第1章 算数运算
1.1加法:+
语法:A + B
操作类型:所有数值类型
说明: 返回A与B相加的结果。结果的数值类型等于A的类型和B的类型的最小父类型(详见数据类型的继承关系)。比如,int + int 一般结果为int类型,而 int + double 一般结果为double类型
hive> select 1 + 9 from iteblog;
10
hive> create table iteblog as select 1 + 1.2 from iteblog;
hive> describe iteblog;
_c0 double
1.2减法:-
语法:A - B
操作类型:所有数值类型
说明: 返回A与B相减的结果。结果的数值类型等于A的类型和B的类型的最小父类型(详见数据类型的继承关系)。比如,int – int 一般结果为int类型,而 int – double 一般结果为double类型
hive> select 10 – 5from iteblog;
5
hive> create table iteblog as select 5.6 – 4 from iteblog;
hive> describe iteblog;
_c0 double
1.3乘法:*
语法:A * B
操作类型:所有数值类型
说明: 返回A与B相乘的结果。结果的数值类型等于A的类型和B的类型的最小父类型(详见数据类型的继承关系)。注意,如果A乘以B的结果超过默认结果类型的数值范围,则需要通过cast将结果转换成范围更大的数值类型
hive> select 40 * 5 from iteblog;
200
1.4除法:/
语法:A / B
操作类型:所有数值类型
说明: 返回A除以B的结果。结果的数值类型为double
hive> select 40 / 5 from iteblog;
8.0
1
2
注意:hive中最高精度的数据类型是double,只精确到小数点后16位,在做除法运算的时候要特别注意
hive>select ceil(28.0/6.999999999999999999999) from itebloglimit 1;
结果为4
hive>select ceil(28.0/6.99999999999999) from iteblog limit1;
结果为5
1.5取余:%
语法:A % B
操作类型:所有数值类型
说明: 返回A除以B的余数。结果的数值类型等于A的类型和B的类型的最小父类型(详见数据类型的继承关系)。
hive> select 41 % 5 from iteblog;
1
hive> select 8.4 % 4 from iteblog;
0.40000000000000036
注意:精度在hive中是个很大的问题,类似这样的操作最好通过round指定精度
hive> select round(8.4 % 4 , 2) from iteblog;
0.4
1.6位与:&
语法:A & B
操作类型:所有数值类型
说明:返回A和B按位进行与操作的结果。结果的数值类型等于A的类型和B的类型的最小父类型(详见数据类型的继承关系)。
hive> select 4 & 8 from iteblog;0
hive> select 6 & 4 from iteblog;4
1.7位或:|
语法:A | B
操作类型:所有数值类型
说明: 返回A和B按位进行或操作的结果。结果的数值类型等于A的类型和B的类型的最小父类型(详见数据类型的继承关系)。
hive> select 4 | 8 from iteblog;
12
hive> select 6 | 8 from iteblog;
14
1.8位异或:^
语法:A ^ B
操作类型:所有数值类型
说明: 返回A和B按位进行异或操作的结果。结果的数值类型等于A的类型和B的类型的最小父类型(详见数据类型的继承关系)。
hive> select 4 ^ 8 from iteblog;
12
hive> select 6 ^ 4 from iteblog;
2
1.9位取反:~
语法:~A
操作类型:所有数值类型
说明: 返回A按位取反操作的结果。结果的数值类型等于A的类型。
hive> select ~6 from iteblog;
-7
hive> select ~4 from iteblog;
-5
第2章 关系运算
2.1等值比较:=
语法:A=B
操作类型:所有基本类型
说明: 如果表达式A与表达式B相等,则为TRUE;否则为FALSE
hive> select 1 from iteblog where 1=1;
1
2.2不等值比较:<>
语法: A <> B
操作类型: 所有基本类型
说明: 如果表达式A为NULL,或者表达式B为NULL,返回NULL;如果表达式A与表达式B不相等,则为TRUE;否则为FALSE
hive> select 1 from iteblog where 1<> 2;
1
2.3小于比较:<
语法: A < B
操作类型:所有基本类型
说明: 如果表达式A为NULL,或者表达式B为NULL,返回NULL;如果表达式A小于表达式B,则为TRUE;否则为FALSE
hive> select 1 from iteblog where 1< 2;
1
2.4小于等于比较:<=
语法: A <= B
操作类型: 所有基本类型
说明: 如果表达式A为NULL,或者表达式B为NULL,返回NULL;如果表达式A小于或者等于表达式B,则为TRUE;否则为FALSE
hive> select 1 from iteblog where 1< = 1;
1
2.5大于比较:>
语法: A > B
操作类型: 所有基本类型
说明: 如果表达式A为NULL,或者表达式B为NULL,返回NULL;如果表达式A大于表达式B,则为TRUE;否则为FALSE
hive> select 1 from iteblog where 2 > 1; 1 |
2.6大于等于比较:>=
语法: A >= B
操作类型: 所有基本类型
说明: 如果表达式A为NULL,或者表达式B为NULL,返回NULL;如果表达式A大于或者等于表达式B,则为TRUE;否则为FALSE
hive> select 1 from iteblog where 1 >= 1; 1 |
注意:String的比较要注意(常用的时间比较可以先 to_date 之后再比较)
hive> select * from iteblog; OK 2011111209 00:00:00 2011111209 hive> select a, b, a<b, a>b, a=b from iteblog; 2011111209 00:00:00 2011111209 false true false |
2.7空值判断:IS NULL
语法: A IS NULL
操作类型: 所有类型
说明: 如果表达式A的值为NULL,则为TRUE;否则为FALSE
hive> select 1 from iteblog where null is null; 1 |
2.8非空判断:IS NOT NULL
语法: A IS NOT NULL
操作类型: 所有类型
说明: 如果表达式A的值为NULL,则为FALSE;否则为TRUE
hive> select 1 from iteblog where 1 is not null; 1 |
2.9LIKE比较:LIKE
语法: A LIKE B
操作类型: strings
说明: 如果字符串A或者字符串B为NULL,则返回NULL;如果字符串A符合表达式B 的正则语法,则为TRUE;否则为FALSE。B中字符”_”表示任意单个字符,而字符”%”表示任意数量的字符。
hive> select 1 from iteblog where 'football' like 'foot%'; 1 hive> select 1 from iteblog where 'football' like 'foot____'; 1 <strong>注意:否定比较时候用NOT A LIKE B</strong> hive> select 1 from iteblog where NOT 'football' like 'fff%'; 1 |
2.10JAVA的LIKE操作: RLIKE
语法: A RLIKE B
操作类型: strings
说明: 如果字符串A或者字符串B为NULL,则返回NULL;如果字符串A符合JAVA正则表达式B的正则语法,则为TRUE;否则为FALSE。
