仿真毕设分享 单片机电机控制系统仿真设计-单片机设计

此仿真是基于单片机直流电机控制系统，使用了用L298驱动直流电机，并用按键控制电机正转、反转、加速、减速、停止、启动等功能，并用LCD作为电机状态显示，实现了基于L298N对电机PWM调速(示波器可观察PWM调速过程)。PWM调
速对LED进行灯光调节。

​

    #include 
    #include 
    #define uchar	unsigned char
    #define uint	unsigned int
    #define lcd	P0      /* lcd定义 */
    #define KEY	P3      /*按键定义 */
    void LCD_Writecmd( uchar cmd );


    void LCD_Writedata( uchar dat );
    
    void LCD_write_char( uchar x, uchar y, char ch );
    
    void LCD_write_str( uchar x, uchar y, char str[] );
    
    void LCD_Init( void );
    
    void LCD_clear();
    
    void delay_us( uchar n );
    
    void delay_ms( uchar m );


    sbit	RW	= P2 ^ 1;
    sbit	RS	= P2 ^ 0;
    sbit	EN	= P2 ^ 2;
    sbit	pwm1	= P1 ^ 0;
    sbit	pwm2	= P1 ^ 1;
    sbit	pwm	= P1 ^ 3;
    
    sbit	ZHENG	= P1 ^ 4;
    sbit	FAN	= P1 ^ 5;
    sbit	TIAO	= P1 ^ 6;
    void timer_init();

    uchar a = 50, b = 0, c = 0, flag = 0, flag1 = 0;
    
    void main()
    {
    	LCD_Init();
    	timer_init();
    	LCD_write_str( 0, 0, "State:" );
    	while ( 1 )
    	{
    		b	= a / 10 + 0x30;
    		c	= a % 10 + 0x30;
    		if ( KEY == 0xfe )
    		{

项目获取:

https://gitee.com/feifei1122/simulation-project