使用spring-data-redis执行redis命令

首先pom.xml文件，添加以下包：

<dependency>
      <groupId>org.springframework.data</groupId>
      <artifactId>spring-data-redis</artifactId>
      <version>1.8.4.RELEASE</version>
</dependency>

在RedisClustersConfiguration.java配置中添加以下代码：

@Configuration
@PropertySource(value = "classpath:config.properties")
public class RedisClustersConfiguration {

    @Value("${redis.pool.maxTotal}")
    private int maxTotal;//最大连接数
    @Value("${redis.pool.maxIdle}")
    private int maxIdle;//最大空闲时间
    @Value("${redis.pool.numTestsPerEvictionRun}")
    private int numTestsPerEvictionRun;//每次最大连接数
    @Value("${redis.pool.timeBetweenEvictionRunsMillis}")
    private int timeBetweenEvictionRunsMillis;//释放扫描的扫描间隔
    @Value("${redis.pool.minEvictableIdleTimeMillis}")
    private int minEvictableIdleTimeMillis;//连接的最小空闲时间
    @Value("${redis.pool.softMinEvictableIdleTimeMillis}")
    private int softMinEvictableIdleTimeMillis;//连接控歘按时间多久后释放，当空闲时间>该值且空闲连接>最大空闲连接数时直接释放
    @Value("${redis.pool.maxWaitMillis}")
    private int maxWaitMillis;//获得链接时的最大等待毫秒数，小于0：阻塞不确定时间，默认-1
    @Value("${redis.pool.testOnBorrow}")
    private boolean testOnBorrow;//在获得链接的时候检查有效性，默认false
    @Value("${redis.pool.testWhileIdle}")
    private boolean testWhileIdle;//在空闲时检查有效性，默认false
    @Value("${redis.pool.blockWhenExhausted}")
    private boolean blockWhenExhausted;//false报异常，true阻塞超时 默认：true

    @Value("${redis.cluster.connectionTimeout}")
    private int connectionTimeout;
    @Value("${redis.cluster.soTimeout}")
    private int soTimeout;
    @Value("${redis.cluster.maxRedirects}")
    private int maxRedirects;
    @Value("${redis.cluster.nodes}")
    private String redisNodes;
    @Value("${redis.cluster.password}")
    private String password;

    /**
     * 
     * @return
     */
    @Bean(name = "poolConfig")
    @Profile({ "prod", "dev", "test" })
    public JedisPoolConfig jedisPoolConfig() {
        JedisPoolConfig bean = new JedisPoolConfig();
        bean.setMaxTotal(maxTotal);
        bean.setMaxIdle(maxIdle);
        bean.setNumTestsPerEvictionRun(numTestsPerEvictionRun);
        bean.setTimeBetweenEvictionRunsMillis(timeBetweenEvictionRunsMillis);
        bean.setMinEvictableIdleTimeMillis(minEvictableIdleTimeMillis);
        bean.setSoftMinEvictableIdleTimeMillis(softMinEvictableIdleTimeMillis);
        bean.setMaxWaitMillis(maxWaitMillis);
        bean.setTestOnBorrow(testOnBorrow);
        bean.setTestWhileIdle(testWhileIdle);
        bean.setBlockWhenExhausted(blockWhenExhausted);
        return bean;
    }

    private Set<RedisNode> getRedisNodes() {
        Set<RedisNode> jedisClusterNodes = new HashSet<RedisNode>();
        //解析集群配置
        String[] clusterNodes = redisNodes.split(";");
        for (String clusterNode : clusterNodes) {
            String[] node = clusterNode.split(":");
            String host = node[0];
            int port = Integer.parseInt(node[1]);
            jedisClusterNodes.add(new RedisNode(host, port));
        }
        return jedisClusterNodes;
    }

    /**
     * 
     * @return
     */
    @Bean(name = "clusterConfig")
    @Profile({ "prod", "dev", "test" })
    public RedisClusterConfiguration redisClusterConfiguration() {
        RedisClusterConfiguration bean = new RedisClusterConfiguration();
        bean.setMaxRedirects(maxRedirects);
        bean.setClusterNodes(getRedisNodes());
        return bean;
    }

    /**
     * 
     * @param clusterConfig
     * @param poolConfig
     * @return
     */
    @Bean(name = "jedisConnectionFactory")
    public JedisConnectionFactory jedisConnectionFactory(RedisClusterConfiguration clusterConfig,
                                                         JedisPoolConfig poolConfig) {
        JedisConnectionFactory bean = new JedisConnectionFactory(clusterConfig, poolConfig);
        bean.setPassword(password);
        return bean;
    }

