一、TSM软件安装
1.TSM Server软件的安装
A、以root用户登陆
B、通过#smitty installp进行软件的安装
选择相应的软件包进行安装：Tivoli.tsm.server.rte 、Tivoli.tsm.server.com 、Tivoli.tsm.server.webadmin 、Tivoli.tsm.license.rte 、Tivoli.tsm.license.cert 、Tivoli.tsm.devices.aix43.rte 。
2.TSM 客户端软件安装
A、以root用户登陆
B、通过#smitty installp进行软件的安装
选择相应的软件包进行安装：Tivoli.tsm.client.ba.aix43.32bit下的Backup/Archive Base files、Backup/Archive Common Files 、Tivoli.tsm.client.books 、Tivoli.tsm.client.web.aix43.32bit、 tivoli.tsm.client.image.aix43.32bit 。
3.TSM for Oracle的软件的安装
A、以root用户登陆
B、通过#smitty installp进行软件的安装
选择相应的软件包进行安装：tivoli.tsm.client.api.aix43.64bit、tivoli.tsm.client.oracle.64bit、tivoli.tsm.client.oracle.tools.64bit 。
二、修改环境变量和配置文件
1.TSM Server和TSM Client安装完成后对进行环境变量的修改。
在TSM Server的.profile文件增加如下内容：
export DSMSERV_DIR=/usr/tivoli/tsm/server/bin
export DSMSERV_CONFIG=/usr/tivoli/tsm/server/bin/dmserv.opt
在TSM Client的.profile文件增加如下内容：
export DSM_DIR=/usr/tivoli/tsm/client/ba/bin
export DSM_CONFIG=/usr/tivoli/tsm/client/ba/bin/dsm.opt
export DSM_LOG=/usr/tivoli/tsm/client/ba/bin
2.修改TSM Server的dsmserv.opt文件
解除屏蔽选项：
COMMmethod TCPIP
COMMmethod HTTP
添加下面两行：
TCPPort 1500
HTTPPort 1580
3.修改TSM Client的dsm.opt和dsm.sys文件
在dsm.opt文件中指定TSM Server：
Servername tsm（说明此处为TSM Server的名字）
在dsm.sys文件中添加如下内容：
SErvername tsm
COMMmethod TCPip
TCPPort 1500
TCPServeraddress xxx.xxx.xxx.xxx
nodename xxxxxxx
passwordaccess generate
managedservices webclient schedule
4.修改/usr/tivoli/tsm/client/oracle/bin/tdpo.opt
DSMI_ORC_CONFIG /usr/tivoli/tsm/client/api/bin64/dsm.opt
DSMI_LOG /usr/tivoli/
TDPO_FS adsmorc
TDPO_NODE tdpora1
TDPO_OWNER root
TDPO_PSWDPATH /usr/tivoli/tsm/client/oracle/bin64
TDPO_DATE_FMT 1
TDPO_NUM_FMT 1
TDPO_TIME_FMT 1
三、TSM 进程管理
1.启动TSM Server
#/usr/tivoli/tsm/server/bin/dsmserv quiet &
2.启动TSM Client
#/usr/tivoli/tsm/client/ba/bin/dsmcad
3.停止TSM Server
#/usr/tivoli/tsm/server/bin/dsmadmc(输入提示的用户、口令)
dsmadmc>;halt
4.停止TSM Client
通过ps –ef|grep dsmcad 查找出对应的PID，然后通过kill命令停止进程。
四、TSM软件配置
1.在操作系统检查磁带库设备硬件
#lsdev –Cc tape（会看到rmtx和smc0 的状态为Avaliable），如不能看到则需要安装3583磁带库的驱动程序，具体安装方法请参见3583相关资料。
2.磁带库配置
A、使用tapeutil找到Driver的element值#tapeutil
B、选择“open a device”：/dev/smc0
C、选择“elements Information”，就可以得到Driver和Slots的elements值。
E、定义磁带库
define library autolib libtype=scsi（定义一个名字为autolib的SCSI磁带库）。
F、定义磁带库的PATH（定义TSM SERVER名为TSM所连的接磁带库autolib在TSM SERVER中的设备PTAH：/dev/smc0）。
define path tsm autolib srctype=server desttype=library device=/dev/smc0 nline=yes
G、定义磁带机（Driver）（定义磁带库autolib中的磁带机，磁带机的名字叫做 driver01）。
define drive autolib drive01 element=256
H、定义磁带机（Driver）的PATH（定义TSMSERVER名为TSM所连接的磁带库autolib中的磁带机在TSM SERVER中的设备PATH）。
