Linux iptables 端口转发


准备:
1, UDP端口范围映射
2, tcp 端口范围映射
3, 本机端口转发
4, 单个端口转发


打开转发

[root@CentOS ~]# cat /etc/sysctl.conf  | grep net.ipv4.ip_forward
net.ipv4.ip_forward = 1

 

清空规则,修改默认策略,重要数据请备份


[root@CentOS ~]# iptables -F -t nat
[root@CentOS ~]# iptables -X -t nat
[root@CentOS ~]# iptables -P INPUT DROP
[root@CentOS ~]# iptables -L -t nat
Chain PREROUTING (policy ACCEPT)
target     prot opt source               destination         
 
Chain POSTROUTING (policy ACCEPT)
target     prot opt source               destination         
 
Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination         
[root@CentOS ~]# 
 
删除reject
[root@CentOS ~]# vim /etc/sysconfig/iptables
[root@CentOS ~]# service iptables restart

 

1, UDP端口范围映射


一一匹配:
[root@CentOS ~]# iptables -t nat -A PREROUTING -p udp --dport 5000:6000 -j DNAT --to 192.168.66.2:5000-6000
 
 
【注意】这样写,将导致不可预测的端口转发匹配:
[root@CentOS ~]# iptables -t nat -A PREROUTING -p udp --dport 5000:5010 -j DNAT --to 192.168.66.2:6000-6010
 
 
 
 
【nat内机器:192.168.66.2】端口转发匹配验证,输出源端口是9999
[root@CentOS ~]# tcpdump -i eth0 -tnn  port 9999
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes
IP 172.16.20.245.9999 > 192.168.66.2.5500: UDP, length 1
IP 172.16.20.245.9999 > 192.168.66.2.5500: UDP, length 1
IP 172.16.20.245.9999 > 192.168.66.2.5501: UDP, length 1
IP 172.16.20.245.9999 > 192.168.66.2.5501: UDP, length 1
 
 
 
 
【nat外机器:172.16.20.245】发送给nat机器,发出的数据包源端口是9999, 目的端口是5500-5555
sudo nc -v -u -p 9999 172.16.20.183 5500-5555
 
 
端口转发双向通信验证:
 
nat里面的机器打开监听:
[root@CentOS ~]# nc -l -u 5555
 
 
nat外面的机器向nat 发送数据
nc -u 172.16.20.183 5555
 
 
互发数据,双方是可以收到的。
 
可以发现:端口映射完全匹配,双通互发数据成功!

 

2, tcp 端口范围映射


tcp 端口范围映射:
[root@CentOS ~]# iptables -t nat -A PREROUTING -p tcp --dport 2000:2500 -j DNAT --to 192.168.66.2:2000-2500
 
 
验证:
接收端:【nat内机器:192.168.66.2】
[root@CentOS ~]# tcpdump -i eth0 -tnn  portrange 2000-2500
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes
IP 172.16.20.245.37446 > 192.168.66.2.2000: Flags [S], seq 1083771445, win 29200, options [mss 1460,sackOK,TS val 3864340 ecr 0,nop,wscale 7], length 0
IP 192.168.66.2.2000 > 172.16.20.245.37446: Flags [R.], seq 0, ack 1083771446, win 0, length 0
IP 172.16.20.245.47912 > 192.168.66.2.2001: Flags [S], seq 629593170, win 29200, options [mss 1460,sackOK,TS val 3864344 ecr 0,nop,wscale 7], length 0
IP 192.168.66.2.2001 > 172.16.20.245.47912: Flags [R.], seq 0, ack 629593171, win 0, length 0
IP 172.16.20.245.34816 > 192.168.66.2.2002: Flags [S], seq 680276410, win 29200, options [mss 1460,sackOK,TS val 3864345 ecr 0,nop,wscale 7], length 0
IP 192.168.66.2.2002 > 172.16.20.245.34816: Flags [R.], seq 0, ack 680276411, win 0, length 0
IP 172.16.20.245.37508 > 192.168.66.2.2003: Flags [S], seq 1070666075, win 29200, options [mss 1460,sackOK,TS val 3864345 ecr 0,nop,wscale 7], length 0
IP 192.168.66.2.2003 > 172.16.20.245.37508: Flags [R.], seq 0, ack 1070666076, win 0, length 0
 
 
 
