2013 Detroit Lions NFL draft watch

2013 http://www.officialchargersjerseyshop.com/56_donald_butler_jersey_authentic_black_limited_cheap.html Detroit Lions NFL draft watch

Each Saturday morning, during the college football season, we'll highlight a handful of prospects with Donald Butler Black Jersey locally televised matchups who could be a fit for the Detroit Lions in the 2013 NFL draft.

Blidi WrehWilson, www.officialchargersjerseyshop.com/94_corey_liuget_jersey_authentic_black_limited_cheap.html CB, UConn No. 5

At 6foot1, 190 pounds, he has the size NFL teams desire. The senior has eight career interceptions and has broken up another 35 passes, including 10 this year. With the depth at the cornerback position, he could could go anywhere between rounds 25.

McDuffie is one of the nation's fastest players and most explosive kick returners. He's had just 16 opportunities on kickoffs this season, but has brought back three for touchdowns. His career totals on 89 kickoff returns are 27.7 yards and six scores.

As an offensive weapon, he's a bit of a project, but has shown some versatility rushing for three touchdowns and catching two more on a pair of deep passes.

It's tough to get a feel for his draft stock, but McDuffie looks like a thirdday selection.

Everett Dawkins, DT, Florida State No. Over the past two seasons he's recorded 49 tackles, but just 4.5 for a loss with 2.5 sacks.

He plays on a defensive line with a wealth of NFL talent, and Dawkins has a skill set that should translate into success at the professional level. He's powerful, with a quick first step, which should allow him to contribute early as a rotational tackle in a 43 scheme.

Dawkins is likely to be drafted in the third or fourth round.

Ray Graham, RB, Pittsburgh No. 1

Graham was leading the nation in rushing last season before tearing his ACL. He's come back this year and continued to be Corey Liuget Elite Jersey productive, rushing for 948 yards (4.8 per carry). He's also a threat out of the backfield, catching 36 passes for 340 yards.

At 5foot9, 192 pounds, Graham is small, but he makes up for it with quickness and elusiveness. He figures to be drafted in the middle rounds this April.


http://aritjol.org/node/13869
http://duncan21.soup.io/
http://www.youmeandtheelephant.com/member/blog_post_view.php?postId=15545

来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/29227901/viewspace-773743/,如需转载,请注明出处,否则将追究法律责任。

转载于:http://blog.itpub.net/29227901/viewspace-773743/

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
在MATLAB中实现机械臂的仿真可以使用Robotic System Toolbox来进行。Robotic System Toolbox包含许多工具和函数,可以实现机械臂的建模、控制和仿真。 首先,需要定义机械臂的模型。可以使用robotics.RigidBodyTree类来创建机械臂的刚体树结构。通过添加关节和刚体可以构建机械臂的结构。可以使用函数robotics.RigidBody来创建刚体,并使用函数robotics.Joint来创建关节。 接下来,可以使用robotics.RigidBodyTree类中的函数来定义机械臂的初始状态。可以设置每个关节的初始位置和速度。 然后,可以使用robotics.RigidBodyTree类中的函数来进行机械臂的运动控制。可以使用函数robotics.InverseKinematics来实现逆运动学,根据目标位置和姿态来求解关节角度。可以使用函数robotics.CartesianTrajectory来生成机械臂的轨迹,指定起始和目标位置以及运动时间。 最后,可以使用robotics.RigidBodyTree类中的函数来进行机械臂的仿真。可以使用函数robotics.Rate来指定仿真的频率,然后使用循环来更新机械臂的状态和控制输入,实现机械臂的运动。 以下是一个基本的机械臂仿真的示例代码: ```matlab % 创建机械臂模型 robot = robotics.RigidBodyTree; % 添加机械臂的关节和刚体 % 设置机械臂的初始状态 % 运动控制 % 仿真循环 % 绘制机械臂的运动轨迹 ``` 在实际的机械臂仿真中,可能还需要考虑机械臂的动力学、碰撞检测和路径规划等问题。可以使用Robotic System Toolbox中的其他工具和函数来处理这些问题。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值