define path tsm drive01 srctype=server desttype=drive library=autolib device=/dev/rmt0 nline=yes
I、定义设备CLASSES
define devclass ltotape devtype=lto library=autolib format=ultriumc mountlimit=drives mountretention=5 estcapacity=200G
J、检查磁带库的相关配置
query library、query driver、query path、query devclasses
K、定义磁带存储池
define stgpool 3583_pool ltotape maxscratch=20（定义ltotape设备类使用的磁带存储池3583_pool）。
3.调整TSM DB 和LOG空间的大小
define dbvolume /tsmdata/dblog/db01.dsm formatsize=160 wait=yes
extend db 160
dfine logvloume /tsmdata/dblog/log01.dsm formatsize=100 wait=yes
extend log 100
define spacetrigger db fullpct=85 spaceexpansion=25 expansionprefix=/tsmdata/dblog/
define spacetrigger log fullpct=85 spaceexpansion=25 expansionprefix=/tsmdata/dblog/
reduce db 16
reduce log 8
delete dbvolume /usr/tivoli/tsm/server/bin/db.dsm
delete logvolume /usr/tivoli/tsm/server/bin/log.dsm
安装TSM SERVER时默认的db和log的大小分别是16，8MB。
4.备份策略的设置
Storage management policies are rules your administrator defines in order to manage your backups and archives on the server（Storage managermanet policies是管理员为了在服务端管理备份和归档定义的一种规则）。You can associate (or bind) your data to these policies（你能够绑定你的数据到这些Policies）；when the data is backed up or archived, it is managed according to policy criteria（当数据被备份或归档被相应Policy标准管理）。Policy criteria include a policy domain, and a management class ，a policy set, a copy group。
policy决定了是否一个文件或目录适合备份或归档、保留多少个备份版本、非激活状态的备份和归档拷贝保留多长时间、拷贝存放在何处。
Policy daemon是一组有相类似备份或归档需求数据的客户机的集合（A policy domain is a group of clients with similar requirements for backing up and archiving data.）。Policy domains contain one or more policy sets。
A policy set is a group of one or more management classes。
A management class is a collection of backup and archive copy groups that establishes and contains specific storage management requirements for backing up and archiving data.
Within a management class, the specific backup and archive requirements are in copy groups. Copy groups define the specific storage management attributes that describe how the server manages backed up or archived data. Copy groups include both backup copy groups and archive copy groups. A management class can have one backup copy group, one archive copy group, both, or neither。
A、创建备份 client node
B、通过WEB方式建立Policy daemon，选择object class/Policy daemon/define a Policy daemon
C、选择Policy daemon下面的.Policy sets/define a policy sets，并将policy set给Active
D、选择Policy sets下面的ManageClass/define a manageclass
E、选择ManagClass下面的Copy Group
F、将Client node分配到相应的Policy daemon
5.
6.
