转自:CSDN
------------------------------------------------------------------abs(x) 绝对值
arctan(x) 反正切
cos(x) 传回馀弦函数值
exp(x) e的x次幂
frac(x) 取小数部分
int(x) 取整
ln(x) 自然对数
sin(x) 传回正弦函数值
sqr(x) x*x
sqrt(x) 平方根
其它
pred(x) pred('D')='C', pred(true)=1;
succ(x) succ('Y')='Z', succ(pred(x))=x
ord(x) 求x在字符集中的序号,如ord('A')=65
chr(x) chr(65)='A'
round(x) 四舍五入
trunc(x) trunc(4.8)=4,trunc('-3.6')=-3
upcase(x) upcase('a')='A'
hi(I) hi($2A30)=$2A
lo(I) lo($2A30)=$30
random(n) 产生[0,n)间的随机整数
sizeof(name) 求出某类型或变量在内存中占用的字节数
swap(num) swap($3621)=$2136
================================
Arithmetic routines 数学运算
================================
Abs 绝对值
---------------------------------------------------------
Unit System
函数原型 function Abs(X);
说明 X为整数or实数.
范例
var
r: Real;
i: Integer;
begin
r := Abs(-2.3); { 2.3 }
i := Abs(-157); { 157 }
end;
----------------------------------------------------------
ArcTan 三角函数
----------------------------------------------------------
范例
Cos
var R: Extended;
begin
R := Cos(Pi);
end;
----------------------------------------------------------
Sin
----------------------------------------------------------
范例
var
R: Extended;
S: string;
begin
R := Sin(Pi);
Str(R:5:3, S);
Canvas.TextOut(10, 10, 'The Sin of Pi is ' + S);
end;
----------------------------------------------------------
Unit System
函数原型 function ArcTan(X: Extended): Extended;
函数原型 function Cos(X: Extended): Extended;
函数原型 function Sin(X: Extended): Extended;
----------------------------------------------------------
说明 X为径度.
Tan(x) === Sin(x) / Cos(x)
ArcSin(x) = ArcTan (x/sqrt (1-sqr (x)))
ArcCos(x) = ArcTan (sqrt (1-sqr (x)) /x)
左边这三个不是函数,而是右边运算求得.
范例
var
R: Extended;
begin
R := ArcTan(Pi);
end;
范例 var
R: Extended;
S: string;
begin
R := Sin(Pi);
Str(R:5:3, S);
Canvas.TextOut(10, 10, 'The Sin of Pi is ' + S);
end;
----------------------------------------------------------
Frac 求一个实数的小数部份
----------------------------------------------------------
Unit System
函数原型 function Frac(X: Real): Real;
说明 X为实数.
范例 var
R: Real;
begin
R := Frac(123.456); { 0.456 }
R := Frac(-123.456); { -0.456 }
end;
------------------------------------------
Int 求一个实数的整数部份
------------------------------------------
Unit System
函数原型 function Int(X: Real): Real;
说明 X为实数.
范例 var
R: Real;
begin
R := Int(123.456); { 123.0 }
R := Int(-123.456); { -123.0 }
end;
------------------------------------------
Pi 就是数学的Pi
------------------------------------------
Unit System
函数原型 function Pi: Extended;
说明 它是一个函数,但我们就把它当作是预设的变数来用吧!
