vertical roller mill working principle

LUM series vertical roller mill mainly powder selecting machine, roll grinder, grinding disc device, pressure device, reducer, motor, shell and other components. The separator is a kind of high efficient, energy-saving powder selecting device. The grinding roller is used for rolling grinding parts of materials. Grinding disc is fixed on the output shaft of reducer, grinding roll material. When the pressure roller pressure device in order to provide the parts of the grinding roller, provide enough pressure to the grinding roller to crushing material.

Vertical roller mill has many different forms, but it works basically the same. All of these forms of machine comes with roller (or the equivalent of roller grinding parts), and roller along the track of the disc at the level of circular movement imposed by external grinding roller in the vertical pressure on the disc on the material being the joint action of compression and shear, and to crush.

It has two pairs of grinding rollers, each pair of roller composed of two narrow rollers, mounted on the same axis and can rotate at different speeds. There are two circular disc slot, and roller to the tire shape, work pressure in the tank. Disc roller and the relative sliding velocity between small and roller can swing, even if the roller sleeve and the disc after the liner wear can guarantee a good abrasive, will not affect the grinding effect. Roller symmetrical structure, one side can be upside down after use and wear.

Material through the feed tube fell on the center of vertical roller mill grinding plate, centrifugal force generated from the rotation of grinding plate uniformly scatters and flattens the materials outwards the surrounding area of vertical roller mill grinding plate, to forms a certain thick layer of materials bed, the material was crushed by number of rollers at the same time. Driven by the continuous centrifugal force to keep the materials moving to the outer edge of the grinding plate, the materials off the grinding plate rising with the hot air which enter from wind ring into the vertical roller mill, through the vertical roller mill shell into the middle of the separator, in this course materials and hot gas do a fully heat exchange, and the water quickly evaporates. Separator controls the output size of finished product, greater than the specified size are separated and fall back to the plate, while meet the fineness requirements are brought through the separator into the finished product warehouse.

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/30036362/viewspace-1446267/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/30036362/viewspace-1446267/