发送端:【nat外机器:172.16.20.245】发送给nat机器:
sudo nc -z -w1 -v  172.16.20.183 2000-2500
nc: connect to 172.16.20.183 port 2000 (tcp) failed: Connection refused
nc: connect to 172.16.20.183 port 2001 (tcp) failed: Connection refused
nc: connect to 172.16.20.183 port 2002 (tcp) failed: Connection refused
nc: connect to 172.16.20.183 port 2003 (tcp) failed: Connection refused
nc: connect to 172.16.20.183 port 2004 (tcp) failed: Connection refused
nc: connect to 172.16.20.183 port 2005 (tcp) failed: Connection refused
nc: connect to 172.16.20.183 port 2006 (tcp) failed: Connection refused
nc: connect to 172.16.20.183 port 2007 (tcp) failed: Connection refused
 
 
可以看见,虽然连接失败,但是发送的seq和ack回应包都有了,就差握手成功了。

 

3, 本机端口转发


[root@CentOS ~]# iptables -t nat -A PREROUTING -p tcp --dport 1234 -j REDIRECT --to-ports 2345
[root@CentOS ~]# nc -l -k 2345  #开启监听
 
1,
局域网其他主机直接来访问本机2345端口:看看tcpdump输出
chunli@ubuntu~$ nc 172.16.20.183 2345 #远程机访问本机172.16.20.183 2345
 
本机tcpdump输出
[root@CentOS ~]# tcpdump -i eth0 host 172.16.20.245 -tnn
IP 172.16.20.245.44706 > 172.16.20.183.2345: Flags [S], seq 33366406, win 29200, options [mss 1460,sackOK,TS val 4001328 ecr 0,nop,wscale 7], length 0
IP 172.16.20.183.2345 > 172.16.20.245.44706: Flags [R.], seq 0, ack 33366407, win 0, length 0
 
 
 
2,局域网其他主机直接来访问本机1234端口:看看tcpdump输出
chunli@ubuntu~$ nc 172.16.20.183 1234 #远程机访问本机172.16.20.183 1234
 
tcpdump在本机看一下:
[root@CentOS ~]# tcpdump -i eth0 host 172.16.20.245 -tnn
IP 172.16.20.245.47332 > 172.16.20.183.1234: Flags [S], seq 3622624416, win 29200, options [mss 1460,sackOK,TS val 4047126 ecr 0,nop,wscale 7], length 0
IP 172.16.20.183.1234 > 172.16.20.245.47332: Flags [S.], seq 123535638, ack 3622624417, win 14480, options [mss 1460,sackOK,TS val 12018501 ecr 4047126,nop,wscale 6], length 0
IP 172.16.20.245.47332 > 172.16.20.183.1234: Flags [.], ack 1, win 229, options [nop,nop,TS val 4047126 ecr 12018501], length 0
IP 172.16.20.245.47332 > 172.16.20.183.1234: Flags [P.], seq 1:2, ack 1, win 229, options [nop,nop,TS val 4047282 ecr 12018501], length 1
IP 172.16.20.183.1234 > 172.16.20.245.47332: Flags [.], ack 2, win 227, options [nop,nop,TS val 12019122 ecr 4047282], length 0
IP 172.16.20.245.47332 > 172.16.20.183.1234: Flags [P.], seq 2:3, ack 1, win 229, options [nop,nop,TS val 4047325 ecr 12019122], length 1
IP 172.16.20.183.1234 > 172.16.20.245.47332: Flags [.], ack 3, win 227, options [nop,nop,TS val 12019297 ecr 4047325], length 0
IP 172.16.20.245.47332 > 172.16.20.183.1234: Flags [P.], seq 3:4, ack 1, win 229, options [nop,nop,TS val 4047353 ecr 12019297], length 1
 
可以看到三次握手成功!

 

4, 单个端口转发

端口转发 tcp模式:将访问本机1122端口数据包转发给192.168.66.2:5566
iptables -t nat -A PREROUTING -p tcp  --dport 1122 -j DNAT --to-destination 192.168.66.2:5566
 
端口转发 udp模式:将访问本机2233端口数据包转发给192.168.66.2:4455
iptables -t nat -A PREROUTING -p udp  --dport 2233 -j DNAT --to-destination 192.168.66.2:4455

 

转载于:https://my.oschina.net/u/3776585/blog/1616606

评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值