Pi= 3.1415926535897932385
------------------------------------------
Sqr X的平方
-----------------------------------------
范例
var
S, Temp: string;
begin
Str(Sqr(5.0):3:1, Temp);
S := '5 squared is ' + Temp + #13#10;
Str(Sqrt(2.0):5:4, Temp);
S := S + 'The square root of 2 is ' + Temp;
MessageDlg(S, mtInformation, [mbOk], 0);
end;
-----------------------------------------
Sqrt X的平方根
------------------------------------------
Unit System
函数原型 function Sqr(X: Extended): Extended;
函数原型 function Sqrt(X: Extended): Extended;
范例 var
S, Temp: string;
begin
Str(Sqr(5.0):3:1, Temp);
S := '5 squared is ' + Temp + #13#10;
Str(Sqrt(2.0):5:4, Temp);
S := S + 'The square root of 2 is ' + Temp;
MessageDlg(S, mtInformation, [mbOk], 0);
end;
------------------------------------------
Ln 自然对数
------------------------------------------
范例
var
e : real;
S : string;
begin
e := Exp(1.0);
Str(ln(e):3:2, S);
S := 'e = ' + FloatToStr(e) + '; ln(e) = ' + S;
Canvas.TextOut(10, 10, S);
end;
----------------------------------------
Exp 指数
------------------------------------------
Unit System
函数原型 function Ln(X: Real): Real;
函数原型 function Exp(X: Real): Real;
范例 var
e : real;
S : string;
begin
e := Exp(1.0);
Str(ln(e):3:2, S);
S := 'ln(e) = ' + S;
Canvas.TextOut(10, 10, S);
end;
------------------------------------------
Date and time routines 日期及时间函数
------------------------------------------
Date 传回目前的日期
Unit SysUtils
函数原型 function Date: TDateTime;
范例 procedure TForm1.Button1Click(Sender: TObject);
begin
Label1.Caption := 'Today is ' + DateToStr(Date);
end;
------------------------------------------
DateTimeToStr 日期时间转换成内定型字串(1996/12/20 09:12:20 PM)
------------------------------------------
Unit SysUtils
函数原型 function DateTimeToStr(DateTime: TDateTime): string;
范例 procedure TForm1.Button1Click(Sender: TObject);
begin
Label1.Caption := DateTimeToStr(Now);
end;
--------------------------------------------------------
DateTimeToString 日期时间转换成自定型字串
-------------------------------------------------------
Unit SysUtils
函数原型 procedure DateTimeToString(var Result: string; const Format:
string; DateTime: TDateTime);
范例 procedure TForm1.FormCreate(Sender: TObject);
var
s:string;
begin
DateTimeToString(s,'dddd,mmmm d,yyyy "at" hh:mm
AM/PM',Now);
Label1.Caption :=s;
end;
结果 星期五,十二月 20,1996 at 09:20 PM
-----------------------------------------------------------------------------
**** Format格式叁考下面.FormatDateTime.
--------------------------------------------------------
DateToStr 日期转换成内定型字串.(1996/12/20)
--------------------------------------------------------
Unit SysUtils
函数原型 function DateToStr(Date: TDateTime): string;
范例
procedure TForm1.Button1Click(Sender: TObject);
begin
Label1.Caption := 'Today is ' + DateToStr(Date);
end;
# Date, DateToStr Example
--------------------------------------------------------
DayOfWeek 求叁数日期是星期几.
--------------------------------------------------------
Unit SysUtils
函数原型 function DayOfWeek(Date: TDateTime): Integer;
说明 传回值是一整数,1~7.
星期日为1.
范例
procedure TForm1.Button1Click(Sender: TObject);
var
ADate: TDateTime;
days: array[1..7] of string;
begin
days[1] := 'Sunday';
days[2] := 'Monday';
days[3] := 'Tuesday';
days[4] := 'Wednesday';
days[5] := 'Thursday';
days[6] := 'Friday';
days[7] := 'Saturday';
ADate := StrToDate(Edit1.Text);
ShowMessage(Edit1.Text + ' is a ' + days[DayOfWeek(ADate)];
end;
# StrToDate, DayOfWeek Example
--------------------------------------------------------
DecodeDate 将TDateTime型态的日期变数,转为Word型态.
--------------------------------------------------------
范例
procedure TForm1.Button1Click(Sender: TObject);
var
Present: TDateTime;
Year, Month, Day, Hour, Min, Sec, MSec: Word;
begin
Present:= Now;
DecodeDate(Present, Year, Month, Day);
Label1.Caption := 'Today is Day ' + IntToStr(Day) + ' of Month '
+ IntToStr(Month) + ' of Year ' + IntToStr(Year);
DecodeTime(Present, Hour, Min, Sec, MSec);
Label2.Caption := 'The time is Minute ' + IntToStr(Min) + ' of Hour '
+ IntToStr(Hour);
end;
# DecodeDate, DecodeTime Example
--------------------------------------------------------
DecodeTime 将TDateTime型态的时间变数,转为Word型态.
