CentOs网络重启问题：Bringing up interface eth0: Device eth0 does not seem to be presen

造成这一现象的多数是发生在虚拟机拷贝过程中造成的，现象如下：

service network restart
Shutting down loopback insterface:                                                                                                     [  OK  ]
Bringing up loopback insterface:                                                                                                          [  OK  ]
Bringing up interface eth0:  Device eth0 does not seem to be present,delaying initialization.                    [FAILED]

解决方案如下：

第一：打开/etc/udev/rules.d/70-persistent-net.rules内容如下面例子所示：

# vi /etc/udev/rules.d/70-persistent-net.rules

# This file was automatically generated by the /lib/udev/write_net_rules

# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:50:bd:17", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"

记录mac地址：00:0c:29:50:bd:17

第二： 编辑 /etc/sysconfig/network-scripts/ifcfg-ech0

vi  /etc/sysconfig/network-scripts/ifcfg-ech0

将 DEVICE="eth0"  改成  DEVICE="eth1"  ,
将 HWADDR="00:0c:29:8f:89:97" 改成上面的mac地址  HWADDR="00:0c:29:50:bd:17"

第三：重启网络服务

# service network restart
或者

# /etc/init.d/network restart

第四：

ok。