setterm

setterm -blank 0    ---屏幕一直亮?

setterm -blength 0 ---设置报警音报警时间，0表示没有报警音

setterm -bfreq 10 ---设置报警音的频率（Hz）

 

Usage:
 setterm [options]

Options:
 -term <terminal_name>
 -reset
 -initialize
 -cursor <on|off>
 -repeat <on|off>
 -appcursorkeys <on|off>
 -linewrap <on|off>
 -default
 -foreground <default|black|blue|cyan|green|magenta|red|white|yellow>
 -background <default|black|blue|cyan|green|magenta|red|white|yellow>
 -ulcolor <black|blue|bright|cyan|green|grey|magenta|red|white|yellow>
 -ulcolor <black|blue|bright|cyan|green|grey|magenta|red|white|yellow>
 -hbcolor <black|blue|bright|cyan|green|grey|magenta|red|white|yellow>
 -hbcolor <black|blue|bright|cyan|green|grey|magenta|red|white|yellow>
 -inversescreen <on|off>
 -bold <on|off>
 -half-bright <on|off>
 -blink <on|off>
 -reverse <on|off>
 -underline <on|off>
 -store
 -clear <all|rest>
 -tabs <tab1 tab2 tab3 ...>      (tabn = 1-160)
 -clrtabs <tab1 tab2 tab3 ...>   (tabn = 1-160)
 -regtabs <1-160>
 -blank <0-60|force|poke>
 -dump   <1-NR_CONSOLES>
 -append <1-NR_CONSOLES>
 -file dumpfilename
 -msg <on|off>
 -msglevel <0-8>
 -powersave <on|vsync|hsync|powerdown|off>
 -powerdown <0-60>
 -blength <0-2000>
 -bfreq freqnumber
 -version