alive...
*/
(void)sock_register(&inet_family_ops);
#ifdef CONFIG_SYSCTL
ip_static_sysctl_init();
#endif
/*
* Add all the base protocols.
*/
if (inet_add_protocol(&icmp_protocol, IPPROTO_ICMP) < 0)
printk(KERN_CRIT "inet_init: Cannot add ICMP protocol\n");
if (inet_add_protocol(&udp_protocol, IPPROTO_UDP) < 0)
printk(KERN_CRIT "inet_init: Cannot add UDP protocol\n");
if (inet_add_protocol(&tcp_protocol, IPPROTO_TCP) < 0)
printk(KERN_CRIT "inet_init: Cannot add TCP protocol\n");
#ifdef CONFIG_IP_MULTICAST
if (inet_add_protocol(&igmp_protocol, IPPROTO_IGMP) < 0)
printk(KERN_CRIT "inet_init: Cannot add IGMP protocol\n");
#endif
/* Register the socket-side information for inet_create. */
for (r = &inetsw[0]; r < &inetsw[SOCK_MAX]; ++r)
INIT_LIST_HEAD(r);
for (q = inetsw_array; q < &inetsw_array[INETSW_ARRAY_LEN]; ++q)
inet_register_protosw(q);
/*
* Set the ARP module up
*/
arp_init();
/*
* Set the IP module up
*/
ip_init();
tcp_v4_init();
/* Setup TCP slab cache for open requests. */
tcp_init();
/* Setup UDP memory threshold */
udp_init();
/* Add UDP-Lite (RFC 3828) */
udplite4_register();
/*
* Set the ICMP layer up
*/
if (icmp_init() < 0)
panic("Failed to create the ICMP control socket.\n");
/*
* Initialise the multicast router
*/
#if defined(CONFIG_IP_MROUTE)
if (ip_mr_init())
printk(KERN_CRIT "inet_init: Cannot init ipv4 mroute\n");
#endif
/*
* Initialise per-cpu ipv4 mibs
*/
if (init_ipv4_mibs())
printk(KERN_CRIT "inet_init: Cannot init ipv4 mibs\n");
ipv4_proc_init();
ipfrag_init();
dev_add_pack(&ip_packet_type);
rc = 0;
out:
return rc;
out_unregister_udp_proto:
proto_unregister(&udp_prot);
out_unregister_tcp_proto:
proto_unregister(&tcp_prot);
goto out;
}