power4 SMS配置网卡百兆全双工模式
使用nim服务器向客户端推装系统时,网络能够ping通,但数据包传输速度非常慢
查看发现客户端网卡自动协商后使用了半双工模式,实际应该使用百兆全双工
进入SMS设置对应网卡全双工模式
1.1 串口线启动系统
Service Processor Firmware
Version: 3R080425
Copyright 2001, IBM Corporation
109AFFA
________________________________
MAIN MENU
1. Service Processor Setup Menu
2. System Power Control Menu
3. System Information Menu
4. Language Selection Menu
5. Call-In/Call-Out Setup Menu
6. Set System Name
99. Exit from Menus
0> 2
SYSTEM POWER CONTROL MENU
1. Enable/Disable Unattended Start Mode:
Currently Disabled
2. Ring Indicate Power-On Menu
3. Reboot/Restart Policy Setup Menu
4. Power-On System
5. Power-Off System
6. Enable/Disable Fast System Boot:
Currently Fast Boot
7. Boot Mode Menu
98. Return to Previous Menu
99. Exit from Menus
0> 4
WARNING: POWERING SYSTEM WILL EXIT MENUS!
Enter "Y" to continue, any other key to abort.
0> y
Please wait....
SYSTEM POWER CONTROL MENU
1. Enable/Disable Unattended Start Mode:
Currently Disabled
2. Ring Indicate Power-On Menu
3. Reboot/Restart Policy Setup Menu
4. Power-On System
5. Power-Off System
6. Enable/Disable Fast System Boot:
Currently Fast Boot
7. Boot Mode Menu
98. Return to Previous Menu
99. Exit from Menus
Please wait....
System Powering On. Exiting menus.
9022
9101
90FD
9102
9103
9104
9105
9119
9106
9107
9200
9400
9108
9250
9251
9202
9400
9109
9301
9302
9400
910A
910B
910C
96C3
96C4
910D
96C2
910E
96C6
910F
9501
950B
9506
911D
9110
9111
9112
9113
96C7
96E1
96E2
9114
911E
9115
9116
911F
9117
*** FCode LP9802 PCI_Bus (lpfc) Version 1.33a1 ***
1.2 按数字1 进入SMS
1 = SMS Menu 5 = Default Boot List
6 = Stored Boot List 8 = Open Firmware Prompt
memory keyboard network scsi speaker
pSeries Firmware
Version RG080425_d79e22_regatta
SMS 1.3 (c) Copyright IBM Corp. 2000,2003 All rights reserved.
-------------------------------------------------------------------------------
Main Menu
1. Select Language
2. Change Password Options
3. View Error Log
4. Setup Remote IPL (Initial Program Load)
5. Change SCSI Settings
6. Select Console
7. Select Boot Options
-------------------------------------------------------------------------------
Navigation Keys:
X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:4
1.3 选择要修改的网卡
pSeries Firmware
Version RG080425_d79e22_regatta
SMS 1.3 (c) Copyright IBM Corp. 2000,2003 All rights reserved.
-------------------------------------------------------------------------------
NIC Adapters
Device Slot Hardware Address
1. 10/100 Mbps Ethernet PCI Adapt Integ:U0.1-P1/E2 0002554f6254
2. 10/100 Mbps Ethernet PCI Adapt 1:U0.1-P2-I1/E1 0002556f7044
3. 10/100 Mbps Ethernet PCI Adapt Integ:U0.1-P1/E1 0002554f6255
-------------------------------------------------------------------------------
Navigation keys:
M = return to Main Menu
ESC key = return to previous screen X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:3
pSeries Firmware
Version RG080425_d79e22_regatta
SMS 1.3 (c) Copyright IBM Corp. 2000,2003 All rights reserved.
-------------------------------------------------------------------------------
Network Parameters
10/100 Mbps Ethernet PCI Adapter II: U0.1-P1/E1
1. IP Parameters
2. Adapter Configuration
3. Ping Test
-------------------------------------------------------------------------------
Navigation keys:
M = return to Main Menu
ESC key = return to previous screen X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:2
pSeries Firmware
Version RG080425_d79e22_regatta
SMS 1.3 (c) Copyright IBM Corp. 2000,2003 All rights reserved.
-------------------------------------------------------------------------------
Adapter Configuration
10/100 Mbps Ethernet PCI Adapter II: U0.1-P1/E1
1. Speed,Duplex
2. Spanning Tree Enabled
3. Protocol
-------------------------------------------------------------------------------
Navigation keys:
M = return to Main Menu
ESC key = return to previous screen X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:1
pSeries Firmware
Version RG080425_d79e22_regatta
SMS 1.3 (c) Copyright IBM Corp. 2000,2003 All rights reserved.
-------------------------------------------------------------------------------
Speed,Duplex
10/100 Mbps Ethernet PCI Adapter II: U0.1-P1/E1
1. auto,auto ( rj45 ) <===
2. 10,half ( rj45 )
3. 10,full ( rj45 )
4. 100,half ( rj45 )
5. 100,full ( rj45 )
-------------------------------------------------------------------------------
Navigation keys:
M = return to Main Menu
ESC key = return to previous screen X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:5
pSeries Firmware
Version RG080425_d79e22_regatta
SMS 1.3 (c) Copyright IBM Corp. 2000,2003 All rights reserved.
-------------------------------------------------------------------------------
Speed,Duplex
10/100 Mbps Ethernet PCI Adapter II: U0.1-P1/E1
1. auto,auto ( rj45 )
2. 10,half ( rj45 )
3. 10,full ( rj45 )
4. 100,half ( rj45 )
5. 100,full ( rj45 ) <===
-------------------------------------------------------------------------------
Navigation keys:
M = return to Main Menu
ESC key = return to previous screen X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:
pSeries Firmware
Version RG080425_d79e22_regatta
SMS 1.3 (c) Copyright IBM Corp. 2000,2003 All rights reserved.
-------------------------------------------------------------------------------
Adapter Configuration
10/100 Mbps Ethernet PCI Adapter II: U0.1-P1/E1
1. Speed,Duplex
2. Spanning Tree Enabled
3. Protocol
-------------------------------------------------------------------------------
Navigation keys:
M = return to Main Menu
ESC key = return to previous screen X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:
吕星昊
2016.2.19
来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/29475508/viewspace-1991386/,如需转载,请注明出处,否则将追究法律责任。
转载于:http://blog.itpub.net/29475508/viewspace-1991386/