Drilling fluid shale shaker is a kind of filterable mechanical separation equipment, compared with other mechanical separation equipment, its unit cost is a kind of economy and high efficiency separation equipment which obtain solid removal amount. Oilfield shale shaker is made of screen body, machine rack and gearing, according mechanical vibration make solid phase which is biger than screen hole and the adhesive attraction will screen the solid phase particles that is smaller than screen hole.
A mud cleaner is the combination of desander and desilter, and mainly used to remove drilled solids from mud. In many drilling operations, an oilfield drilling mud conditioner is installed in its mud system. It is usually located in a mud tank in the same location. The weighted mud flows to the inlet head section of the mud desander and desilter entering the hydrocyclones for separation of particles. Mud leaving the underflow is further screened with fine mesh to separate larger particles allowing only barite size particles to pass through the screen returning and recovering then the clean mud. The purpose of the mud cleaner is to remove drilled solids larger than barite.
Drilling fluids decanter centrifuge is the fourth phase solids control equipment used in drilling solids control system. It is set behind the mud cleaner, using the principle of centrifugal action to separate the solid particles above 2 microns from the drilling fluids.
KOSUN is a China oilfield solids control equipment manufacturer with the location in Xi’ an, Shannxi and has partners around the world. It can offer you the above solids control equipment, but also others, such as mud tank, vertical cuttings dryer, vertical centrifuge and etc. KOSUN waits for your option for the best solids control equipment.
来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/29474669/viewspace-1086925/,如需转载,请注明出处,否则将追究法律责任。
转载于:http://blog.itpub.net/29474669/viewspace-1086925/