hive> select 1 from iteblog where 'footbar’ rlike '^f.*r$’; 1 注意:判断一个字符串是否全为数字: hive>select 1 from iteblog where '123456' rlike '^\\d+$'; 1 hive> select 1 from iteblog where '123456aa' rlike '^\\d+$'; |
2.11REGEXP操作:REGEXP
语法: A REGEXP B
操作类型: strings
说明: 功能与RLIKE相同
hive> select 1 from iteblog where 'footbar' REGEXP '^f.*r$'; 1 |
第3章 数值函数
3.1取整函数:round
语法: round(double a)
返回值: BIGINT
说明: 返回double类型的整数值部分 (遵循四舍五入)
hive> select round(3.1415926) from iteblog; 3 hive> select round(3.5) from iteblog; 4 hive> create table iteblog as select round(9542.158) from iteblog; hive> describe iteblog; _c0 bigint |
3.2指定精度取整函数:round
语法: round(double a, int d)
返回值: DOUBLE
说明: 返回指定精度d的double类型
hive> select round(3.1415926,4) from iteblog; 3.1416 |
3.3向下取整函数:floor
语法: floor(double a)
返回值: BIGINT
说明: 返回等于或者小于该double变量的最大的整数
hive> select floor(3.1415926) from iteblog; 3 hive> select floor(25) from iteblog; 25 |
3.4向上取整函数:ceil
语法: ceil(double a)
返回值: BIGINT
说明: 返回等于或者大于该double变量的最小的整数
hive> select ceil(3.1415926) from iteblog; 4 hive> select ceil(46) from iteblog; 46 |
3.5向上取整函数:ceiling
语法: ceiling(double a)
返回值: BIGINT
说明: 与ceil功能相同
hive> select ceiling(3.1415926) from iteblog; 4 hive> select ceiling(46) from iteblog; 46 |
3.6取随机数函数:rand
语法: rand(),rand(int seed)
返回值: double
说明: 返回一个0到1范围内的随机数。如果指定种子seed,则会等到一个稳定的随机数序列
hive> select rand() from iteblog; 0.5577432776034763 hive> select rand() from iteblog; 0.6638336467363424 hive> select rand(100) from iteblog; 0.7220096548596434 hive> select rand(100) from iteblog; 0.7220096548596434 |
3.7自然指数函数:exp
语法: exp(double a)
返回值: double
说明: 返回自然对数e的a次方
hive> select exp(2) from iteblog; 7.38905609893065 <strong>自然对数函数</strong>: ln <strong>语法</strong>: ln(double a) <strong>返回值</strong>: double <strong>说明</strong>: 返回a的自然对数 1 hive> select ln(7.38905609893065) from iteblog; 2.0 |
3.8以10为底对数函数:log10
语法: log10(double a)
返回值: double
说明: 返回以10为底的a的对数
hive> select log10(100) from iteblog; 2.0 |
3.9以2为底对数函数:log2
语法: log2(double a)
返回值: double
说明: 返回以2为底的a的对数
hive> select log2(8) from iteblog; 3.0 |
3.10对数函数:log
语法: log(double base, double a)
返回值: double
说明: 返回以base为底的a的对数
hive> select log(4,256) from iteblog; 4.0 |
3.11幂运算函数:pow
语法: pow(double a, double p)
返回值: double
说明: 返回a的p次幂
hive> select pow(2,4) from iteblog; 16.0 |
3.12幂运算函数:power
语法: power(double a, double p)
返回值: double
说明: 返回a的p次幂,与pow功能相同
hive> select power(2,4) from iteblog; 16.0 |
3.13开平方函数:sqrt
语法: sqrt(double a)
返回值: double
说明: 返回a的平方根
hive> select sqrt(16) from iteblog; 4.0 |
3.14二进制函数:bin
语法: bin(BIGINT a)
返回值: string
说明: 返回a的二进制代码表示
hive> select bin(7) from iteblog; 111 |
3.15十六进制函数:hex
语法: hex(BIGINT a)
返回值: string
说明: 如果变量是int类型,那么返回a的十六进制表示;如果变量是string类型,则返回该字符串的十六进制表示
hive> select hex(17) from iteblog; 11 hive> select hex(‘abc’) from iteblog; 616263 |
3.16绝对值函数:abs
语法: abs(double a) abs(int a)
返回值: double int
说明: 返回数值a的绝对值
hive> select abs(-3.9) from iteblog; 3.9 hive> select abs(10.9) from iteblog; 10.9 |
3.17反转十六进制函数:unhex
语法: unhex(string a)
返回值: string
说明: 返回该十六进制字符串所代码的字符串
hive> select unhex(‘616263’) from iteblog; abc hive> select unhex(‘11’) from iteblog; - hive> select unhex(616263) from iteblog; abc |
3.18进制转换函数:conv
语法: conv(BIGINT num, int from_base, int to_base)
返回值: string
说明: 将数值num从from_base进制转化到to_base进制
hive> select conv(17,10,16) from iteblog; 11 hive> select conv(17,10,2) from iteblog; 10001 |
3.19 正取余函数: pmod
语法: pmod(int a, int b),pmod(double a, double b)
返回值: int double
说明: 返回正的a除以b的余数
hive> select pmod(9,4) from iteblog; 1 hive> select pmod(-9,4) from iteblog; 3 |
3.20正弦函数:sin
语法: sin(double a)
返回值: double
说明: 返回a的正弦值
hive> select sin(0.8) from iteblog; 0.7173560908995228 |
3.21反正弦函数:asin
语法: asin(double a)
返回值: double
说明: 返回a的反正弦值
hive> select asin(0.7173560908995228) from iteblog; 0.8 |