--------------------------------------------------------
Unit SysUtils
函数原型 procedure DecodeDate(Date: TDateTime; var Year, Month,Day: Word);
函数原型 procedure DecodeTime(Time: TDateTime; var Hour, Min, Sec,MSec: Word);
范例 procedure TForm1.Button1Click(Sender: TObject);
var
Present: TDateTime;
Year, Month, Day, Hour, Min, Sec, MSec: Word;
begin
Present:= Now;
DecodeDate(Present, Year, Month, Day);
Label1.Caption := 'Today is Day ' + IntToStr(Day) + ' of
Month ' + IntToStr(Month) + ' of Year ' + IntToStr(Year);
DecodeTime(Present, Hour, Min, Sec, MSec);
Label2.Caption := 'The time is Minute ' +IntToStr(Min) + ' of
Hour ' + IntToStr(Hour);
end;
--------------------------------------------------------
EncodeDate 将Word型态的日期变数,转为TDateTime型态.
--------------------------------------------------------
范例
procedure TForm1.Button1Click(Sender: TObject);
var
MyDate: TDateTime;
begin
MyDate := EncodeDate(StrToInt(Edit1.Text), StrToInt(Edit2.Text), StrToInt(Edit3.Text));
Label1.Caption := DateToStr(MyDate);
end;
-------------------------------------------------------
EncodeTime 将Word型态的时间变数,转为TDateTime型态.
--------------------------------------------------------
Unit SysUtils
函数原型 function EncodeDate(Year, Month, Day: Word): TDateTime;
函数原型 function EncodeTime(Hour, Min, Sec, MSec: Word):
TDateTime;
范例 procedure TForm1.Button1Click(Sender: TObject);
var
MyDate: TDateTime;
MyTime: TDateTime;
begin
MyDate := EncodeDate(83, 12, 31);
Label1.Caption := DateToStr(MyDate);
MyTime := EncodeTime(0, 45, 45, 7);
Label2.Caption := TimeToStr(MyTime);
end;
范例
procedure TForm1.Button1Click(Sender: TObject);
var
MyTime: TDateTime;
begin
MyTime := EncodeTime(0, 45, 45, 7);
Label1.Caption := TimeToStr(MyTime);
end;
--------------------------------------------------------
FormatDateTime 将日期时间依Format的格式转换给一字串.
--------------------------------------------------------
Unit SysUtils
函数原型 function FormatDateTime(const Format: string; DateTime:
TDateTime): string;
**** 类似DateTimeToString.
Format格式
c 内定值ShortDateFormat的格式.(1996/12/20 09:20:15 PM).
d 日期,前面不补0.(1-31)
dd 日期,前面补0.(01-31)
ddd 星期.(星期日).
Dddd 中文2.01版,同上.
ddddd 日期.(1996/12/20)
dddddd 日期.(1996年12月20日)
m 月份,前面不补0.(1-12)
mm 月份,前面补0.(01-12)
mmm 中文显示.(十二月)
mmmm 中文2.01版,同上.
Yy 年度.(00-99)
yyyy 年度.(0000-9999)
h 小时.(0-23)
hh 小时.(00-23)
n 分钟.(0-59)
nn 分钟.(00-59)
s 秒钟.(0-59)
ss 秒钟.(00-59)
t 时间.(09:20 PM)
tt 时间.(09:20:15 PM)
am/pm 单独显示am or pm.(若大写,则显示大写)
a/p 单独显示a or p.
范例
The following example assigns 'The meeting is on Wednesday, February 15, 1995 at 10:30 AM' to the string variable S.
S := FormatDateTime('"The meeting is on " dddd, mmmm d, yyyy, " at " hh:mm AM/PM',
StrToDateTime('2/15/95 10:30am'));//???
