oracle中trigger的使用

理论知识：

Basic Trigger Syntax
Below is the syntax for creating a trigger in Oracle (which differs slightly from standard SQL syntax):
CREATE [OR REPLACE] TRIGGER

{BEFORE|AFTER} {INSERT|DELETE|UPDATE} ON

[REFERENCING [NEW AS ] [OLD AS ]]

[FOR EACH ROW [WHEN ()]]

Some important points to note:
You can create only BEFORE and AFTER triggers for tables. (INSTEAD OF triggers are only available for views; typically they are used to implement view updates.)
You may specify up to three triggering events using the keyword OR. Furthermore, UPDATE can be optionally followed by the keyword OF and a list of attribute(s) in . If present, the OF clause defines the event to be only an update of the attribute(s) listed after OF. Here are some examples:
... INSERT ON R ...

... INSERT OR DELETE OR UPDATE ON R ...

... UPDATE OF A, B OR INSERT ON R ...
If FOR EACH ROW option is specified, the trigger is row-level; otherwise, the trigger is statement-level.
Only for row-level triggers:
The special variables NEW and OLD are available to refer to new and old tuples respectively. Note: In the trigger body, NEW and OLD must be preceded by a colon (":"), but in the WHEN clause, they do not have a preceding colon! See example below.
The REFERENCING clause can be used to assign aliases to the variables NEW and OLD.
A trigger restriction can be specified in the WHEN clause, enclosed by parentheses. The trigger restriction is a SQL condition that must be satisfied in order for Oracle to fire the trigger. This condition cannot contain subqueries. Without the WHEN clause, the trigger is fired for each row.
is a PL/SQL block, rather than sequence of SQL statements. Oracle has placed certain restrictions on what you can do in , in order to avoid situations where one trigger performs an action that triggers a second trigger, which then triggers a third, and so on, which could potentially create an infinite loop. The restrictions on include:
You cannot modify the same relation whose modification is the event triggering the trigger.
You cannot modify a relation connected to the triggering relation by another constraint such as a foreign-key constraint.

--------------------------------------------------------------------------
Trigger Example
We illustrate Oracle's syntax for creating a trigger through an example based on the following two tables:
CREATE TABLE T4 (a INTEGER, b CHAR(10));

CREATE TABLE T5 (c CHAR(10), d INTEGER);
We create a trigger that may insert a tuple into T5 when a tuple is inserted into T4. Specifically, the trigger checks whether the new tuple has a first component 10 or less, and if so inserts the reverse tuple into T5:
CREATE TRIGGER trig1
AFTER INSERT ON T4
REFERENCING NEW AS newRow
FOR EACH ROW
WHEN (newRow.a <= 10)
BEGIN
INSERT INTO T5 VALUES(:newRow.b, :newRow.a);
END trig1;
.
run;
Notice that we end the CREATE TRIGGER statement with a dot and run, as for all PL/SQL statements in general. Running the CREATE TRIGGER statement only creates the trigger; it does not execute the trigger. Only a triggering event, such as an insertion into T4 in this example, causes the trigger to execute.

--------------------------------------------------------------------------
Displaying Trigger Definition Errors
As for PL/SQL procedures, if you get a message
Warning: Trigger created with compilation errors.
you can see the error messages by typing
show errors trigger ;
Alternatively, you can type, SHO ERR (short for SHOW ERRORS) to see the most recent compilation error. Note that the reported line numbers where the errors occur are not accurate.

--------------------------------------------------------------------------
Viewing Defined Triggers
To view a list of all defined triggers, use:
select trigger_name from user_triggers;

For more details on a particular trigger:

select trigger_type, triggering_event, table_name, referencing_names, trigger_body
from user_triggers
where trigger_name = '';

--------------------------------------------------------------------------
Dropping Triggers
To drop a trigger:
drop trigger ;

--------------------------------------------------------------------------
Disabling Triggers
To disable or enable a trigger:
alter trigger {disable|enable};

--------------------------------------------------------------------------
Aborting Triggers with Error
Triggers can often be used to enforce contraints. The WHEN clause or body of the trigger can check for the violation of certain conditions and signal an error accordingly using the Oracle built-in function RAISE_APPLICATION_ERROR. The action that activated the trigger (insert, update, or delete) would be aborted. For example, the following trigger enforces the constraint Person.age >= 0:
create table Person (age int);

CREATE TRIGGER PersonCheckAge
AFTER INSERT OR UPDATE OF age ON Person
FOR EACH ROW
BEGIN
IF (:new.age < 0) THEN
RAISE_APPLICATION_ERROR(-20000, 'no negative age allowed');
END IF;
END;
.
RUN;

If we attempted to execute the insertion:

insert into Person values (-3);

we would get the error message:

ERROR at line 1:
ORA-20000: no negative age allowed
ORA-06512: at "MYNAME.PERSONCHECKAGE", line 3
ORA-04088: error during execution of trigger 'MYNAME.PERSONCHECKAGE'

and nothing would be inserted. In general, the effects of both the trigger and the triggering statement are rolled back.

--------------------------------------------------------------------------
Mutating Table Errors
Sometimes you may find that Oracle reports a "mutating table error" when your trigger executes. This happens when the trigger is querying or modifying a "mutating table", which is either the table whose modification activated the trigger, or a table that might need to be updated because of a foreign key constraint with a CASCADE policy. To avoid mutating table errors:
A row-level trigger must not query or modify a mutating table. (Of course, NEW and OLD still can be accessed by the trigger.)
A statement-level trigger must not query or modify a mutating table if the trigger is fired as the result of a CASCADE delete.

--------------------------------------------------------------------------
例子1
create or replace trigger TR_AAI01
before delete or update or insert on AAI01
for each row

declare
-- local variables here
number_seq number;
number_rowid number;
begin
if updating then
select seq_tradenum.nextval into number_seq from dual;
:new.EBZ008 :=number_seq;
end if;
if deleting then
insert into EBZ08(EBZ027,AAC000,EBZ008,EBZ009) values ('AAI01',:old.AAI000,:old.EBZ008,:old.EBZ009);
end if;
if inserting then
select seq_rowid.nextval into number_rowid from dual;
select seq_tradenum.nextval into number_seq from dual;
:new.EBZ008 :=number_seq;
:new.EBZ009 := to_char(number_rowid);
end if;
end TR_AAI01;

那么如何截获触发触发起的sql语句呢？itpub上 ryuxy 是这样处理的（原文http://www.itpub.net/701184.html）。
CREATE OR REPLACE TRIGGER TRG_LOG_SQL
BEFORE INSERT
ON MYTABLE
DECLARE
n NUMBER;
stmt varchar2(4000);
sql_text ora_name_list_t;
BEGIN
n := ora_sql_txt(sql_text);
FOR i IN 1..n LOOP
stmt := stmt || sql_text(i);
END LOOP;

INSERT INTO DDL_LOG(DDL_TIME, DDL_USER, DDL_HOST, DDL_IP, DDL_SQL)
VALUES(SYSDATE,USER,SYS_CONTEXT('USERENV','HOST'), SYS_CONTEXT('USERENV','IP_ADDRESS'),stmt);

EXCEPTION
WHEN OTHERS THEN
RAISE;-- Consider logging the error and then re-raise
END ;

[@more@]

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/7659204/viewspace-897731/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/7659204/viewspace-897731/