3.22余弦函数:cos
语法: cos(double a)
返回值: double
说明: 返回a的余弦值
hive> select cos(0.9) from iteblog; 0.6216099682706644 |
3.23反余弦函数:acos
语法: acos(double a)
返回值: double
说明: 返回a的反余弦值
hive> select acos(0.6216099682706644) from iteblog; 0.9 |
3.24positive函数:positive
语法: positive(int a), positive(double a)
返回值: int double
说明: 返回a
hive> select positive(-10) from iteblog; -10 hive> select positive(12) from iteblog; 12 |
3.25negative函数:negative
语法: negative(int a), negative(double a)
返回值: int double
说明: 返回-a
hive> select negative(-5) from iteblog; 5 hive> select negative(8) from iteblog; -8 |
3.26自然对数函数:ln
语法: ln(double a)
返回值: double
说明: 返回a的自然对数,a可为小数
hive> select ln(7.38905609893065);
2.0
3.27正切函数:tan
语法:tan(double a)
返回值: double
说明: 返回a的正切值
hive> select tan(0.8);
1.0296385570503641
3.28反正切函数:atan
语法:atan(double a)
返回值: double
说明: 返回a的反正切值
hive> select atan(1.0296385570503641);
0.8
3.29弧度值转换角度值:degrees
语法:degrees(double a)
返回值: double
说明: 返回a的角度值
hive> select degrees(1);
57.29577951308232
3.30角度值转换成弧度值:radians
语法:radians(double a)
返回值: double
说明: 返回a的弧度值
hive> selectradians(57.29577951308232);
1.0
3.31判断正负函数:sign
语法:sign(double a)
返回值: double
说明: 如果a是正数则返回1.0,是负数则返回-1.0,否则返回0.0
hive> select sign(-4);
-1.0
3.32数学e函数:e
语法:e()
返回值: double
说明: 数学常数e
hive> select e();
2.718281828459045
3.33数学pi函数:pi
语法:pi()
返回值: double
说明: 圆周率π
hive> select pi();
3.141592653589793
3.34阶乘函数:factorial
语法:factorial(int a)
返回值:bigint
说明: 求a的阶乘
hive> select factorial(5);
120
3.35立方根函数:cbrt
语法:cbrt(double a)
返回值:double
说明: 求a的立方根
hive> select cbrt(27);
3
3.36左移函数:shiftleft
语法:shiftleft(BIGINT a, int b)
返回值:int bigint
说明: 按位左移
hive> select shiftleft(4,2);
16
3.37右移函数:shiftright
语法:shiftright(BIGINT a, int b)
返回值:int bigint
说明: 按位右移
hive> select shiftright(16,1);
8
3.38无符号按位右移函数:shiftrightunsigned
语法:shiftrightunsigned(BIGINT a, int b)
返回值:int bigint
说明: 无符号按位右移(<<<)
hive> select shiftrightunsigned(32,2)
8
3.39求最大值函数:greatest
语法:greatest(T v1, T v2, …)
返回值:T
说明: 求最大值
hive> select greatest(1,2,3);
3
3.40求最小值函数:least
语法:least(T v1, T v2, …)
返回值:T
说明: 求最小值
hive> select least(1,2,3);
1
3.41银行家舍入法函数:bround
语法:bround(double a)
返回值:double
说明: 银行家舍入法(1-4:舍,6-9:进,5->前位数是偶:舍,5->前位数是奇:进)
hive> select bround(3.5)
3.0
3.42银行家精确舍入法函数:bround
语法:bround(double a,int d)
返回值:double
说明: 银行家舍入法,保留d位小数
hive> select bround(3.15,1)
3.1
hive> select bround(3.25,1)
3.3
第4章 日期函数
4.1UNIX时间戳转日期函数:from_unixtime
语法: from_unixtime(bigint unixtime[, string format])
返回值: string
说明: 转化UNIX时间戳(从1970-01-01 00:00:00 UTC到指定时间的秒数)到当前时区的时间格式
hive> select from_unixtime(1323308943,'yyyyMMdd') from iteblog; 20111208 |
4.2获取当前UNIX时间戳函数:unix_timestamp
语法: unix_timestamp()
返回值: bigint
说明: 获得当前时区的UNIX时间戳
hive> select unix_timestamp() from iteblog; 1323309615 |
4.3日期转UNIX时间戳函数:unix_timestamp
语法: unix_timestamp(string date)
返回值: bigint
说明: 转换格式为"yyyy-MM-dd HH:mm:ss"的日期到UNIX时间戳。如果转化失败,则返回0。
hive> select unix_timestamp('2011-12-07 13:01:03') from iteblog; 1323234063 |
4.4指定格式日期转UNIX时间戳函数:unix_timestamp
语法: unix_timestamp(string date, string pattern)
返回值:bigint
说明: 转换pattern格式的日期到UNIX时间戳。如果转化失败,则返回0。
hive> select unix_timestamp('20111207 13:01:03','yyyyMMdd HH:mm:ss') from iteblog; 1323234063 |
4.5日期时间转日期函数:to_date
语法: to_date(string timestamp)
返回值: string
说明: 返回日期时间字段中的日期部分。
hive> select to_date('2011-12-08 10:03:01') from iteblog; 2011-12-08 |
4.6日期转年函数:year
语法: year(string date)
返回值: int
说明: 返回日期中的年。
hive> select year('2011-12-08 10:03:01') from iteblog; 2011 hive> select year('2012-12-08') from iteblog; 2012 |
4.7日期转月函数:month
语法: month (string date)
返回值: int
说明: 返回日期中的月份。
hive> select month('2011-12-08 10:03:01') from iteblog; 12 hive> select month('2011-08-08') from iteblog; 8 |
4.8日期转天函数:day
语法: day (string date)
返回值: int
说明: 返回日期中的天。
