linux No suitable device found: no device found for connection 'System eth0'

在对network 进行restart 提示如下信息

点击(此处)折叠或打开

1. [root@mhxy171 ~]# service network restart
2. Shutting down loopback interface: [ OK ]
3. Bringing up loopback interface: [ OK ]
4. Bringing up interface eth0: Error: No suitable device found: no device found for connection 'System eth0'.
5. [FAILED]
6. [root@mhxy171 ~]#

确认以下信息， 在是udev中rule的 ATTR{address}值 和HWaddr 与ifcfg-eth0 中hwaddr不对称。

点击(此处)折叠或打开

1. [root@mhxy171 ~]# ifup eth0
2. Error: No suitable device found: no device found for connection 'System eth0'.
3. [root@mhxy171 ~]# ls /etc/sysconfig/network-scripts/
4. ifcfg-eth0 ifdown-bnep ifdown-ipv6 ifdown-ppp ifdown-tunnel ifup-bnep ifup-ipv6 ifup-plusb ifup-routes ifup-wireless network-functions
5. ifcfg-lo ifdown-eth ifdown-isdn ifdown-routes ifup ifup-eth ifup-isdn ifup-post ifup-sit init.ipv6-global network-functions-ipv6
6. ifdown ifdown-ippp ifdown-post ifdown-sit ifup-aliases ifup-ippp ifup-plip ifup-ppp ifup-tunnel net.hotplug
7. [root@mhxy171 ~]# cat /etc/udev/rules.d/70-persistent-net.rules
8. # This file was automatically generated by the /lib/udev/write_net_rules
9. # program, run by the persistent-net-generator.rules rules file.
10. #
11. # You can modify it, as long as you keep each rule on a single
12. # line, and change only the value of the NAME= key.
14. # PCI device 0x15ad:0x07b0 (vmxnet3)
15. SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:50:56:bf:68:9c", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
17. # PCI device 0x15ad:0x07b0 (vmxnet3)
18. SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:50:56:b9:53:ab", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
19. [root@mhxy171 ~]# ifconfig
20. eth1 Link encap:Ethernet HWaddr 00:50:56:B9:53:AB
21. inet addr:192.168.0.159 Bcast:192.168.0.255 Mask:255.255.255.0
22. inet6 addr: fe80::250:56ff:feb9:53ab/64 Scope:Link
23. UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
24. RX packets:3681 errors:0 dropped:0 overruns:0 frame:0
25. TX packets:309 errors:0 dropped:0 overruns:0 carrier:0
26. collisions:0 txqueuelen:1000
27. RX bytes:263826 (257.6 KiB) TX bytes:41185 (40.2 KiB)
29. lo Link encap:Local Loopback
30. inet addr:127.0.0.1 Mask:255.0.0.0
31. inet6 addr: ::1/128 Scope:Host
32. UP LOOPBACK RUNNING MTU:16436 Metric:1
33. RX packets:50 errors:0 dropped:0 overruns:0 frame:0
34. TX packets:50 errors:0 dropped:0 overruns:0 carrier:0
35. collisions:0 txqueuelen:0
36. RX bytes:3348 (3.2 KiB) TX bytes:3348 (3.2 KiB)
38. [root@mhxy171 ~]#

解决方式：
1、修改ifcfg-eth0中的hwaddr值， 
2、删除/etc/udev/rules.d/70-persistent-net.rules 文件
3、重启服务后

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/27039319/viewspace-2123602/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/27039319/viewspace-2123602/