五、文件系统备份
六、RMAN的配置
安装一套独立与生产数据库之外的ORACLE数据库作为catalog database，最好安装在不同的主机上。
1.在catalog数据库服务器上创建RMAN所需要的表空间
$svrmgrl
svrmgrl>;connect system/manager
svrmgrl>;create tablespace rman_ts datafile ‘;/;’
>;size 100M autoextend on next 100M maxsize 300M；
2.创建RMAN用户并赋予角色及权限
svrmgrl>;create user rman identified by rman
>;default tablespace rman_ts
>;temporary tablespace temporary
>;quota unlimited on rman_ts;
svrmgrl>;grant recovery_catalog_owner to rman;
svrmgrl>;connect / as sysdba;
svrmgrl>;grant dba,connect,resource to rman;
3.创建recovery catalog的表结构
$rman target internal/oracle@targetSID rcvcat rman/rman@recoverycatalogSID
rman>;create catalog;
4.在catalog数据库中对目标数据库进行注册
rman>;register database;
七、ORACLE数据库的备份
Database备份script：
run {
allocate channel d1 type sbt_tape connect internal/manager@scdb2 parms
ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo.opt);
allocate channel d2 type sbt_tape connect internal/manager@scdb1 parms
ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo.opt);
backup
format ctl_t%t_s%s_p%p
tag cf
(current controlfile);
backup
full
filesperset 8
format db_t%t_s%s_p%p
tag fulldb
(database);
release channel d1;
release channel d2;
}
Archivelog的备份script.:
run {
allocate channel d1 type sbt_tape parms
ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo.opt)
connect internal/manager@scdb1;
sql alter system archive log current;
backup
format arch_t%t_s%s_p%p
(archivelog
like /jfbackup/arch_log/arch_1_%.arc
delete input);
release channel d1;
}
run {
allocate channel d2 type sbt_tape parms
ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo.opt)
connect internal/manager@scdb2;
sql alter system archive log current;
backup
format arch_t%t_s%s_p%p
(archivelog
like /jfbackup/arch_log/arch_2_%.arc
delete input);
release channel d2;
}
同时还可以对指定的tablespace datafile进行备份，具体请参见RMAN相关手册。
手工执行ORACLE的备份：
rman target internal/oracle@targetSID rcvcat rman/rman@recoverycatalogSID cmdfile=/xxx/xxx msglog=xxx.log
八、ORACLE数据库的恢复
run {
allocate channel d3 type sbt_tape connect internal/manager@scdb1 parms
ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo.opt);
allocate channel d4 type sbt_tape connect internal/manager@scdb2 parms
ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo.opt);
restore controlfile;
alter database mount;
restore database;
recover database;
release channel d1;
release channel d2;
sql "alter database open resetlogs";
}
九、
Twelve Steps to Configuring Your Tsm Environment
1、Install the TSM code on the machine that will be your TSM server (referred to as server).This process may involve a few steps that are dependent on your platform. type.Please read the Quick Start Guide and REAMES for yout platform.
2、At the install time you had created default DB and LOG volumes.Now you want to supportment or replace that initial configuration.
A、Add additional DB volumes.i.e. def dbv filename f=volsize Note:make sure they are on separate physical disks form. other DB vols,LOG vols or mirrors of their LOGs or DBs.
B、Extend the data base to use the newly added space.i.e ext db 100
C、Add additional LOG volumes,i.e.def logv filename f=volsize Notice:Same rules apply for LOG volumes as DB volumes.
D、Extend the log to use the newly added space.i.e ext log 100
E、You may have to delete the default volumes that were created during install,i.e del dbv filename or del log filename Notice:You may have to reduce the DB or LOG in order to delete the volume i.e.reduce db 16
3、Now configure you dsmserv.opt file.Read though the default file.There are serval values you may wish to set or adjust.