hive> select day('2011-12-08 10:03:01') from iteblog; 8 hive> select day('2011-12-24') from iteblog; 24 |
4.9日期转小时函数:hour
语法: hour (string date)
返回值: int
说明: 返回日期中的小时。
hive> select hour('2011-12-08 10:03:01') from iteblog; 10 |
4.10日期转分钟函数:minute
语法: minute (string date)
返回值: int
说明: 返回日期中的分钟。
hive> select minute('2011-12-08 10:03:01') from iteblog; 3 |
4.11日期转秒函数:second
语法: second (string date)
返回值: int
说明: 返回日期中的秒。
hive> select second('2011-12-08 10:03:01') from iteblog; 1 |
4.12日期转周函数:weekofyear
语法: weekofyear (string date)
返回值: int
说明: 返回日期在当前的周数。
hive> select weekofyear('2011-12-08 10:03:01') from iteblog; 49 |
4.13日期比较函数:datediff
语法: datediff(string enddate, string startdate)
返回值: int
说明: 返回结束日期减去开始日期的天数。
hive> select datediff('2012-12-08','2012-05-09') from iteblog; 213 |
4.14日期增加函数:date_add
语法: date_add(string startdate, int days)
返回值: string
说明: 返回开始日期startdate增加days天后的日期。
hive> select date_add('2012-12-08',10) from iteblog; 2012-12-18 |
4.15日期减少函数:date_sub
语法:date_sub (string startdate, int days)
返回值: string
说明: 返回开始日期startdate减少days天后的日期。
hive> select date_sub('2012-12-08',10) from iteblog;
2012-11-28
4.16转化成指定的时区下时间戳函数:from_utc_timestamp
语法:from_utc_timestamp(timestamp, string timezone)
返回值:timestamp
说明: 如果给定的时间戳并非UTC,则将其转化成指定的时区下时间戳
hive> select from_utc_timestamp(‘1970-01-01 08:00:00’,‘PST’);
1970-01-01 00:00:00
4.17转化成UTC下的时间戳函数:to_utc_timestamp
语法:to_utc_timestamp(timestamp, string timezone)
返回值:timestamp
说明: 如果给定的时间戳指定的时区下时间戳,则将其转化成UTC下的时间戳。
hive> select to_utc_timestamp(‘1970-01-01 00:00:00’,‘PST’);
1970-01-01 08:00:00
4.18当前时间日期函数:current_date
语法: current_date()
返回值:date
说明: 返回当前时间日期
hive> select current_date;
2022-01-06
4.19当前时间日期函数:current_timestamp
语法:current_timestamp()
返回值:timestamp
说明: 返回当前时间戳
hive> select current_timestamp();
2022-01-06 22:52:11.309
4.20月份增加函数:add_months
语法:add_months(string start_date, int num_months)
返回值:string
说明: 返回当前时间下再增加num_months个月的日期
hive> select add_months(‘1996-10-21’,10);
1997-08-21
4.21最后一天的日期函数:last_day
语法:last_day(string date)
返回值:string
说明: 返回这个月的最后一天的日期,忽略时分秒部分(HH:mm:ss)
hive> select last_day(current_date());
2020-07-31
4.22下一个星期X所对应的日期函数:next_day
语法:next_day(string start_date, string day_of_week)
返回值:string
说明: 返回当前时间的下一个星期X所对应的日期 如:next_day(‘2015-01-14’, ‘TU’) = 2015-01-20 以2015-01-14为开始时间,其下一个星期二所对应的日期为2015-01-20
hive> select next_day(current_date(),‘su’);
2020-07-19
4.23时间的最开始年份或月份函数:trunc
语法:trunc(string date, string format)
返回值:string
说明: 返回时间的最开始年份或月份 如trunc(“2016-06-26”,“MM”)=2016-06-01 trunc(“2016-06-26”,“YY”)=2016-01-01 注意所支持的格式为MONTH/MON/MM, YEAR/YYYY/YY
hive> select trunc(current_date(),‘MM’);
2020-07-01
4.24相差的月份函数:months_between
语法:months_between(date1, date2)
返回值:double
说明: 返回date1与date2之间相差的月份,如date1>date2,则返回正,如果date1<date2,则返回负,否则返回0.0 如:months_between(‘1997-02-28 10:30:00’, ‘1996-10-30’) = 3.94959677 1997-02-28 10:30:00与1996-10-30相差3.94959677个月
hive> selectmonths_between(current_date(),‘2020-5-13’);
2.0
4.25指定格式返回时间函数:date_format
语法:date_format(date/timestamp/string ts, string fmt)
返回值:string
说明: 按指定格式返回时间date 如:date_format(“2016-06-22”,“MM-dd”)=06-22
hive> selectdate_format(current_date(),‘MM.dd’);
07.13
4.26当前星期函数:dayofweek
语法:dayofweek(date)
返回值:int
说明: 返回日期那天的周几
hive> select dayofweek(current_date());
2
4.27季节函数:quarter
语法:quarter(date/timestamp/string)
返回值:int
说明: 返回当前时间属性哪个季度 如quarter(‘2015-04-08’) = 2
第5章 条件函数
5.1If函数:if
语法:if(boolean testCondition, T valueTrue, T valueFalseOrNull)
返回值:T
说明: 当条件testCondition为TRUE时,返回valueTrue;否则返回valueFalseOrNull(valueTrue,valueFalseOrNull为泛型)
hive> select if(1=1,100,200);
100
5.2空查找函数:nvl
语法:nvl(T value, T default_value)
返回值:T
说明: 如果value值为NULL就返回default_value,否则返回value
hive> select nvl(null,5);
5
5.3非空查找函数:COALESCE
语法:COALESCE(T v1, T v2,…)
