我今天的verilog程序语法检测已通过,在综合时先后如下错误提示:
错误1: “ERROR: Unable to launch the RTL Schematic process. The input NGR file”
错误2: “can not fnd the module/primitive".......".” (提示不能打开某一个你已经在工程中定义了的module)
解决办法:
错误1:
Please rerun the "Synthesize - XST" process after setting the property "Generate RTL Schematic" to Yes or Only.
错误2: 提示缺少那个module,你就将那个module的 ".v"文件用include编译指令给它包含进你出现错误的verilog程序中(严格来讲,一个project中的module的引用是不需要include的).
如: `include "<module_name.v>"
OK,问题解决掉了, 至于为什么,网上大家都说这ISE 10.1的错误。
错误1: “ERROR: Unable to launch the RTL Schematic process. The input NGR file”
错误2: “can not fnd the module/primitive".......".” (提示不能打开某一个你已经在工程中定义了的module)
解决办法:
错误1:
Please rerun the "Synthesize - XST" process after setting the property "Generate RTL Schematic" to Yes or Only.
错误2: 提示缺少那个module,你就将那个module的 ".v"文件用include编译指令给它包含进你出现错误的verilog程序中(严格来讲,一个project中的module的引用是不需要include的).
如: `include "<module_name.v>"
OK,问题解决掉了, 至于为什么,网上大家都说这ISE 10.1的错误。