Document ID: 276739
http://support.veritas.com/docs/276739
Overview:
STATUS CODE: 156 "snapshot error encountered" occurs when utilizing VERITAS Volume Snapshot Provider (VSP) or Microsoft Volume Shadow Copy Service (VSS) for a client backup.[@more@]
Troubleshooting:
If a backup on a Windows NetBackup (tm) 5.0 or later client fails with status code 156, this indicates that the client is using Windows Open File Backups to protect open or active files. The volume "snapshot" that occurs to facilitate open file backup has failed. This failure is often caused by the VSP/VSS cache file running out of allocated space.
Master Log Files: N/A
Media Server Log Files: N/A
Client Log Files:
bpbkar
6:00:14.156 AM: [452.976] <2> tar_base::V_vTarMsgW: ERR - Snapshot Error while reading file: Volume{43877774-d2zz-4rar-r5id-fg9i49fuje7815}AccountsAkerfeldtdataAmm.txt
6:00:14.171 AM: [452.976] <2> tar_base::V_vTarMsgW: FTL - Backup operation aborted!
6:00:14.218 AM: [452.976] <2> tar_base::V_vTarMsgW: INF - EXIT STATUS 156: snapshot error encountered
Resolution:
Firstly, if Open file backups are not desired for the client, disable them. This will decrease the resources used by the client during backup and resolve any Status 156 errors. The default NetBackup install options are to have open file backups enabled.
To confirm if VSS or VSP open file backups are activated:
If open file backup functionality is needed, the most common cause for snapshot errors is cache file configuration. The steps on changing this depend on whether VSP or VSS is used as the Snapshot Provider.
If VSP is being used as the snapshot provider:
Access the Host Property settings for VSP:
Make sure the Customize the cache sizes check box is not selected. With this not selected, NetBackup automatically determines the best VSP cache file sizes. In most cases, NetBackup will be able to create a large enough VSP cache file for backups if this is not selected.
If errors still occur with this not selected, it is possible to increase the initial VSP cache size and maximum VSP cache size manually. These settings vary depending on the client's requirements. Use caution when manually specifying sizes for the Initial and Maximum Cache Size, since these settings will be used regardless of volume size.
Refer the NetBackup System Administrator's Guide for more information on changing the configuration of VSP cache file sizes. If backups still abort with error status 156 after making changes to the VSP cache file size configuration, there may not be enough free disk space on the affected client. Free up as much disk space on the drives of the affected client as possible.
For Volume Shadow Copy (VSS) (Windows 2003 Only):
Use the following steps to increase the cache size when VSS is used on Windows 2003 Server clients.
Operating Systems:
Windows 2000
http://support.veritas.com/docs/276739
STATUS CODE: 156 "snapshot error encountered" occurs when utilizing VSP or VSS for open file backups.
Exact Error Message
snapshot error encountered (156)
Details:
snapshot error encountered (156)
Overview:
STATUS CODE: 156 "snapshot error encountered" occurs when utilizing VERITAS Volume Snapshot Provider (VSP) or Microsoft Volume Shadow Copy Service (VSS) for a client backup.[@more@]
Troubleshooting:
If a backup on a Windows NetBackup (tm) 5.0 or later client fails with status code 156, this indicates that the client is using Windows Open File Backups to protect open or active files. The volume "snapshot" that occurs to facilitate open file backup has failed. This failure is often caused by the VSP/VSS cache file running out of allocated space.
Master Log Files: N/A
Media Server Log Files: N/A
Client Log Files:
bpbkar
6:00:14.156 AM: [452.976] <2> tar_base::V_vTarMsgW: ERR - Snapshot Error while reading file: Volume{43877774-d2zz-4rar-r5id-fg9i49fuje7815}AccountsAkerfeldtdataAmm.txt
6:00:14.171 AM: [452.976] <2> tar_base::V_vTarMsgW: FTL - Backup operation aborted!
6:00:14.218 AM: [452.976] <2> tar_base::V_vTarMsgW: INF - EXIT STATUS 156: snapshot error encountered
Resolution:
Firstly, if Open file backups are not desired for the client, disable them. This will decrease the resources used by the client during backup and resolve any Status 156 errors. The default NetBackup install options are to have open file backups enabled.
To confirm if VSS or VSP open file backups are activated:
1. Within the NetBackup Administration Console, expand
Host Properties in the hand pane
2
. Within
Host Properties, click
Master Server and then the double-click the name of the
Master Server in the right pane
3
. Click on the
Client Attributes section
4
. If the client in question is listed here, click on the client name. If it is not listed, add and click on the client name.
5. Click the
Windows Open File Backup tab
6. Ensure that
Enable Windows Open File Backups for this client is not selected if open file backups are not required
If open file backup functionality is needed, the most common cause for snapshot errors is cache file configuration. The steps on changing this depend on whether VSP or VSS is used as the Snapshot Provider.
If VSP is being used as the snapshot provider:
Access the Host Property settings for VSP:
1. Within the NetBackup Administration Console, expand
Host Properties in the left pane
2. Within
Host Properties, click
Clients and then double-click the name of the client in the right pane
3. Expand the
Windows Client section and click on
VSP to display cache settings
Make sure the Customize the cache sizes check box is not selected. With this not selected, NetBackup automatically determines the best VSP cache file sizes. In most cases, NetBackup will be able to create a large enough VSP cache file for backups if this is not selected.
If errors still occur with this not selected, it is possible to increase the initial VSP cache size and maximum VSP cache size manually. These settings vary depending on the client's requirements. Use caution when manually specifying sizes for the Initial and Maximum Cache Size, since these settings will be used regardless of volume size.
Refer the NetBackup System Administrator's Guide for more information on changing the configuration of VSP cache file sizes. If backups still abort with error status 156 after making changes to the VSP cache file size configuration, there may not be enough free disk space on the affected client. Free up as much disk space on the drives of the affected client as possible.
For Volume Shadow Copy (VSS) (Windows 2003 Only):
Use the following steps to increase the cache size when VSS is used on Windows 2003 Server clients.
1. In Windows, right-click
My Computer and select
Manage
2. In the console tree, right-click
Shared Folders, select
All Tasks, and then
Configure Shadow Copies
3. Select the volume on which to make changes, and then click the
Settings button
4. In the
Settings dialog box, change the
Maximum Size setting to either
No Limit or a size large enough to suit the requirements of the installation and usage of VSS
Products Applied:
NetBackup Enterprise Server 5.0, 5.1
NetBackup Server 5.0, 5.1
NetBackup Enterprise Server 5.0, 5.1
NetBackup Server 5.0, 5.1
Last Updated: May 10 2005 10:02 AM GMT
Expires on: 365 days from publish date
Subscribe to receive critical updates about this document
Expires on: 365 days from publish date
Subscribe to receive critical updates about this document
Subjects:
NetBackup Enterprise Server
Application: Backup
Best Practice: Backup, Configuration
NetBackup Server
Application: Backup
Best Practice: Backup, Configuration
NetBackup Enterprise Server
Application: Backup
Best Practice: Backup, Configuration
NetBackup Server
Application: Backup
Best Practice: Backup, Configuration
Languages:
English (US)
English (US)
Operating Systems:
Windows 2000
Advanced Server, Datacenter Server, Server
Windows NT
4.0 Server SP6a
Windows Server 2003
DataCenter, Enterprise Server, Standard Server
来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/789833/viewspace-1038374/，如需转载，请注明出处，否则将追究法律责任。
转载于:http://blog.itpub.net/789833/viewspace-1038374/
扫一扫
1099
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