返回值:T
说明: 返回参数中的第一个非空值;如果所有值都为NULL,那么返回NULL
hive> select COALESCE (NULL,44,55);
44
5.4条件判断函数:CASE
语法:CASE a WHEN b THEN c [WHEN d THEN e]* [ELSE f] END
返回值:T
说明: 如果a等于b,那么返回c;如果a等于d,那么返回e;否则返回f
hive> select CASE 4 WHEN 5 THEN 5 WHEN4 THEN 4 ELSE 3 END;
4
5.5条件判断函数:CASE
语法:CASE WHEN a THEN b [WHEN c THEN d]* [ELSE e] END
返回值:T
说明: 如果a为TRUE,则返回b;如果c为TRUE,则返回d;否则返回e
hive> select CASE WHEN 5>0 THEN 5WHEN 4>0 THEN 4 ELSE 0 END;
5
5.6空值判断函数:isnull
语法:isnull( a )
返回值:boolean
说明: 如果a为null就返回true,否则返回false
hive> select isnull(5);
false
5.7非空值判断函数:isnotnull
语法:isnotnull ( a )
返回值:boolean
说明: 如果a为非null就返回true,否则返回false
hive> select isnotnull(5);
true
第6章 字符串函数
6.1字符串长度函数:length
语法: length(string A)
返回值: int
说明:返回字符串A的长度
hive> select length('abcedfg') from iteblog; 7 |
6.2字符串反转函数:reverse
语法: reverse(string A)
返回值: string
说明:返回字符串A的反转结果
hive> select reverse(abcedfg’) from iteblog; gfdecba |
6.3字符串连接函数:concat
语法: concat(string A, string B…)
返回值: string
说明:返回输入字符串连接后的结果,支持任意个输入字符串
hive> select concat(‘abc’,'def’,'gh’) from iteblog; abcdefgh |
6.4带分隔符字符串连接函数:concat_ws
语法: concat_ws(string SEP, string A, string B…)
返回值: string
说明:返回输入字符串连接后的结果,SEP表示各个字符串间的分隔符
hive> select concat_ws(',','abc','def','gh') from iteblog; abc,def,gh |
6.5字符串截取函数:substr,substring
语法: substr(string A, int start),substring(string A, int start)
返回值: string
说明:返回字符串A从start位置到结尾的字符串
hive> select substr('abcde',3) from iteblog; cde hive> select substring('abcde',3) from iteblog; cde hive> select substr('abcde',-1) from iteblog; (和ORACLE相同) e |
6.6字符串截取函数:substr,substring
语法: substr(string A, int start, int len),substring(string A, int start, intlen)
返回值: string
说明:返回字符串A从start位置开始,长度为len的字符串
hive> select substr('abcde',3,2) from iteblog; cd hive> select substring('abcde',3,2) from iteblog; cd hive>select substring('abcde',-2,2) from iteblog; de |
6.7字符串转大写函数:upper,ucase
语法: upper(string A) ucase(string A)
返回值: string
说明:返回字符串A的大写格式
hive> select upper('abSEd') from iteblog; ABSED hive> select ucase('abSEd') from iteblog; ABSED |
6.8字符串转小写函数:lower,lcase
语法: lower(string A) lcase(string A)
返回值: string
说明:返回字符串A的小写格式
hive> select lower('abSEd') from iteblog; absed hive> select lcase('abSEd') from iteblog; absed |
6.9去空格函数:trim
语法: trim(string A)
返回值: string
说明:去除字符串两边的空格
hive> select trim(' abc ') from iteblog; abc |
6.10左边去空格函数:ltrim
语法: ltrim(string A)
返回值: string
说明:去除字符串左边的空格
hive> select ltrim(' abc ') from iteblog; abc |
6.11右边去空格函数:rtrim
语法: rtrim(string A)
返回值: string
说明:去除字符串右边的空格
hive> select rtrim(' abc ') from iteblog; abc |
6.12正则表达式替换函数:regexp_replace
语法: regexp_replace(string A, string B, string C)
返回值: string
说明:将字符串A中的符合java正则表达式B的部分替换为C。注意,在有些情况下要使用转义字符,类似oracle中的regexp_replace函数。
hive> select regexp_replace('foobar', 'oo|ar', '') from iteblog; fb |
6.13正则表达式解析函数:regexp_extract
语法: regexp_extract(string subject, string pattern, int index)
返回值: string
说明:将字符串subject按照pattern正则表达式的规则拆分,返回index指定的字符。
hive> select regexp_extract('foothebar', 'foo(.*?)(bar)', 1) from iteblog; the hive> select regexp_extract('foothebar', 'foo(.*?)(bar)', 2) from iteblog; bar hive> select regexp_extract('foothebar', 'foo(.*?)(bar)', 0) from iteblog; foothebar strong>注意,在有些情况下要使用转义字符,下面的等号要用双竖线转义,这是java正则表达式的规则。 select data_field, regexp_extract(data_field,'.*?bgStart\\=([^&]+)',1) as aaa, regexp_extract(data_field,'.*?contentLoaded_headStart\\=([^&]+)',1) as bbb, regexp_extract(data_field,'.*?AppLoad2Req\\=([^&]+)',1) as ccc from pt_nginx_loginlog_st where pt = '2012-03-26' limit 2; |
6.14URL解析函数:parse_url
语法: parse_url(string urlString, string partToExtract [, string keyToExtract])
返回值: string
说明:返回URL中指定的部分。partToExtract的有效值为:HOST, PATH, QUERY, REF, PROTOCOL, AUTHORITY, FILE,and USERINFO.
