The size and location of the point of crushing force is structural strength and design of jaw crusher is also used to select the parameters calculated on the basis of the main motor power indispensable. As the basis for the design of the crusher Sicoma Planetary Concrete Mixer mobile batching plant for sale, it is necessary to measure the crushing force working under different conditions in different models of jaw crusher. There are two more types of measurement method, the direct measurement or indirect measurement.
Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows: Diesel drum mixers, Concrete Planetary Mixer, diesel concrete mixer for sale,etc. We will provide you with the best product and service.
Direct measurement of Use four pressure sensors in the front rack fixed to the wall, and have carried out a mechanical rating on the press ring fixed jaw by lifting the ball. When operating principle crusher crushed in the crushing chamber, the resistance material will be sent through the fixed jaws and the ball 4 is pressed to the head ring, and the strain measurement signal pressure head, the amplitude and the point of force of crushing position can be calculated. Such measurement with high accuracy, but the disadvantage that it requires the manufacture of special attachments to the pressure sensor and measuring the pressure and the need to repair the machine head front wall installation.
来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/30200755/viewspace-1651842/，如需转载，请注明出处，否则将追究法律责任。
转载于:http://blog.itpub.net/30200755/viewspace-1651842/
扫一扫
2723
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
