This car may also not understand, it is Jiangling's a hardcore off-road SUV, with many from Ford's advanced technology, such as the engine of this power core. At the same time, its beam and Ford shook the same, is one of the production from the production. So, Yu-sheng S350 is definitely a leather and durable hardcore off-road vehicles. But because of the car's original car shock, performance is not too good, so the owner began to modify the car's shock. The first step, we have to choose the appropriate shock absorber replacement. The owner of the choice is that a professional brand for the Yu-sheng S350 design and production of 2-inch set of shock absorbers, the price is very cheap, but also the corresponding warranty. So, the owner to choose this set of shock absorbers, after the goods looked at the blue dust cover is very thick, very reliable workmanship. The second step, find a modified shop to open the car on the shelf, began to officially replace the shock. First, to remove the four wheels, and then one by one demolition shock absorber fit
200SX Coilovers. Because the owner to buy the Yu wins S350 is a four-wheel drive type, so when the demolition of the shock absorber, be very careful not to let the inside of the axle spline out. If you do not pay attention, it is likely to cause damage to the axle. The third step, take the demolition of the original car shock absorber and the new shock absorber contrast. The new shock absorber is indeed a lot more than the original car, but also higher than 2 inches, after the installation of the cross-country when the performance will be stronger. The fourth step, the original car damping the top of the buffer pads removed, loaded into the new shock above. If this step to forget the words, the new shocks fit
240sx Coilovers installed after the drive when there will be a clear abnormal sound issued. The fifth step, began to install the shock absorber, in the new shock absorber on a ring need to be removed, its role is used to compress the shock absorber. Do not remove the words, the shock is not open can not be installed. At the same time, the new shock absorbers need to adjust the damping, we can choose to twist to the extent they want. Finally, after the shock is installed, check the new cushioning and there is no friction between the suspension fit
S13 Coilovers for Sale parts of the original car. To determine no problem, the four tires are installed, followed by four rounds of positioning. This is because after the shock replacement, the vehicle's forward and camber angle data will change, so you must do four rounds of positioning to adjust the vehicle data.
来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/30200434/viewspace-2136818/,如需转载,请注明出处,否则将追究法律责任。
转载于:http://blog.itpub.net/30200434/viewspace-2136818/