    /**
     * 
     * @return
     */
    @Bean(name = "stringRedisSerializer")
    public StringRedisSerializer stringRedisSerializer() {
        return new StringRedisSerializer();
    }

    /**
     * 
     * @param jedisConnectionFactory
     * @param stringRedisSerializer
     * @return
     */
    @SuppressWarnings({ "rawtypes", "unchecked" })
    @Bean(name = "redisTemplateTransactional")
    public RedisTemplate redisTemplateTransactional(JedisConnectionFactory jedisConnectionFactory,
                                                    StringRedisSerializer stringRedisSerializer) {
        RedisTemplate bean = new RedisTemplate();
        bean.setConnectionFactory(jedisConnectionFactory);
        bean.setDefaultSerializer(stringRedisSerializer);
        bean.setEnableTransactionSupport(true);
        return bean;
    }

    /**
     * 
     * @param jedisConnectionFactory
     * @param stringRedisSerializer
     * @return
     */
    @SuppressWarnings({ "rawtypes", "unchecked" })
    @Bean(name = "redisTemplate")
    public RedisTemplate redisTemplate(JedisConnectionFactory jedisConnectionFactory,
                                       StringRedisSerializer stringRedisSerializer) {
        RedisTemplate bean = new RedisTemplate();
        bean.setConnectionFactory(jedisConnectionFactory);
        bean.setDefaultSerializer(stringRedisSerializer);
        bean.setEnableTransactionSupport(false);
        return bean;
    }
}

config.properties配置文件参考如下：

redis.pool.maxTotal=30
redis.pool.maxIdle=10
redis.pool.numTestsPerEvictionRun=1024
redis.pool.timeBetweenEvictionRunsMillis=30000
redis.pool.minEvictableIdleTimeMillis=1800000
redis.pool.softMinEvictableIdleTimeMillis=10000
redis.pool.maxWaitMillis=1500
redis.pool.testOnBorrow=true
redis.pool.testWhileIdle=true
redis.pool.blockWhenExhausted=false

redis.cluster.connectionTimeout=60000
redis.cluster.soTimeout=300000
redis.cluster.maxRedirects=8
redis.cluster.nodes=172.23.25.142:6379;172.23.25.142:6380;172.23.25.142:6381;172.23.25.142:6382;172.23.25.143:6379;172.23.25.143:6380;172.23.25.143:6381;172.23.25.143:6382;172.23.25.144:6379;172.23.25.144:6380;172.23.25.144:6381;172.23.25.144:6382
redis.cluster.password=

Service代码实现如下：

@Service
public class RedisTemplateServiceImpl implements RedisTemplateService{

    /*
     * redis集群使用事务时，会报MUTLI is currently not supported in cluster mode.
     * Redis cluster对多key操作有限，要求命令中所有的key都属于一个slot，才可以被执行。
     * 客户端可以对multi-key命令进行拆分，再发给redis。 目前还未找到比较好的解决方法，
     * 所以在出现该错误的地方都用了非事务的redisTemplate。由于multi等命令不支持集群，
     * 所以弃用，使用redis的lua脚本来完成事务，脚本功能被设计成可以与集群功能保持兼容。
     * 但是脚本无法保证操作多key的原子性。
     */
    @Autowired
    private RedisTemplate<String, String> redisTemplateTransactional;
    @Autowired
    private RedisTemplate<String, String> redisTemplate;

    @Override
    public boolean hexists(final String key) {
        return redisTemplate.execute(new RedisCallback<Boolean>() {
            @Override
            public Boolean doInRedis(RedisConnection connection) throws DataAccessException {
                return connection.exists(key.getBytes());
            }
        });
    }
    
    @Override
    public void del(String key) {
        redisTemplate.delete(key);
    }

    @Override
    public Long hincrby(String key, String hashkey, long value) {
        return redisTemplate.opsForHash().increment(key, hashkey, value);
    }

    @Override
    public void hset(String key, String hashkey, Object value) {
        redisTemplate.opsForHash().put(key, hashkey, value);
    }
    
    @Override
    public void hmset(String key, Map<? extends Object, ? extends Object> map) {
        redisTemplate.opsForHash().putAll(key, map);
    }
    
    @Override
    public String hget(String key, String hashkey) {
        return (String) redisTemplate.opsForHash().get(key, hashkey);
    }

    @Override
    public Long lpush(String key, String value) {
        return redisTemplate.opsForList().leftPush(key, value);
    }

    @Override
    public String rpop(String key) {
        return redisTemplate.opsForList().rightPop(key);
    }
}

 

转载于:https://my.oschina.net/u/1445585/blog/1489132