A、Set yout COMMMethods and there related attributes
B、Set VOLHISTORY and DEVCONFIG,remember make 2 copies
C、Set EXPInterval 0,this will disable expiration.You will have a admin schedule take care of this
D、Set various performance releated attributes,i.e. TCPNODELAY,TCPWindowsize,MAXSessions,BUFPoolsize,LOGPoolsize,TXNGroupmax.etc
E、To use the Web Admin Client set COMMM tcpip,HTTPPort 1580,1580 is the default port number
4、Now you must defined the Libraries,Drivers and Device Classes your system will use
A、You must define libraries frist.Both manual and automated libraries can be defined,i.e.manual –def lib manlib libtype=manual or automated –def lib autolib libtype=scsi device=dec_spec
B、Now define drives in your libraries,i.e manual –def dr manlib mandr device=dec_spec or def dr autolib autodriv1 device=dec_spec element=element#
C、Now we can create device classes.You can have more than 1 device class use the same library if yoy like.Notelease refer to the documentation for def dev command.There are many options available.
5、Once we have Device Classes we can create Storage Pools that will use them,also,we must establish or SP hierarchy.
A、Determine the number of top level pools you will need.They will typically be Disk based SPs
B、Next decide on the hierarchy from the top levels to the final pools.Make sure you consider things like:Backup vs Archive data,Collocation,Offsite (copy pools) vs Local.etc.
C、Create the necessary storage pools with the appropriate attributes.In particular consider,the valus for migration,reclamation and next storage pool as they will also affected by your administrative schedules.Nore: Please consult the documentation for the def stg command.There are many options available.
6、Nextt you right create Policy Domian(s) and right Policy that is reflective of your Service Level Agreement(SLA).
A、Determine how you will group your manages systems.i.e.1 Policy Domain or several.
B、Create you policy domain(s).Note:The following steps will be repeated for each Policy domain
ü def do mydomain
ü def po mydomain myposet
ü def mg mydomain myposet mymc Note:Create as many Management Classes as necessary.
ü def co mydomain myposet mymc standard type=backup…
ü def co mydomain myposet mymc standard type=archive…
Note:above two lines are optional for any given Management Class
ü as defmg mgname
ü val po mydomain myposet
ü act po mydomain myposet
Note:Each of the above steps have many options,especially the def co commands,so please consult the documentation
7、You probably want to go home at night so lets define some client schedules.Please remember client schedules are within a given Policy Domain,therefore you may want to right a schedule once and copy it to different domains if necessary.
A、Create a schedule to do your nightly Incremental backups.Your clients Domain and Include/Exclude list should be written so that all that is need in the schedule is just I with no file specification given.
B、Right any other schedules that maybe appropriate for you needs.Note:def sch command has several options,so please consult the documentation.
8、The server will need some schedules as well.The followingis just a list of some things you should consider for scheduling.This is not intend to be a complete list nor do I attempt to make a 24 hour plan.The timings will depand entirely on your environment.There is a good example of a 24 hour schedule plan in the “Getting Statrted with Tivoli Storage Manager:Implementation Guide”.
A、migration,reclamation,expiration,DB Backups, SPs Backups,Clean Volhist, backup Volhist and Devconfig,DRM
B、Consider the time and order to do these things,in general do one things at a time,backup the DB after large changes
C、Remember to allow down time in your schedule.That is time when nothing is scheduled,so you can catch up if needed
9、There are just a few other miscellaneous server function left.
A、Create your client option sets.these are client options that you are going to override at the server.
ü Define one or more client option sets.i.e.def clo ntclients
ü Next define the various options for each client option set.i.e.def cliento ntclients compress no
B、Add any additional administrators thal you will need,i.e.server admins,help desk workers,operators,etc.
ü reg admin jradmin jrpasswd
ü grant auth jradmin…
Note:Consult the documentation for all the extra options.
C、Label and checkin tape media.For NT,W2K and UNIX you can use the label libvol command.
10、Now it is time at register you managed system(refereed to as clients).
A、Things to consider at registration time,what domain and client option set to associate them with.
B、reg node node_name node_password domain= domain_name clopset=ntclients
C、This must be done for every managed system,consider scripting it if you have a large number of clients.