--------------------------------------------------------
Now 传回目前的日期时间.
--------------------------------------------------------
Unit SysUtils
函数原型 function Now: TDateTime;
范例
procedure TForm1.Button1Click(Sender: TObject);
begin
Label1.Caption := DateTimeToStr(Now);
end;
# Now, DateTimeToStr Example
--------------------------------------------------------
StrToDate 将字串转为TDateTime型态的日期.
--------------------------------------------------------
Unit SysUtils
函数原型 function StrToDate(const S: string): TDateTime;
范例 procedure TForm1.Button1Click(Sender: TObject);
var
ADate: TDateTime;
begin
ADate := StrToDate(Edit1.Text);
Label1.Caption := DateToStr(ADate);
end;
范例
procedure TForm1.Button1Click(Sender: TObject);
var
ADate: TDateTime;
days: array[1..7] of string;
begin
days[1] := 'Sunday';
days[2] := 'Monday';
days[3] := 'Tuesday';
days[4] := 'Wednesday';
days[5] := 'Thursday';
days[6] := 'Friday';
days[7] := 'Saturday';
ADate := StrToDate(Edit1.Text);
ShowMessage(Edit1.Text + ' is a ' + days[DayOfWeek(ADate)];
end;
# StrToDate, DayOfWeek Example
--------------------------------------------------------
StrToDateTime 将字串转为TDateTime型态的日期时间.
--------------------------------------------------------
Unit SysUtils
函数原型 function StrToDateTime(const S: string): TDateTime;
范例
procedure TForm1.Button1Click(Sender: TObject);
var
ADateAndTime: TDateTime;
begin
ADateAndTime := StrToDateTime(Edit1.Text);
Table1.FieldByName('TimeStamp').AsDateTime := ADateAndTime;
end;
--------------------------------------------------------
StrToTime 将字串转为TDateTime型态的时间.
--------------------------------------------------------
Unit SysUtils
函数原型 function StrToTime(const S: string): TDateTime;
范例
procedure TForm1.Button1Click(Sender: TObject);
var
ATime: TDateTime;
begin
ATime := StrToTime(Edit1.Text);
if ATime < 0.50 then
ShowMessage('Good Morning')
else
ShowMessage('Good Afternoon');
end;
--------------------------------------------------------
Time 传回目前的时间.
--------------------------------------------------------
Unit SysUtils
函数原型 function Time: TDateTime;
范例
procedure TForm1.Timer1Timer(Sender: TObject);
var
DateTime : TDateTime;
str : string;
begin
DateTime := Time; // store the current date and time
str := TimeToStr(DateTime); // convert the time into a string
Caption := str; // display the time on the form's caption
{ Note This could have been done with the following line of code:
Caption := TimeToStr(Time); }
end;
# Time, TimeToStr Example
--------------------------------------------------------
TimeToStr 时间转换成内定型字串.(09:20:15 PM)
--------------------------------------------------------
Unit SysUtils
函数原型 function TimeToStr(Time: TDateTime): string;
GetMem procedure 配置记忆体程序
New 配置指位器P的记忆体空间,
大小为P所指型态的大小.
--------------------------------------------------------
Dispose 释放New所配置的记忆体.
--------------------------------------------------------
Unit System
函数原型 procedure New(var P: Pointer);
函数原型 procedure Dispose(var P: Pointer);
范例 type
PListEntry = ^TListEntry;
TListEntry = record
Next: PListEntry;
Text: string;
Count: Integer;
end;
var
List, P: PListEntry;
begin
...
New(P);
P^.Next := List;
P^.Text := 'Hello world';
P^.Count := 1;
List := P;
...
Dispose(P);
…
end;
范例
type
Str18 = string[18];
var
P: ^Str18;
begin
New(P);
P^ := 'Now you see it...';
Dispose(P); { Now you don't... }
end;
--------------------------------------------------------
GetMem 配置指位器P的记忆体空间,大小可自行设定.
