oracle重建控制文件

最新推荐文章于 2022-08-04 14:25:37 发布

congti5481

最新推荐文章于 2022-08-04 14:25:37 发布

阅读量115

点赞数

PURPOSE
This article describes how you can recreate your controlfile.

SCOPE & APPLICATION
For DBAs who need to recreate the controlfile.

WARNING:
--------

You should only need to recreate your control file under very special
circumstances:

- All current copies of the control file have been lost or are corrupted.

- You need to change a "hard" database parameter that was set when the
database was first created, such as MAXDATAFILES, MAXLOGFILES,
MAXLOGHISTORY, etc.

- You are restoring a backup in which the control file is corrupted or
missing.

- Oracle Customer Support advises you to do so.

- If you are moving your database to another machine which is
running the same operating system but the location of the datafiles,
logfiles is not the same.

Instructions:
=============

I. CREATING A NEW CONTROL FILE FROM THE EXISTING CONTROL FILE:
--------------------------------------------------------------

1. If you are running Oracle7 or higher you can get Oracle to generate
    a script. for you that enables you to recreate the controlfile. Run the
    following command while the database is mounted or open and connected
    as a user with DBA privileges:

       % svrmgrl
       SVRMGR> connect internal
       SVRMGR> startup mount
       SVRMGR> alter database backup controlfile to trace;

   Oracle6 does not have this feature and therefore you will need to build
   the CREATE CONTROLFILE statement yourself. The syntax is discussed in
   detail in the Oracle SQL Reference Guide.

2. The trace file will be stored in the USER_DUMP_DEST destination,
   which is set to "$ORACLE_HOME/rdbms/log" by default on Unix platforms.

   To find out what USER_DUMP_DEST is set to, follow one of the following:

   a) Look in the parameter file (init.ora on UNIX and Windows NT,
      __init.ora on VMS) for the parameter:

       USER_DUMP_DEST = d:/oradata/orcl/trce/udump

   b) Using SQL*PLus you can issue the following command:

      SQL> SELECT   value
        2> FROM     v$parameter
        3> WHERE    name = 'user_dump_dest';

      VALUE
      ------------------------------------------------
      d:/oradata/orcl/trace/udump

   c) Using Server Manager you can issue the following command:

       SVRMGR> show parameter
       SVRMGR> show parameter user_dump_dest;

   The easiest way to locate the correct trace is to look at its date.
   A file will exist with the current date and time. The naming
   convention for these files is operating system specific.

   Example:
   --------

   % cd $ORACLE_HOME/rdbms/log
   % ls -l
   -rw-r--r--   1 osupport dba 2315 Oct 3 16:39 alert_p716.log
   -rw-r--r--   1 osupport dba 1827 Oct3 16:39 p716_ora_26220.trc

   In this example, the file "p716_ora_26220.trc" is the trace file
   produced that contains a script. to create the control file.

3. Modify the trace file and use it as a script. to create the control
   file. Copy the trace file to a script. file, such as "new_control.sql",
   delete the header information prior to the words STARTUP NOMOUNT,
   and make any other desired changes, such as increasing MAXDATAFILES,
   MAXLOGFILES, etc.

   Sample:
   -------------------------- -----------------------------
   Dump file /u01/oracle/7.1.6/rdbms/log/p716_ora_26220.trc
   Oracle7 Server Release 7.1.6.2.0 - Production Release
   With the distributed and replication options
   PL/SQL Release 2.1.6.2.0 - Production
   ORACLE_HOME = /u01/oracle/7.1.6
   ORACLE_SID = p716
   Oracle process number: 9         Unix process id: 26220
   System name:    SunOS
   Node name:      tcsun2
   Release:        5.4
   Version:        Generic_101945-27
   Machine:   sun4m

   Tue Oct 3 16:39:13 1995
   *** SESSION ID:(6.61)
   # The following commands will create a new control file and use it
   # to open the database.
   # No data other than log history will be lost. Additional logs may
   # be required for media recovery of offline data files. Use this
   # only if the current version of all online logs are available.
   STARTUP NOMOUNT