hive> select parse_url('https://www.iteblog.com/path1/p.php?k1=v1&k2=v2#Ref1', 'HOST') from iteblog; hive> select parse_url('https://www.iteblog.com/path1/p.php?k1=v1&k2=v2#Ref1', 'QUERY', 'k1') from iteblog; v1 |
6.15json解析函数:get_json_object
语法: get_json_object(string json_string, string path)
返回值: string
说明:解析json的字符串json_string,返回path指定的内容。如果输入的json字符串无效,那么返回NULL。
hive> select get_json_object('{"store": > {"fruit":\[{"weight":8,"type":"apple"},{"weight":9,"type":"pear"}], > "bicycle":{"price":19.95,"color":"red"} > }, > "email":"amy@only_for_json_udf_test.net", > "owner":"amy" > } > ','$.owner') from iteblog; amy |
6.16空格字符串函数:space
语法: space(int n)
返回值: string
说明:返回长度为n的字符串
hive> select space(10) from iteblog; hive> select length(space(10)) from iteblog; 10 |
6.17重复字符串函数:repeat
语法: repeat(string str, int n)
返回值: string
说明:返回重复n次后的str字符串
hive> select repeat('abc',5) from iteblog; abcabcabcabcabc |
6.18首字符ascii函数:ascii
语法: ascii(string str)
返回值: int
说明:返回字符串str第一个字符的ascii码
hive> select ascii('abcde') from iteblog; 97 |
6.19左补足函数:lpad
语法: lpad(string str, int len, string pad)
返回值: string
说明:将str进行用pad进行左补足到len位
hive> select lpad('abc',10,'td') from iteblog; tdtdtdtabc 注意:与GP,ORACLE不同,pad 不能默认 |
6.20右补足函数:rpad
语法: rpad(string str, int len, string pad)
返回值: string
说明:将str进行用pad进行右补足到len位
hive> select rpad('abc',10,'td') from iteblog; abctdtdtdt |
6.21分割字符串函数:split
语法: split(string str, string pat)
返回值: array
说明: 按照pat字符串分割str,会返回分割后的字符串数组
hive> select split('abtcdtef','t') from iteblog; ["ab","cd","ef"] |
6.22集合查找函数:find_in_set
语法: find_in_set(string str, string strList)
返回值: int
说明: 返回str在strlist第一次出现的位置,strlist是用逗号分割的字符串。如果没有找该str字符,则返回0
hive> select find_in_set('ab','ef,ab,de') from iteblog;
2
hive> select find_in_set('at','ef,ab,de') from iteblog;
0
6.23转换成64位的字符串:base64
语法:base64(binary bin)
返回值:string
说明:将二进制bin转换成64位的字符串
6.24字符串连接函数:context_ngrams
语法:context_ngrams(array, array, int K, int pf)
返回值:array<struct<string,double>>
说明:与ngram类似,但context_ngram()允许你预算指定上下文(数组)来去查找子序列,具体看StatisticsAndDataMining(这里的解释更易懂)
6.25将数值X转换成"#,###,###.##"格式字符串:format_number
语法: format_number(number x, int d)
返回值:string
说明:将数值X转换成"#,###,###.##"格式字符串,并保留d位小数,如果d为0,将进行四舍五入且不保留小数
hive> selectformat_number(123345.65545,2);
123,345.66
6.26指定的字符集将二进制值bin解码成字符串:decode
语法:decode(binary bin, string charset)
返回值:string
说明:使用指定的字符集charset将二进制值bin解码成字符串,支持的字符集有:‘US-ASCII’, ‘ISO-8859-1’, ‘UTF-8’, ‘UTF-16BE’, ‘UTF-16LE’, ‘UTF-16’,如果任意输入参数为NULL都将返回NULL
6.27指定的字符集charset将字符串编码成二进制值:encode
语法: encode(string src, string charset)
返回值:binary
说明:使用指定的字符集charset将字符串编码成二进制值,支持的字符集有:‘US-ASCII’, ‘ISO-8859-1’, ‘UTF-8’, ‘UTF-16BE’, ‘UTF-16LE’, ‘UTF-16’,如果任一输入参数为NULL都将返回NULL
6.28文件数据与字符串str匹配: in_file
语法: in_file(string str, string filename)
返回值:boolean
说明:如果文件名为filename的文件中有一行数据与字符串str匹配成功就返回true
6.29查找字符串str中子字符串substr出现的位置:instr
语法: instr(string str, string substr)
返回值:int
说明:查找字符串str中子字符串substr出现的位置,如果查找失败将返回0,如果任一参数为Null将返回null,注意位置为从1开始的
hive> select instr(‘dvfgefggdgaa’,‘aa’);
11
6.30第一次出现的位置:locate
语法:locate(string substr, string str[, int pos])
返回值:int
说明:查找字符串str中的pos位置后字符串substr第一次出现的位置
hive> select locate(‘aa’,‘aabbedfaad’,2);
8
6.31返回出现次数TOPK的的子序列:ngrams
语法: ngrams(array, int N, int K, int pf)
返回值:array<struct<string,double>>
说明:返回出现次数TOP K的的子序列,n表示子序列的长度,具体看StatisticsAndDataMining (这里的解释更易懂)
6.32printf风格格式输出字符串:printf
语法:printf(String format, Obj… args)
返回值:string
说明:按照printf风格格式输出字符串
hive> select printf(‘abfhg’);
Abfhg
6.33字符串str将被转换成单词数组:sentences
语法: sentences(string str, string lang, string locale)
返回值:array
说明:字符串str将被转换成单词数组,如:sentences(‘Hello there! How are you?’) =( (“Hello”, “there”), (“How”, “are”, “you”) )
hive> select sentences(‘Hello there! How are you?’);
[[“Hello”,“there”],[“How”,“are”,“you”]]
6.34字符串反转函数:reverse
语法:reverse(string A)
返回值:string
说明:返回字符串A的反转结果
hive> select reverse(‘abc’);
cba
6.35字符串str按照指定分隔符转换成Map: split
语法:str_to_map(text[, delimiter1, delimiter2])
