Host (Compute)
1. Memory Virtualization= It creates virtual memory with an address space larger than the physical memory space
virtual memory manager(VMM). The VMM manages thevirtual-to-physical memory mapping
A process known aspagingmoves inactive physical memory pages onto the swap file and brings them back to the physical memory when required.
moves the least used pages into the swap file so that enough RAM is available for processes that are more active
2. Device Driver= software that permits the operating system to interact with a specific device, such as a printer, a mouse, or a disk drive.
3. Volume Manager =
In the early days, disk drives appeared to the OS as a number of continuous disk blocks.
no easy way to scale in or out of the file system’s size.
Logical Volume Managers(LVM) = layer between the file system and the physical disk. partition large disk or aggregate small disks
The basic LVM components arephysical volumes, volume groups, and logical volumes.
logical volume can be thought of as adisk partition, whereas the volume group itself can bethought of as adisk.
logical volume is made up of noncontiguous physical extents and mayspan multiple physical volumes.
4. File System
A fileis a collection of related records or data stored as a unit with a name.
A file systemis a hierarchical structure of files.
directories, are containers for storing pointers to multiple files.
the metadata in a UNIX environment consists of thesuperblock, theinodes, and the list ofdata blocks free and in use.
inode is associated with every file and directory and contains information such as thefile length, ownership, access privileges, time of last access/modification,number of links, and the address of the data.
Each file system blockis a contiguous area on the physical disk. The block size of a file system isfixed at the time of its creation.
A file can span multiple file system blocks.
Non journaling file systemscause a potential loss of files because they use separate writes to update their data and metadata.
system crashes during the write process, the metadata or data might be lost or corrupted.
system reboots, the file system attempts to update the metadata structures by examining and repairing them.
A journaling file systemuses a separate area called alog orjournal.
enough information in the log to “replay” the log record and complete the operation.
quick file system check because it looks only at the active, most recently accessed parts of a large filesystem.
5. Compute Virtualization
It enables multiple operating systems to run concurrently on single or clustered physical machines.
achieved by a virtualization layer that resides between thehardware and virtual machines. This layer is also called thehypervisor.
Connectivity
1. Physical Components of Connectivity
A host interface deviceor host adapter connects a host to otherhosts and storage devices. Examples of host interface devices are host bus adapter (HBA) and network interface card (NIC). Host bus adaptoris anapplication-specific integrated circuit(ASIC) board that performs I/O interface functions between the host and storage, relieving the CPU from additional I/O processing workload. A host typically contains multiple HBAs.
2. Interface Protocols
between the host and storage.
The popular interface protocols used for host to storage communications areIntegrated Device Electronics/Advanced Technology Attachment(IDE/ATA),Small Computer System Interface(SCSI),Fibre Channel(FC) andInternet Protocol (IP).
SCSI supports up to16 devices on a single bus and provides data transfer rates up to 640 MB/s (for the Ultra-640 version).
Serial attached SCSI (SAS) is a point-to-point serial protocol (6 Gb/s )
These protocols are implemented on the disk interface controllers. therefore, disk drivesare known by the protocol interface they support, for example SATA disk, FCdisk, and so on.
Disk Drive Performance
Zoned bit recordinguses the disk efficiently.
On older disk drives, the outer tracks had the same number of sectors as the inner tracks, so data density was low on the outer tracks. This was an inefficient use of the available space, as shown in Figure 2-9 (a).
Earlier drives used physical addresses consisting of thecylinder, head,and sector(CHS) number to refer to specific locations on the disk,
Logical block addressing(LBA)
simplifies addressing by using alinear address to access physical blocks of data. The disk controller translates LBA to a CHSaddress, and the host needs to know only the size of the disk drive in terms of the number of blocks. The logical blocks are mapped to physical sectors on a 1:1 basis.
Seek Time =
Full Stroke:The time taken by the R/W head to move across the entire width of the disk, from theinnermost track to the outermost track.
Average:The average time taken by the R/W head to move fromone random track to another, normally listed as the time for one-third of a full stroke.
Track-to-Track:The time taken by the R/W head to movebetween adjacent tracks.
Rotational Latency = the time needed to find the sector in one track, average travelling half round of the track
Average rotational latency for a 15,000 rpm (or 250 rps)drive = 0.5/250 = 2 milliseconds.
Disk I/O Controller Utilization
Average response time (TR) = Service time (TS) / (1 – Utilization)
TSis the time taken by the controller to serve an I/O.
The graph indicates that the response time changes arenonlinear as the utilization increases. When the average queue sizes are low, the response time remains low. The response time increases slowly with added load on the queue and increases exponentially when the utilization exceeds 70 percent.
252
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