D、You must associate the node with the schedules you would like it to use.i.e.def assoc domain schedule node
Note:You can only associate nodes to schedules within their domain
11、The managed system(clients) must have the client code installed.Consult the “Installing the Clients Guide” for details on the different platforms that you will be using.
12、Once the clients are installed you will need to update the dsm.opt file and the dsm.sys(unix only) file.
A、Select a(just one)COMMMethod and configure any associated parms for that method,i.e.COMMM tcpip,TCPPort 1500,TCPServer server.dot.decimal.addr
B、Configure schedule log,error log and their retention time,i.e.SCHEDLOGName dsmsched.log,SCHEDLOGRetention 10,ERRORLOGName dsmerr.log
C、Set performance related attributes.Consult the documentation for appropriate values for your environment,i.e.TCPB,TCPW,TXNB,etc.
D、Configure you Domain and Include/Exclude statements.The goal here is to eliminate those files you do not wish to backup and to bind particular files to a specific Management Class.
E、Insure that the dsmc sched program runs either as a service or a daemon when the client is rebooted.
F、Set passwordaccess generate This will allow the scheduler to authenticate automatically.
G、Configure the client to be accessed through the web client interface.
ü This will vary from platform. to platform. so please consult the Installing the Clients manual.
ü In general,you will need to have the TSM client acceptor service/daemon running.
ü TSM Client Acceptor service/daemon is generally started at boot time.
ü Passwordaccess generate is required in the dsm.opt(dsm.sys for unix) file.
TSM server安装
步骤一
smit安装所需要的软件包：
Tivoli.tsm.server.rte
Tivoli.tsm.server.com
Tivoli.tsm.server.webadmin
Tivoli.tsm.license.rte
Tivoli.tsm.license.cert
Tivoli.tsm.devices.aix43.rte
步骤二
修改环境变量
export DSMSERV_DIR=/usr/tivoli/tsm/server/bin
export DSMSERV_CONFIG=/usr/tivoli/tsm/server/bin/dmserv.opt
步骤三
修改dsmserv.opt文件
解除屏蔽：
COMMmethod TCPIP
COMMmethod HTTP
添加：
TCPPort 1500
HTTPPort 1580
步骤四
建立server的自动运行：
在TSM server软件包安装完成后，系统自动在inittab中添加了自动运行：
autosrvr:2nce:/usr/tivoli/tsm/server/bin/rc.adsmserv >;/dev/console 2>;&1
注意：在有HA的情况下，不能使用该方式。
手动运行server：
dsmserv quiet &
步骤五
修改server名称等属性：
对象视图->;服务器->;服务器状态
注意：口令有效期限
步骤六
使用命令行注册license
reg lic file=[license file] number
在TSM server安装完成后，在/usr/Tivoli/tsm/server/bin下会产生多个后缀为lic的license
文件，据此注册。
在本次安装中，使用：
reg lic file=*.lic number=2
步骤七
格式化DB、LOG和磁盘存储池所需要的空间
例如：
dsmfmt -m -db /tsmdata/db01.dsm 300
dsmfmt -m -log /xzbackup/tsmdata/log01.dsm 300
dsmfmt -m -data /xzbackup /tsmdata/babkvol.dsm 200
dsmfmt -m -data /xzbackup /tsmdata/baarcvol.dsm 200
dsmfmt -m -data /xzbackup /tsmdata/tdpbkvol.dsm 200
`
步骤八
扩展DB和LOG
使用web方式：
object view ->; Database ->; Database Volumes ->; Operations: ->; Define Database Volume
object view ->; Recovery log ->; Recovery log vo.umes ->; Operations: ->; Define Recovery log volume