返回值:map<string,string>
说明:将字符串str按照指定分隔符转换成Map,第一个参数是需要转换字符串,第二个参数是键值对之间的分隔符,默认为逗号;第三个参数是键值之间的分隔符,默认为"="
6.36截取第count分隔符之前的字符串:substring_index
语法: substring_index(string A, string delim, int count)
返回值: string
说明:截取第count分隔符之前的字符串,如count为正则从左边开始截取,如果为负则从右边开始截取
6.37字符串替换成to中的字符串:substring_index
语法: translate(string|char|varchar input, string|char|varchar from,string|char|varchar to)
返回值: string
说明:将input出现在from中的字符串替换成to中的字符串 如:translate(“MOBIN”,“BIN”,“M”)=“MOM”
hive> select translate(“MOBIN”,“BIN”,“M”);
MOM
6.38首字母大写函数:initcap
语法:initcap(string A)
返回值: string
说明:将字符串A转换第一个字母大写其余字母的字符串
hive> select initcap(‘abcd def’);
Abcd Def
6.39两个字符串之间的差异大小:levenshtein
语法: levenshtein(string A, string B)
返回值: int
说明:计算两个字符串之间的差异大小 如:levenshtein(‘kitten’, ‘sitting’) = 3
hive> select levenshtein(‘kitten’, ‘sitting’);
3
6.40字符串转换成soundex字符串:soundex
语法: soundex(string A)
返回值: string
说明: 将普通字符串转换成soundex字符串
第7章 聚合函数
7.1 个数统计函数: count
语法: count(*), count(expr), count(DISTINCT expr[, expr…])
返回值: bigint
说明: count(*)统计检索出的行的个数,包括NULL值的行;count(expr)返回指定字段的非空值的个数;count(DISTINCTexpr[, expr_.])统计提供非NULL且去重后的expr表达式值的行数
7.2 总和统计函数: sum
语法:sum(col), sum(DISTINCT col)
返回值: double
说明:sum(col)统计结果集中col的相加的结果;sum(DISTINCT col)统计结果中col不同值相加的结果
7.3 平均值统计函数: avg
语法:avg(col), avg(DISTINCT col)
返回值: double
说明:avg(col)统计结果集中col的平均值;avg(DISTINCT col)统计结果中col不同值相加的平均值
7.4 最小值统计函数: min
语法:min(col)
返回值: double
说明:统计结果集中col字段的最小值
7.5 最大值统计函数: max
语法:max(col)
返回值: double
说明:统计结果集中col字段的最大值
7.6 非空集合总体变量函数:var_pop
语法: variance(col), var_pop(col)
返回值: double
说明:统计结果集中col非空集合的总体变量(忽略null),(求指定列数值的方差)
7.7 非空集合样本变量函数:var_samp
语法: var_samp (col)
返回值: double
说明:统计结果集中col非空集合的样本变量(忽略null)(求指定列数值的样本方差)
7.8 总体标准偏离函数:stddev_pop
语法:stddev_pop(col)
返回值: double
说明:该函数计算总体标准偏离,并返回总体变量的平方根,其返回值与VAR_POP函数的平方根相同(求指定列数值的标准偏差)
7.9 样本标准偏离函数:stddev_samp
语法: stddev_samp (col)
返回值: double
说明:该函数计算样本标准偏离,(求指定列数值的样本标准偏差)
7.10 协方差函数:covar_pop
语法: covar_pop(col1, col2)
返回值: double
说明:求指定列数值的协方差
7.11 样本协方差函数:covar_samp
语法: covar_samp(col1, col2)
返回值: double
说明:求指定列数值的样本协方差
7.12 相关系数函数:corr
语法:corr(col1, col2)
返回值: double
说明:返回两列数值的相关系数
7.13 中位数函数:percentile
语法: percentile(BIGINT col, p)
返回值: double
说明:求准确的第pth个百分位数,p必须介于0和1之间,但是col字段目前只支持整数,不支持浮点数类型
7.14 中位数函数:percentile
语法: percentile(BIGINT col, array(p1 [, p2]…))
返回值: array
说明:功能和上述类似,之后后面可以输入多个百分位数,返回类型也为array,其中为对应的百分位数
select percentile(score,<0.2,0.4>)from lxw_dual;取0.2,0.4位置的数据
1
7.15 近似中位数函数:percentile_approx
语法:percentile_approx(DOUBLE col, p [, B])
返回值: double
说明:求近似的第pth个百分位数,p必须介于0和1之间,返回类型为double,但是col字段支持浮点类型。参数B控制内存消耗的近似精度,B越大,结果的准确度越高。默认为10,000。当col字段中的distinct值的个数小于B时,结果为准确的百分位数
7.16 近似中位数函数:percentile_approx
语法: percentile_approx(DOUBLE col, array(p1 [, p2]…) [, B])
返回值: array
说明:功能和上述类似,之后后面可以输入多个百分位数,返回类型也为array,其中为对应的百分位数
7.17 直方图:histogram_numeric
语法: histogram_numeric(col, b)
返回值: array<struct {‘x’,‘y’}>
说明:以b为基准计算col的直方图信息
hive> selecthistogram_numeric(100,5)
[{“x”:100.0,“y”:1.0}]
7.18 高级聚合:collect_list/collect_set
1)collect_list 收集并形成list集合,结果不去重
语法:collect_list(col)
返回值:array
说明:将某分组内该字段的所有值收集成为一个数组,结果不去重
hive>
select
sex,
collect_list(job)
from
employee
group by
sex
结果:
女 ["行政","研发","行政","前台"]
男 ["销售","研发","销售","前台"]
2)collect_set 收集并形成set集合,结果去重
语法:collect_set(col)
返回值:array
说明:将某分组内该字段的所有值收集成为一个数组,结果去重
hive>
select
sex,
collect_set(job)
from
employee
group by
sex
结果:
女 ["行政","研发","前台"]
男 ["销售","研发","前台"]
第8章 表生成函数
8.1 explode
语法: explode(array a)
返回值: Array Type
说明:对于a中的每个元素,将生成一行且包含该元素
8.2 explode
语法:explode(ARRAY)
返回值:N rows
说明:每行对应数组中的一个元素
8.3 explode
语法: explode(MAP)
返回值:N rows
说明:每行对应每个map键-值,其中一个字段是map的键,另一个字段是map的值
8.4 posexplode
语法: posexplode(ARRAY)
返回值:N rows
说明:与explode类似,不同的是还返回各元素在数组中的位置
8.5 posexplode
语法: stack(INT n, v_1, v_2, …, v_k)
返回值:N rows
说明:把M列转换成N行,每行有M/N个字段,其中n必须是个常数
8.6 posexplode
语法: json_tuple(jsonStr, k1, k2, …)
返回值: tuple
说明:从一个JSON字符串中获取多个键并作为一个元组返回,与get_json_object不同的是此函数能一次获取多个键值
8.7 parse_url_tuple
语法: parse_url_tuple(url, p1, p2, …)
