ATOS Professional - 3D Scanning and Inspection Software



ATOS Professional - 3D Scanning and InspectionSoftware

www.crcsafe.com

QQ:503904000

ATOS GOM Inspect Professional V8

ATOS GOM PONTOS Live V8

ATOS GOM Kiosk Interface V8

ATOS Professional V8

TRITOP Professional V8

VIDI深度学习图像处理软件2.0.9

cognex vidi深度学习图像处理软件2.1

EVT EyeVision 3.5

halcon13开发/运行版

Cognex Designer 2.0 视觉软件

VisionPro 9.1 X32/X64

SAL3D Match3D

http://www.gom.com/fileadmin/user_upload/software/atos-professional-01.png

ATOS Professional is a process-reliable softwaresolution that controls ATOS 3D scanners, produces precise 3D surface data, andoffers complete inspection and reporting functionalities in one softwarepackage.

The software includes all GOM Inspect Professional functionalities, making ATOS Professional a complete parametric andtraceable measuring and evaluation software for dimensional analyses.

Certified Inspection Software

To ensure precise measuring accuracy, the GOMsoftware packages have been tested and certified by the two institutes PTB andNIST. The accuracy of the inspection software is confirmed by the comparison ofthe results obtained with the reference results. The GOM software has beenplaced in Category 1, the category with the smallest measurement deviations.

SoftwareHighlights

http://www.gom.com/fileadmin/user_upload/software/gom_atos-professional_actual-nominal-comparsion.jpg 

Actual-nominal comparison

The calculated polygon mesh describes free-formsurfaces and standard geometries. These can be compared with the drawing ordirectly with the CAD data set with the help of a surface comparison. A 3Danalysis of surfaces as well as a 2D analysis of sections or points can beimplemented in the software. CAD-based generation of standard geometries suchas lines, planes, circles or cylinders is also possible.

Alignment

http://www.gom.com/fileadmin/user_upload/software/gom_atos-professional_alignment.jpgThe GOM 3D softwarecontains all standard alignment functions. These include RPS alignment,hierarchical alignment based on geometric elements, alignment in a localcoordinate system, using reference points as well as various best-fit methodssuch as global best-fit and local best-fit. Customers can also use their ownspecific alignments, e. g. for turbine blades, such as balanced beam orequalized nested.

Curve-Based Inspection

http://www.gom.com/fileadmin/user_upload/software/atos-professional_curve-based-inspection.jpgOn the basis offull-field digitalized data, construction functions can be applied for curvesand their characteristics can be visualized. Edge curves can, for example, berecorded, radii and design lines can be analyzed and spline curves can becreated. Curve-based inspection is also used to evaluate gap and flush.

Trend, SPC and Deformation Analysis

The parameter-based approach of the GOM softwareenables trend analysis for multiple evaluation, e. g. for statistical processcontrol (SPC) or deformation analysis. As a result, several parts or stageswithin a single project can be evaluated in a full-field manner, andstatistical analysis values such as Cp, Cpk, Pp, Ppk, Min, Max, Avg and Sigmacan be determined. http://www.gom.com/fileadmin/user_upload/software/gom_atos-professional_trend-spc-deformation-analysis.jpg

GD&T Analysis

http://www.gom.com/fileadmin/user_upload/software/gom_atos-professional_gd_t-analysis.jpgIn contrast to thepure dimension analysis, the GD&T analysis focuses on the functional aspectof the part. Corresponding GD&T elements are, for example, planarity,parallelism or cylindricity. Both, a standardized analysis of 2-point distancesand of the maximum material requirement as well as the position tolerance inlocal datum and coordinate systems are possible.

Airfoil Inspection

http://www.gom.com/fileadmin/user_upload/software/atos-professional_airfoil-inspection.jpgSpecial functionsare available for the quality control of turbine blades, which can be used, forexample, to inspect the profile mean line, profile chord line or profilethickness of turbine blades on the basis of 2D sections. The profile centroid,profile radii and profile twists can also be calculated.

Reporting

The reporting module enables users to create reportscontaining snapshots, images, tables, diagrams, texts and graphics. The resultscan be visualized and edited in the user interface as well as exported as a PDFfile. Templates are reusable, and each scene saved in a report can be restoredin the 3D window.

http://www.gom.com/fileadmin/user_upload/software/gom_atos-professional_reporting.jpg

Related 3DSoftware and Metrology Systems:

Virtual Measuring Room (VMR)

GOM offers anadditional VMR software module built on the GOM Inspect and ATOS Professionalsoftware. The VMR is the central control station and measurement planningsoftware for all elements of the ATOS measuring cells. It fully integrates thecomplete reproduction of automated measurement process chains within one singlesoftware package.
more...

ATOS

http://www.gom.com/uploads/tx_liteasercontent/atos_teaser_05.jpgThe ATOS series of industrial optical 3D scanners provide accurate scanswith detailed resolution at high speeds. ATOS delivers three-dimensionalmeasurement data and analysis for industrial components such as sheet metalparts, tools and dies, turbine blades, prototypes, injection molded parts,castings, and more. 
more...

ATOS ScanBox - Optical 3DMeasuring Machine

http://www.gom.com/uploads/tx_liteasercontent/atos-scanbox_teaser.jpgThe ATOS ScanBox is a complete optical 3D measuring machine that wasdeveloped by GOM for an efficient quality control in the production andmanufacturing process. Nine models are available for different part sizes andapplications.

 

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值