The latest 3COM 3M0-311 exam

Product Description

Exam Number/Code: 3M0-331
Exam Name: 3Com WAN Specialist Final Exam v2.0
"3Com Certification ", also known as 3M0-331 exam, is a 3COM certification.
Preparing for the 3M0-331 exam? Searching 3M0-331 Test Questions, 3M0-331 Practice Exam, 3M0-331 Dumps?

With the complete collection of questions and answers, Exam4actual has assembled to take you through 169 Q&A to your 3M0-331 Exam preparation. In the3M0-331 exam resources, you will cover every field and category in 3Com Certification helping to ready you for your successful 3COM Certification.

1.
In V2.x code on a 3Com 5000 or 6000 series router, if the firewall is enabled, which packet is NOT
inspected by default?
A.Nonfragments
B.First fragments
C.Nonfirst
fragments
Correct:C
2.In V2.x code on a 3Com 5000 or 6000 series router, which is NOT provided by Application
Specific Packet Filtering (ASPF)?
A.Java Blocking
B.Site and content blocking
C.Enhanced session logging
D.Support for Port to Application Mapping (PAM)
E.Defense against Denial of Service (DoS) attacks
Correct:B
3.In V2.x code on a 3Com 5000 or 6000 series router with firewall enabled, what happens when
exact packet matching for fragments is enabled?
A.L3 information is recorded for all fragments
B.L3 information is recorded for first fragments
C.NonL3
information is recorded for all fragments
D.NonL3
information is recorded for first fragments
Correct:D
4.Which term does not describe or refer to a frame relay function or parameter?
A.DE
B.CIR
C.DLCI
D.IPCP
E.FECN
Correct:D
5.What OSI layer do routers operate at in the OSI model?
A.Session
B.Network
C.Physical
D.Data Link
E.Transport
F.Application
Correct:B
6.Click the Exhibit button. In the diagram, which additional router command is needed to correctly
configure CHAP?

A.[
RTA] LCP Chap
B.[RTB] Chap enable
C.[RTASerial1/
0/0] ppp chap user RTA
D.[RTBSerial1/
0/0] ppp chap user RTA
E.[RTBSerial1/
0/0] ppp authenticationmode
chap
Correct:C
7.The PPP LCP protocol is associated with which layer of the OSI model?
A.Session
B.Physical
C.Data Link
D.Transport
E.Presentation
Correct:C
8.Which three are characteristics of a router? (Choose three.)
A.Forwards packets between networks
B.Connects only networks of similar types
C.Finds the best path from one network to another network
D.Works at Layer 4, the Transport Layer according to the OSI model
E.Connects networks into physically unified internetworks, with each network retaining its own identity

Correct:
A C E
9.Which four are important considerations when planning a wide area network design? (Choose
four.)
A.Current and planned throughput requirements
B.Proper WAN traffic management to prevent serious congestion
C.Detailed plan for reconfiguring the WAN when expansion is required
D.Disaster recovery plan that facilitates backing up key corporate data
E.Determining if and how backup links will be incorporated into the WAN design
F.What is required to provide customers and partners reasonable access to your Web site
Correct:A B E F
10.Frame relay is associated with which layer of the OSI model?
A.Network
B.Session
C.Physical
D.Data link
E.Transport
Correct:D
11.Which is the default match order used for ACL rules?
A.auto
B.LIFO
C.config
D.longest match
E.determined by ?bits
Correct:C
12.Click the Exhibit button. In the configuration example, which command is needed to complete
the GRE configuration?

A.[
RTA] ike peer RTB
B.[RTB] ike peer RTA
C.[RTA] set mode ip_tunnel
D.[RTB] set mode ip_tunnel
E.[RTATunnel0/
0] destination 1.1.1.1
Correct:E
13.What is the IPSEC security feature that can detect an illegal change to a packet's content
referred to as?
A.3DES
B.Antireplay
C.Data integrity
D.Data confidentiality
E.Data authentication
Correct:C
14.Which three are features of IP Security (IPSec)? (Choose three.)
A.Is a Layer 2 Virtual Private network (VPN) protocol
B.Is a Layer 3 Virtual Private network (VPN) protocol
C.Can transport IP, IPX, AppleTalk and other protocols
D.Supports two security modes: tunneling and transport mode