返回值: tuple
说明:返回从URL中抽取指定N部分的内容,参数url是URL字符串,而参数p1,p2,…是要抽取的部分,这个参数包含HOST, PATH, QUERY, REF, PROTOCOL, AUTHORITY, FILE,USERINFO, QUERY:
8.8 parse_url_tuple
语法: inline(ARRAY<STRUCT[,STRUCT]>)
返回值: tuple
说明:将结构体数组提取出来并插入到表中
8.9 示例
一进多出(一行进入,多行输出)。
1)explode将数组或者map展开
hive> select explode(array('a','b','d','c'));
结果:
a
b
d
c
2)json_tuple取出json字符串中属性的值
hive>
select json_tuple('{"name":"王二狗","sex":"男","age":"25"}','name','sex','age');
结果:
王二狗 男 25
第9章 复合类型构建操作
9.1Map类型构建:map
语法: map (key1, value1, key2, value2, …)
说明:根据输入的key和value对构建map类型
hive> Create table iteblog as select map('100','tom','200','mary') as t from iteblog; hive> describe iteblog; t map<string ,string> hive> select t from iteblog; {"100":"tom","200":"mary"} |
9.2Struct类型构建:struct
语法: struct(val1, val2, val3, …)
说明:根据输入的参数构建结构体struct类型
hive> create table iteblog as select struct('tom','mary','tim') as t from iteblog; hive> describe iteblog; t struct<col1:string ,col2:string,col3:string> hive> select t from iteblog; {"col1":"tom","col2":"mary","col3":"tim"} |
9.3array类型构建:array
语法: array(val1, val2, …)
说明:根据输入的参数构建数组array类型
hive> create table iteblog as select array("tom","mary","tim") as t from iteblog; hive> describe iteblog; t array<string> hive> select t from iteblog; ["tom","mary","tim"] |
第10章 复杂类型访问操作
10.1array类型访问:A[n]
语法: A[n]
操作类型: A为array类型,n为int类型
说明:返回数组A中的第n个变量值。数组的起始下标为0。比如,A是个值为['foo', 'bar']的数组类型,那么A[0]将返回'foo',而A[1]将返回'bar'
hive> create table iteblog as select array("tom","mary","tim") as t from iteblog; hive> select t[0],t[1],t[2] from iteblog; tom mary tim |
10.2map类型访问:M[key]
语法: M[key]
操作类型: M为map类型,key为map中的key值
说明:返回map类型M中,key值为指定值的value值。比如,M是值为{'f' -> 'foo', 'b' -> 'bar', 'all' ->'foobar'}的map类型,那么M['all']将会返回'foobar'
hive> Create table iteblog as select map('100','tom','200','mary') as t from iteblog; hive> select t['200'],t['100'] from iteblog; mary tom |
10.3struct类型访问:S.x
语法: S.x
操作类型: S为struct类型
说明:返回结构体S中的x字段。比如,对于结构体struct foobar {int foo, int bar},foobar.foo返回结构体中的foo字段
hive> create table iteblog as select struct('tom','mary','tim') as t from iteblog; hive> describe iteblog; t struct<col1:string ,col2:string,col3:string> hive> select t.col1,t.col3 from iteblog; tom tim |
第11章 复杂类型长度统计函数
11.1Map类型长度函数:size(Map<k .V>)
语法: size(Map<k .V>)
返回值: int
说明: 返回map类型的长度
hive> select size(map('100','tom','101','mary')) from iteblog; 2 |
11.2array类型长度函数:size(Array<T>)
语法:size(Array<T>)
返回值: int
说明: 返回array类型的长度
hive> select size(array('100','101','102','103')) from iteblog; 4 |
11.3类型转换函数
1)转换成二进制: binary
语法:binary(string|binary)
返回值:binary
说明: 将输入的值转换成二进制
2)类型转换函数: cast
语法: cast(expr as <type>)
返回值: Expected "=" to follow "type"
说明: 返回转换后的数据类型
hive> select cast(1 as bigint) from iteblog; 1 |
第12章 窗口函数
基本语法:函数+ over( [partition by ...] [order by ...] [窗口子句] )
·over表示开窗,默认窗口大小会包含所有数据。
·partition by表示根据字段再划分一个细窗口,相同字段进入同一个细窗口里面,每个窗口之间相互独立,窗口子句对于每个细窗口独立生效。
·order by表示窗口内按什么排序,如果只有over表示直接最大窗口排序;如果有partition by每个细窗口单独排序。
·窗口子句,可以进一步限定范围
(rows | range) between (unbounded | [num])preceding and ([num] preceding | current row | (unbounded | [num]) following
(rows | range) between current row and (current row| (unbounded | [num]) following)
(rows | range) between [num] following and(unbounded | [num]) following
rows between unbounded preceding and unboundedfollowing
行的范围为上无边界到下无边界(第一行到最后一行)。
注:窗口函数是一行一行执行的。
12.1偏移量函数:lag
语法:lag(col,n,default_val)
返回值:字段类型
说明:往前第n行数据。
12.2偏移量函数:lead
语法:lead(col,n, default_val)
返回值:字段类型
说明:往后第n行数据。
12.3窗口分析函数:first_value
语法:first_value (col,true/false)
返回值:字段类型
说明:当前窗口下的第一个值,第二个参数为true,跳过空值。
12.4窗口分析函数:last_value
语法:last_value (col,true/false)
返回值:字段类型
说明:当前窗口下的最后一个值,第二个参数为true,跳过空值。
12.5跳跃排序函数:rank
语法:rank() over(……)
返回值:int
说明:排名相同时会重复,总数不会减少(12225……)。
12.6不跳跃排序函数:dense_rank
语法:dense_rank() over(……)
返回值:int
说明:排名相同时会重复,总数会减少(12223……)。
12.7顺序唯一的排序函数:row_number
语法:row_number() over(……)
返回值:int
说明:行号(1234567……)。
12.8分组函数:lead
语法:ntile() over(……)
返回值:int
说明:分组并给上组号。