网络配置
网卡绑定(待验证)
irdb1和irdb2两台主机均有四块光纤网卡,两两做成EtherChannel模式,并对EtherChannel的网卡ent4和ent5配置IP地址.
将网卡做成EtherChannel模式,使用命令:
#smitty etherchannel
àAdd An EtherChannel / Link Aggregation
à按F7选择ent0和ent3做成通道ent4
à按F7选择ent1和ent2做成通道ent5
配置好后的通道网卡的IP表如下:
主机名称 | 物理 网卡 | I/O位置 | Ether Channel | IP地址 |
irdb1 | ent0 | U7311.D11.YL01170-P1-C4-T1 | ent4 | IP:10.52.173.8 MASK:255.255.255.192 GATE:10.52.173.1 |
ent1 | U7311.D11.YL01170-P1-C5-T1 | |||
ent2 | U7311.D11.YL01170-P1-C2-T1 | ent5 | IP:172.16.10.1 MASK:255.255.255.0 | |
ent3 | U7311.D11.YL01170-P1-C3-T1 | |||
irdb2 | ent0 | U7311.D11.YL00926-P1-C2-T1 | ent4 | IP:10.52.173.9 MASK:255.255.255.192 GATE:10.52.173.1 |
ent3 | U7311.D11.YL00926-P1-C5-T1 | |||
ent1 | U7311.D11.YL00926-P1-C3-T1 | ent5 | IP:172.16.10.2 MASK:255.255.255.0 | |
ent2 | U7311.D11.YL00926-P1-C4-T1 |
修改主机名
# smit hostname
设置上面机器为P61A,下面机器为P61B
修改IP
# smit inet
-> Change / Show Characteristics of a Network Interface
-> 选择一个网络接口,进行IP配置
P61A en1 10.10.1.61 255.255.255.0
en0 12.0.0.61 255.0.0.0
P61B en1 10.10.1.62 255.255.255.0
en0 12.0.0.62 255.0.0.0
查看IP设置
# ifconfig -a
# netstat -in
修改/etc/hosts
127.0.0.1 loopback localhost
10.10.1.61 P61A
12.0.0.61 P61A_priv
10.10.1.101 P61A_vip
10.10.1.62 P61B
12.0.0.62 P61B_priv
10.10.1.102 P61B_vip
修改/etc/hosts.equiv
###### add by zhangqiaoc ######
+ root
+ oracle
###### end by zhangqiaoc ######
修改root oracle用户HOME目录下的.rhosts文件
###### add by zhangqiaoc ######
+
###### end by zhangqiaoc ######
测试:
rsh P61A date
rsh P61B date
rcp tmp.txt P61A:/u01/app/oracle
rcp tmp.txt P61B:/u01/app/oracle
配置NTP
在server端:62
bash-3.00# vi /etc/ntp.conf
#broadcastclient
server 127.127.1.0
driftfile /etc/ntp.drift
tracefile /etc/ntp.trace
"/etc/ntp.conf" 42 lines, 1017 characters
bash-3.00# startsrc -s xntpd
0513-059 The xntpd Subsystem has been started. Subsystem PID is 274488.
bash-3.00# lssrc -ls xntpd
Program name: /usr/sbin/xntpd
Version: 3
Leap indicator: 11 (Leap indicator is insane.)
Sys peer: no peer, system is insane
Sys stratum: 16
Sys precision: -16
Debug/Tracing: DISABLED
Root distance: 0.000000
Root dispersion: 0.000000
Reference ID: no refid, system is insane
Reference time: no reftime, system is insane
Broadcast delay: 0.003906 (sec)
Auth delay: 0.000122 (sec)
System flags: pll monitor filegen
System uptime: 17 (sec)
Clock stability: 0.000000 (sec)
Clock frequency: 0.000000 (sec)
Peer: 127.127.1.0
flags: (configured)(refclock)
stratum: 3, version: 3
our mode: client, his mode: server
Subsystem Group PID Status
xntpd tcpip 274488 active
bash-3.00# lssrc -ls xntpd|grep "Sys peer"
Sys peer: no peer, system is insane
bash-3.00# lssrc -ls xntpd|grep "Sys peer"
Sys peer: 127.127.1.0
在client端: 61
bash-3.00# vi /etc/ntp.conf
server 10.10.1.62
driftfile /etc/ntp.drift
tracefile /etc/ntp.trace
"/etc/ntp.conf" 42 lines, 1023 characters
bash-3.00# startsrc -s xntpd
0513-059 The xntpd Subsystem has been started. Subsystem PID is 282860.
bash-3.00# lssrc -ls xntpd|grep "Sys peer"
Sys peer: P61B
来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/8242091/viewspace-591198/,如需转载,请注明出处,否则将追究法律责任。
转载于:http://blog.itpub.net/8242091/viewspace-591198/