U-Boot-PetaLinux> Cㄕ浇?014.07 (Feb 26 2016 - 01:11:03)
DRAM: ECC disabled 1 GiB
MMC: zynq_sdhci: 0
SF: Detected S25FL128S_64K with page size 256 Bytes, erase size 64 KiB, total 16 MiB
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: zynq_gem emio is 1.
Gem.e000b000
U-BOOT for lan
@@DP83640_config.
Gem.e000b000 Waiting for PHY auto negotiation to complete.... done
zynq_gem phydev->speed is 100.
BOOTP broadcast 1
DHCP client bound to address 192.168.182.175
Hit any key to stop autoboot: 0
Device: zynq_sdhci
Manufacturer ID: 2
OEM: 544d
Name: SA04G
Tran Speed: 50000000
Rd Block Len: 512
SD version 3.0
High Capacity: Yes
Capacity: 3.7 GiB
Bus Width: 4-bit
reading image.ub
9227940 bytes read in 804 ms (10.9 MiB/s)
## Loading kernel from FIT Image at 01000000 ...
Using 'conf@1' configuration
Trying 'kernel@1' kernel subimage
Description: PetaLinux Kernel
Type: Kernel Image
Compression: gzip compressed
Data Start: 0x010000f0
Data Size: 9212539 Bytes = 8.8 MiB
Architecture: ARM
OS: Linux
Load Address: 0x00008000
Entry Point: 0x00008000
Hash algo: crc32
Hash value: d6d0aaa9
Verifying Hash Integrity ... crc32+ OK
## Loading fdt from FIT Image at 01000000 ...
Using 'conf@1' configuration
Trying 'fdt@1' fdt subimage
Description: Flattened Device Tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x018c9450
Data Size: 14102 Bytes = 13.8 KiB
Architecture: ARM
Hash algo: crc32
Hash value: 1873a14c
Verifying Hash Integrity ... crc32+ OK
Booting using the fdt blob at 0x18c9450
Uncompressing Kernel Image ... OK
Loading Device Tree to 07ff9000, end 07fff715 ... OK
Starting kernel ...
Booting Linux on physical CPU 0x0
Linux version 3.17.0-xilinx (root@localhost.localdomain) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #10 SMP PREEMPT Fri Feb 26 01:12:25 PST 2016
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: lan
cma: