linux redhat 6.5 多路径配置

|1、查看是否有多路径软件
rpm -qa|grep device-mapper

2、如果没有，安装
device-mapper-multipath
device-mapper
在安装盘的Packages中

#rpm -ivh device-mapper-multipath-libs.*
#rpm -ivh device-mapper-****.rpm
#rpm -ivh device-mapper-multipath-**8.rpm

3、设置开机启动
查看是否开机自启动
chkconfig --list|grep multipathd
设置成开机自启动
chkconfig --level 2345 multipathd on
检查安装是否正常，内核中是否存在
#modprobe -l|grep multipath
kernel/drivers/md/dm-multipath.ko

重启加载内核或手工加载
#modprobe dm-multipath
#modprobe dm-round-robin
#service multipathd start 
 
4、生产multipath配置文件
#/sbin/mapathcnf --enable
#ls /etc/multipath.conf

5、multipath配置文件
默认情况下multipath生成dm设备之后，会同时在/dev/mapper/下生成以磁盘wwid为名的符号链接指向对应的dm设备。如果想生成mpath设备，则需要打开user_friendly_names选项
defaults {
        user_friendly_names yes
}

blacklist {
        devnode "^(ram|raw|loop|fd|md|dm-|sr|scd|st)[0-9]*"
        devnode "^hd[a-z]"
        devnode "^dcssblk[0-9]*"
        device {
                vendor "DGC"
                product "LUNZ"
        }
        device {
                vendor "IBM"
                product "S/390.*"
        }
 device {
                vendor  "ATA"
 }
      device {
                vendor  "3ware"
        }
device {
                vendor  "AMCC"
        }
device {
                vendor  "HPT"
        }
        wwid "3600605b00a9885501d93232c3391b1f1"
        wwid "E0AE835EDFA407A"
        device {
                vendor Raritan
                product Virtual_Disc_1
        }
        wwid "*"
}

 

blacklist_exceptions {
        wwid "36006016066003e000e3d0cd3fc60e511"
        wwid "36006016066003e00db37a2c8fc60e511"
        wwid "36006016066003e00fdee54ddfc60e511"
}

multipaths {
        multipath {
                uid 0
                gid 0
                wwid "36006016066003e000e3d0cd3fc60e511"
                mode 0600
                alias mpathb
        }
        multipath {
                uid 0
                gid 0
                wwid "36006016066003e00db37a2c8fc60e511"
                mode 0600
                alias mpathc
        }
        multipath {
                uid 0
                gid 0
                wwid "36006016066003e00fdee54ddfc60e511"
                mode 0600
                alias mapthd
        }
获取wwid的方法
1、multipath -v3|grep 3600
2、/var/lib/multipth/bindings   但是我没有找到这个文件，可能跟操作系统版本有关。

multipath -ll查看多路径
service multipathd restart
multipath -F重新定义别名后删除不用的路径
multipath -v2 重新扫描
 

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/29820633/viewspace-1808332/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/29820633/viewspace-1808332/