EMC 重新注册license

问题如下
Pseudo name=emcpowera
VNX ID=FCN00114900102 [file]
Logical device ID=6006016045D02E0030CEA5DC4FAEE311 [file]
state=alive; policy=BasicFailover; queued-IOs=0
Owner: default=SP A, current=SP A       Array failover mode: 4
==============================================================================
--------------- Host ---------------   - Stor -  -- I/O Path --   -- Stats ---
###  HW Path               I/O Paths    Interf.  Mode     State   Q-IOs Errors
==============================================================================
   8 qla2xxx                sdn         SP B1    unlic    alive      0      0
   7 qla2xxx                sdj         SP B5    active   alive      0      0
   8 qla2xxx                sdf         SP A1    unlic    alive      0      0
   7 qla2xxx                sdb         SP A5    active   alive      0      0

问题原因：以上为单链路通，主要原因是没有注册license，也就是没有授权，没有授权的情况下，只能使用单链路而且不支持负载均衡和故障转移。用于商业的生产库必须注册license噢！

解决办法
emcpreg -install
[root@ImageApp1 ~]# emcpreg -install

===========   EMC PowerPath Registration ===========
Do you have a new registration key or keys to enter?[n] yes
                  Enter the registration keys(s) for your product(s),
                  one per line, pressing Enter after each key.
                  After typing all keys, press Enter again.

Key (Enter if done): keys-keys-keys-keys-keys-keys
1 key(s) successfully added.
Key successfully installed.

[root@doudou ~]# powermt set policy=co

[root@doudou ~]# powermt display dev=all
Pseudo name=emcpowera
VNX ID=FCN00114900102 [file]
Logical device ID=6006016045D02E0030CEA5DC4FAEE311 [file]
state=alive; policy=CLAROpt; queued-IOs=0
Owner: default=SP A, current=SP A       Array failover mode: 4
==============================================================================
--------------- Host ---------------   - Stor -  -- I/O Path --   -- Stats ---
###  HW Path               I/O Paths    Interf.  Mode     State   Q-IOs Errors
==============================================================================
   8 qla2xxx                sdn         SP B1    active   alive      0      0
   7 qla2xxx                sdj         SP B5    active   alive      0      0
   8 qla2xxx                sdf         SP A1    active   alive      0      0
   7 qla2xxx                sdb         SP A5    active   alive      0      0

 

 

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/26442936/viewspace-1156532/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/26442936/viewspace-1156532/