步骤八
新建babkpool
baarcpool
tdpbkpool
Storage Pool Name
Description
Media Access Status
Maximum Size Threshold
Next Storage Pool
High Migration Threshold
Low Migration Threshold
Cache Migrated Files? YES NO
Migration Processes
Migration Delay
Migration Continue YES NO
Copy Storage Pool(s)
Continue Copy on Error? YES NO
CRC Data YES NO
步骤九
定义与3583带库有关的对象
3583设备文件名：
库设备为/dev/smc0
drive为/dev/rmtx
若系统中已经有一个DDS带机（dev/rmt0），那么带库中的第一个drive设备名称
为/dev/rmt1。
使用tapeutil查找3583 drive的element号
1．# tapeutil
2. 选：“1. Open a Device”，输入device名称：/dev/smc0
3．选：“12. Element Information”，便可查找到drive的element号。
一般来说第一个drive的element号为256
定义库
select object view ->; server storage ->; Libraries and Drives ->; Automated Libraries ->; Operations: ->; Define Automated Library
library name : 3583
device: /dev/smc0
定义驱动器
驱动器一：
select object view ->; server storage ->; Libraries and Drives ->; Automated Drives ->; Operations: ->; Define Automated Drive
Library Name 3583
Drive Name 3583_drive1
Device /dev/rmt1
Element 256 ( 256 just for 3583 drive 1, you should find out element information via tapeutil )
Device On-Line YES NO
Cleaning Frequency (Gigabytes/ASNEEDED/NONE)
驱动器二：
define second drive
select object view ->; server storage ->; Libraries and Drives ->; Automated Drives ->; Operations: ->; Define Automated Drive
Library Name 3583
Drive Name 3583_drive2
Device /dev/rmt2
Element 257 ( you should find out element information via tapeutil )
Device On-Line YES NO
Cleaning Frequency (Gigabytes/ASNEEDED/NONE)
定义LTO设备类
For 3583:
select object view ->; server storage ->; Device Classes ->; LTO Device Classes ->; Operations: ->; Define Device Class
Device Class Name 3583_Class
Recording Format Drive
Library Name 3583
Mount Limit DRIVES
&nbs, p; Mount Retention 60
Tape Volume Prefix ADSM
Estimated Capacity
Mount Wait 60
步骤十
1．为BA建立策略域
（先用默认值）
badomain
2．为TDP client建立策略域tdpdomain
注意：TDP client所使用的拷贝副本组属性必须是：
VERDELETED=0
RETONLY=0
为TDP建立策略域、策略集、管理类示例：
tsm: BRAZIL>;def domain api_domain DESC=DO for all DB-Backups
ANR1500I Policy domain API_DOMAIN defined.
tsm: BRAZIL>;
tsm: BRAZIL>;def policyset api_domain api_policy DESC=PO for all DB Backups
ANR1510I Policy set API_POLICY defined in policy domain API_DOMAIN.
tsm: BRAZIL>;def mgmtclass api_domain api_policy api_mgmtclass DESC=MC for all DB-Backups
ANR1520I Management class API_MGMTCLASS defined in policy domain API_DOMAIN, set API_POLICY.
tsm: BRAZIL>;
以下为建立拷贝副本组，需注意选项值：
tsm: BRAZIL>;def copygroup api_domain api_policy api_mgmtclass type=archive DEST=api_disk retver=nolimit
ANR1535I Archive copy group STANDARD defined in policy domain API_DOMAIN, setAPI_POLICY, management class API_MGMTCLASS.
tsm: BRAZIL>;def copygroup api_domain api_policy api_mgmtclass type=backup DEST=api_disk_ vere=1 verd=0 rete=0 reto=0
ANR1530I Backup copy group STANDARD defined in policy domain API_DOMAIN, set
API_POLICY, management class API_MGMTCLASS.