   CREATE CONTROLFILE REUSE DATABASE "P716" NORESETLOGS NOARCHIVELOG
       MAXLOGFILES 32
       MAXLOGMEMBERS 2
       MAXDATAFILES 30
       MAXINSTANCES 8
       MAXLOGHISTORY 800
   LOGFILE
     GROUP 1 '/u01/oracle/7.1.6/dbs/log1p716.dbf' SIZE 500K,
     GROUP 2 '/u01/oracle/7.1.6/dbs/log2p716.dbf' SIZE 500K,
     GROUP 3 '/u01/oracle/7.1.6/dbs/log3p716.dbf' SIZE 500K
   DATAFILE
     '/u01/oracle/7.1.6/dbs/systp716.dbf' SIZE 40M,
     '/u01/oracle/7.1.6/dbs/tempp716.dbf' SIZE 550K,
     '/u01/oracle/7.1.6/dbs/toolp716.dbf' SIZE 15M
   ;
   # Recovery is required if any of the datafiles are restored backups,
   # or if the last shutdown was not normal or immediate.
   RECOVER DATABASE
   # Database can now be opened normally.
   ALTER DATABASE OPEN;

   ---------------------- ----------------------------------


4. Shutdown the database (NORMAL, IMMEDIATE, TRANSACTIONAL (Oracle8 only)
   but not ABORT).

       SVRMGR> shutdown immediate

5. Take a full database backup.

6. Rename/move the existing database controlfiles to a backup (The REUSE
   option will overwrite the original files). The size of the controlfile
   will be increased    by increasing the value of    MAXDATAFILES,
   MAXLOGMEMBERS, etc.

   Example:
   --------

   % cd $ORACLE_HOME/dbs
   % mv ctrlV716.ctl ctrlV716.bak

7. Create the controlfile within Server Manager

SVRMGR> connect internal
SVRMGR> @new_control.sql

   If you get the "Statement processed" message, the database will
   be opened with a brand new control file.

8. At the first opportunity, shut the database down (normal, immediate or
   transactional oracle8 only) and take a full backup.


II. CREATING A NEW CONTROL FILE WITHOUT AN EXISTING CONTROL FILE:
-----------------------------------------------------------------

CREATE CONTROLFILE SYNTAX:
The following is information on the create control file syntax. This
information is fully documented in the Oracle7 SQL Reference Manual.

CREATE CONTROLFILE [REUSE]
   DATABASE name
   [LOGFILE filespec [, filespec] ...]
    RESETLOGS | NORESETLOGS
   [MAXLOGFILES integer]
   [DATAFILE filespec [, filespec] ...]
   [MAXDATAFILES integer]
   [MAXINSTANCES integer]
   [ARCHIVELOG | NOARCHIVELOG]
   [SHARED | EXCLUSIVE]

The complete procedure follows:

1. Take a full backup of the database, including all datafiles and redo
   log files.

2. Go into SQL*DBA or Server Manager and do a STARTUP NOMOUNT.

3. Issue the CREATE CONTROLFILE statement.

   Example:
   --------

       CREATE CONTROLFILE REUSE DATABASE "P716" NORESETLOGS NOARCHIVELOG
       MAXLOGFILES 50
       MAXLOGMEMBERS 3
       MAXDATAFILES 300
       MAXINSTANCES 8
       MAXLOGHISTORY 500
       LOGFILE
               GROUP 1 '/u01/oracle/7.1.6/dbs/log1p716.dbf' SIZE 1M,
               GROUP 2 '/u01/oracle/7.1.6/dbs/log2p716.dbf' SIZE 1M,
               GROUP 3 '/u01/oracle/7.1.6/dbs/log3p716.dbf' SIZE 1M
       DATAFILE
               '/u01/oracle/7.1.6/dbs/systp716.dbf' SIZE 40M,
               '/u01/oracle/7.1.6/dbs/tempp716.dbf' SIZE 1M,
               '/u01/oracle/7.1.6/dbs/toolp716.dbf' SIZE 15M ;

4. Perform. media recovery on the database.

       SVRMGR> recover database;

5. Open the database.

       SVRMGR> alter database open;

6. At the first opportunity, shut the database down and take a full cold
   backup.

Additional Errors:
------------------
ORA-205 ORA-7360 ORA-376 ORA-1110 ORA-1111