http://www-01.ibm.com/support/docview.wss?uid=swg21437631
Technote (FAQ)
Question
Getting the error in ObjectServer.log "Configuration of 30 connections has been exceeded."
Cause
Omnibus exceeded it's default setting of 30
Answer
Change number of connections via, $OMNIHOME/bin/nco_objserv -connections 256 ( or props file ) - to allow 256 max connections from the default of 30. ( or set the
connections value in the objectserver to the required value and restart
来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/22775238/viewspace-683548/,如需转载,请注明出处,否则将追究法律责任。
转载于:http://blog.itpub.net/22775238/viewspace-683548/