BCMSN试题解析(10题)(转)

BCMSN试题解析(10题)(转)[@more@]

　　1.Which of the following are true of unicast IP？

　　

　　

　　It can be either TCP or UDP

    It uses a class D address A server transmitting unicast

    IP does not need to ‘know’ the recipient‘s address

　　

　　 2.Which of the following are true of remote services？

　　They are centralized and therefore

    require transport across the backbone to reach the user

    They are common to all users They are on a different VLAN

    than the user They are typically connected

    to the user via a layer 2 switching path

　　

　　 3.Which of the following is a form of out-of-band management？

　　Web-based management Console port LAT TELNET

　　

　 　4.Spanning tree protocols puts a port in one of 5 states.

    Which of the following is true of the forwarding state？

　　No frames are forwarded. BPDU‘s are heard.

    No frames are forwarded. No BPDU’s are heard.

    No frames are forwarded. Learning Addresses.

    Frames are forwarded. Learning addresses.

　　

　　 5.What security measures does Cisco suggest

    in the access layer of their recommended campus architecture？

　　Route filtering Cisco recommends no security measures

    in the access layer Device security such as passwords

    Port security

　　

　　 6.Telnet access directly to a switch or router command

    uses what facility？

        slip server async port line

　　

　　 7.What mechanism can be used to prevent ‘rogue’

    HSRP routers from asserting high priorities and

    becoming the active router？

　　MD5 authentication may be used in HSRP messages

    Plain text authentication may be used in HSRP messages

    The command ‘standby （group_number）access-group （access_list）’

    is used to specify the routers that may participate

    in an HSRP group Each HSRP router is explicitly

    configured with the address of the other routers

    in the group using

    the command ‘standby （group_number） （group_member_address）

　　

　　 8.What command will set duplex mode

    on a set based switch to half？

　　 9.Which of the following are true of a LAN

    segmented with layer 2 switches？

　　Path determination is based on OSI reference model

    Layer2 information Path determination is based

    on OSI reference model Layer3 information

　　

　　Path determination is based on OSI reference model

    Layer4 information It supports multiple high-speed

    data exchanges

　　

　　 10.What will a Catalyst switch do with

    a multicast （in default configuration）？

　　

　　Learn the correct destinations Flood the multicast

    frames out each port within the VLAN on

    which it is received Query the IGMP designated

    router Query the domain to determine multicast

    group membership

　　

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/8227599/viewspace-934520/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/8227599/viewspace-934520/