E.
Requires PointtoPoint
Protocol (PPP) as a transport protocol
F.Consists of three protocols: Authentication Header, Encapsulation Security Payload, and Internet Key
Exchange
Correct:B D F
15.What Class D IP address range is reserved for Multicast packets?
A.224.0.0.0 through 239.0.0.0
B.222.0.0.0 through 224.255.255.255
C.224.0.0.0 through 239.255.255.255
D.224.255.255.255 through 239.255.255.255
Correct:C
16.When there are multiple IGMPenabled
routers connected to an IP subnet, which router will
become the IGMP querier (IGMPdesignated
router)?
A.The router with the lowest Router ID
B.The router with the highest Router ID
C.The router with the lowest IP address
D.The router with the highest IP address
E.The router with the least cost route to the Internet
Correct:C
17.What is a standard way to group users for audio/video applications without overwhelming
network bandwidth?
A.IP Unicasting
B.IP Multicasting
C.IP Broadcasting
D.Link Aggregation
E.Spanning Tree Protocol
Correct:B
18.Which three are characteristics of xDSL technology? (Choose three.)
A.It can transfer data at speeds up to 30 Mbps
B.It converts existing twisted pair telephone lines into highspeed
data paths
C.It simultaneously provides highspeed
data and Plain Old Telephone Service (POTS)
D.It uses the same packet/frame format as Ethernet, which makes it ideal for LAN to WAN access
E.The speed of an xDSL service depends on the thickness of copper wire and the distance from the telco
Central Office (CO)
Correct:B C E
19.What customerpremises
equipment (CPE) always connects to the local loop digital service?
A.Analog modem
B.Permanent Virtual Circuit (PVC)
C.Private Branch Exchange (PBX)
D.Channel Service Unit (CSU)/ Data Service Unit (DSU)
Correct:D
20.Which three are important Router ID considerations when using Open Shortest Path First
(OSPF) routing protocol? (Choose three.)
A.The Router ID must be unique in a network

B.
By default, the Router ID is the first IP address configured on a router
C.The Router ID is a 24bit
address that identifies the router within an OSPF domain
D.The Router ID is a 32bit
address that identifies the router within an OSPF domain
E.The Router ID is always the number ?9?that identifies the routing protocol as OSPF
Correct:A B D
21.Which of the following is not an OSPF packet type?
A.Hello
B.Goodbye
C.Linkstate
request
D.Database description
E.Linkstate
acknowledgment
Correct:B
22.Click the Exhibit button. Referring to the diagram and configuration, which command is needed
to complete the configuration of Router B?

A.[Router BSerial1/
0/0] OSPF area 0
B.[Router Bloopback1]
IP address 2.2.2.2 24
C.[Router Bospf10.0.0.1]
vlinkpeer
3.3.3.3
D.[Router Bospf10.0.0.0]
vlinkpeer
1.1.1.1
E.[Router BEthernet2/
0/0] Ospf networktype
NBMA
Correct:C

23.
Choose three reasons for using Open Shortest Path First (OSPF) routing protocol versus
Routing Information Protocol (RIP) with the Router 5000/6000 series? (Choose three.)
A.When the network has more than 10 routers
B.When hop count is the primary path cost determinate
C.When voice or video multicasting is used extensively on a network
D.When very quick, network convergence is required by the customer
E.When the network employs multiple IP addressing schemes and subnet masks
Correct:A D E
24.How is an ATM connection identified?
A.Local VPI/VCI pair
B.Global VPI/VCI pair
C.Source and destination socket pair
D.Source and destination address pair
Correct:A
25.Which type of Virtual Circuits does the Router 6000 family support?
A.PVCs only
B.SVCs only
C.PVCs and SVCs
Correct:A
26.Which is the correct ATM hierarchy?
A.Physical Paths contain Virtual Channels which contain Virtual Paths
B.Physical Paths contain Virtual Paths which contain Virtual Channels
C.Virtual Paths contain Virtual Channels, which contain Physical Paths
D.Virtual Channels contain Virtual Paths, which contain Physical Paths
Correct:B
27.Which three WAN Multifunction Interface Modules (MIM) is available for the 3Com Router
5232/5642/5682 series? (Choose three.)
A.Oneport,
OC3
MIM
B.Fourport,
ISDN MIM
C.Fourport,
serial MIM
D.Twoport,
E1/CE1/PRI MIM
E.Eightport
enhanced serial MIM
Correct:B C D
28.Which 3COM router supports 64 serial interfaces?
A.4300
B.5012
C.5682
D.6040
E.6080
Correct:E
29.Which two protocols does the Router 5000/6000 series use to exchange network reachability
information with other Internet systems or routers? (Choose two.)
A.IP

B.
IPX
C.ISIS
D.BGP4
E.PPPoE
Correct:C D
30.Which three resiliency features are supported on both the Router 3000 and Router 5000
products? (Choose three.)
A.The router shuts down any WAN interfaces without active traffic
B.Standby ports can provide both backup and loadsharing
capabilities
C.Builtin
Standby Center can provide standby ISDN BRI or ISDN PRI backup
D.When the traffic threshold is reached on all active ports, the standby interface with the lowest priority is
activated
E.When the traffic threshold is reached on all active ports, the standby interface with the highest priority is
activated
Correct:B C E