步骤十一
建立include-exclude list
在client的dsm.sys中加入：
1．domain /home /usr /datasave
当使用命令时dsmc incremental -domain="/fs1 /fs2"将备份domain指定的/home, /usr, /datasave文件系统，以及备份命令中由-domain指定的/fs1和/fs2文件系统
步骤十二
建立调度
持续时间：5小时
周期：根据用户需求而定，每隔多长时间务器调度运行一次。
测试调度
可先调整一个合适的时间测试完成后再调回
B-A安装配置
步骤一．
Smit安装B-A client所需要安装的软件包
Tivoli.tsm.client.ba.aix43.32bit下的：
Backup/Archive Base files
Backup/Archive Common Files
Tivoli.tsm.client.books
Tivoli.tsm.client.web.aix43.32bit
tivoli.tsm.client.image.aix43.32bit
(api在TDP安装时安装)
步骤二
修改环境变量
export DSM_DIR=/usr/tivoli/tsm/client/ba/bin
export DSM_CONFIG=/usr/tivoli/tsm/client/ba/bin/dsm.opt
export DSM_LOG=/usr/tivoli/tsm/client/ba/bin
（以下为server端的环境变量：
export DSMSERV_DIR=/usr/tivoli/tsm/server/bin
export DSMSERV_CONFIG=/usr/tivoli/tsm/server/bin/dmserv.opt）
步骤三．
需要修改的文件：
dsm.opt文件：
Servername tsm
dsm.sys文件：
SErvername tsm
COMMmethod TCPip
TCPPort 1500
TCPServeraddress 133.54.9.11
nodename client1
passwordaccess generate
managedservices webclient schedule
步骤四
启动dsmcad
/usr/Tivoli/tsm/client/ba/bin/dsmcad
TDP for Oracle客户端安装
smit安装以下软件包：
tivoli.tsm.client.api.aix43.64bit
tivoli.tsm.client.oracle.64bit
tivoli.tsm.client.oracle.tools.64bit
编辑tdpo.opt文件：
在/usr/tivoli/tsm/client/oracle/bin/目录下新建文件tdpo.opt
***************************************************************************
* Tivoli Storage Manager - Tivoli Data Protection for Oracle
*
* Sample tdpo.opt for the AIX TDP for Oracle
*********************************************************************
DSMI_ORC_CONFIG /usr/tivoli/tsm/client/api/bin64/dsm.opt
DSMI_LOG /usr/tivoli/
TDPO_FS adsmorc
TDPO_NODE tdpora1
TDPO_OWNER root
TDPO_PSWDPATH /usr/tivoli/tsm/client/oracle/bin64
TDPO_DATE_FMT 1
TDPO_NUM_FMT 1
TDPO_TIME_FMT 1
*TDPO_MGMT_CLASS2 mgmtclass2
*TDPO_MGMT_CLASS3 mgmtclass3
*TDPO_MGMT_CLASS4 mgmtclass4
编辑api client的dsm.opt文件
* SErvername A server name defined in the dsm.sys file
SErvername tsm
编辑api client的dsm.sys文件
Servername tsm
COMMmethode TCPip
TCPPort 1500
TCPServeraddress 133.54.9.11
nodename tdpora1
PASSWORDAccess prompt
在TSM server注册api client（tdpora1）
初始化password:
使用tdpoconf password -tdpo_optfile=[TDP for Oracle option文件]
如果tdpo.opt在默认目录下，该命令可不需要参数
产生的password文件名为：TDPO.[节点名] （注意大小写）
该口令与TSM server注册该节点时的口令相同
注意：如果在运行tdpoconf时出现错误，那么可能是api64目录下的dsm.sys和dsm.opt文件，以及tdpo.opt文件的内容或文件属性有问题。比较.smp文件的属性，以其为准。
确认安装
1．显示TDP的环境变量：
tdpoconf showenv
显示：
重新连接oracle备份的库文件
1．关闭oracle
2．重新连接库文件：
#rm $ORACLE_HOME/lib/libobk.a
#ln -s /usr/lib/libobk.a $ORACLE_HOME/lib/libobk.a
3．启动oracle
来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/31344955/viewspace-2123544/，如需转载，请注明出处，否则将追究法律责任。
转载于:http://blog.itpub.net/31344955/viewspace-2123544/
270
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