--------------------------------------------------------
范例
var
F: file;
Size: Integer;
Buffer: PChar;
begin
AssignFile(F, 'test.txt');
Reset(F, 1);
try
Size := FileSize(F);
GetMem(Buffer, Size);
try
BlockRead(F, Buffer^, Size);
ProcessFile(Buffer, Size);
finally
FreeMem(Buffer);
end;
finally
CloseFile(F);
end;
end;
--------------------------------------------------------
FreeMem 释放GetMem所配置的记忆体.
--------------------------------------------------------
Unit System
函数原型 procedure GetMem(var P: Pointer; Size: Integer);
函数原型 procedure FreeMem(var P: Pointer[; Size: Integer]);
范例 var
F: file;
Size: Integer;
Buffer: PChar;
begin
AssignFile(F, 'test.txt');
Reset(F, 1);
try
Size := FileSize(F);
GetMem(Buffer, Size);
try
BlockRead(F, Buffer^, Size);
ProcessFile(Buffer, Size);
finally
FreeMem(Buffer);
end;
finally
CloseFile(F);
end;
end;
====================================
File-management routines 档案管理常式
====================================
--------------------------------------------------------
ChangeFileExt 变更档案的副档名
--------------------------------------------------------
Unit SysUtils
函数原型 function ChangeFileExt(const FileName, Extension: string):
string;
范例 procedure TForm1.Button1Click(Sender: TObject);
var
S: String;
P1:String;
P2:String;
begin
P1:='abc.txt';
P2:='.ini';
S := ChangeFileExt(P1,P2);
Label1.Caption:=S;
end;
结果 S== 'abc.ini'
P1:='abc'
P2:='.ini'
S== 'abc.ini'
P1:='c:/windows/abc.txt'
P2:='.ini'
S=='c:/windows/abc.ini'
P1:='abc.txt'
P2:='ini'
S=='abcini'
**注意:P2的第一位元必须有一点'.ini'
范例
procedure TForm1.ConvertIcon2BitmapClick(Sender: TObject);
var
s : string;
Icon: TIcon;
begin
OpenDialog1.DefaultExt := '.ICO';
OpenDialog1.Filter := 'icons (*.ico)|*.ICO';
OpenDialog1.Options := [ofOverwritePrompt, ofFileMustExist, ofHideReadOnly ];
if OpenDialog1.Execute then
begin
Icon := TIcon.Create;
try
Icon.Loadfromfile(OpenDialog1.FileName);
s:= ChangeFileExt(OpenDialog1.FileName,'.BMP');
Image1.Width := Icon.Width;
Image1.Height := Icon.Height;
Image1.Canvas.Draw(0,0,Icon);
Image1.Picture.SaveToFile(s);
ShowMessage(OpenDialog1.FileName + ' Saved to ' + s);
finally
Icon.Free;
end;
end;
end;
# SaveToFile, Create, Height, Width, Canvas, ChangeFileExt example
--------------------------------------------------------
ExpandFileName 将档案名称加在目前所在之路径全名之後
--------------------------------------------------------
Unit SysUtils
函数原型 function ExpandFileName(const FileName: string): string;
说明 设目前目录为 c:/windows 档案名称为 abc.txt
则结果为 c:/windows/abc.txt
**** 此函数并不是求abc.txt的所在路径.
范例 procedure TForm1.Button1Click(Sender: TObject);
var
S: String;
begin
S:=ExpandFileName('abc.txt');
Label1.Caption:=S;
end;
范例
procedure TForm1.Button1Click(Sender: TObject)
begin
ListBox1.Items.Add(ExpandFileName(Edit1.Text));
end;
------------------------------------------------------------------
DirectoryExists 目录是否存在------------------------------------------------------------------
Unit
FileCtrl
uses FileCtrl;
procedure TForm1.Button1Click(Sender: TObject);
begin
if not DirectoryExists('c:/temp') then
if not CreateDir('C:/temp') then
raise Exception.Create('Cannot create c:/temp');
end;
--------------------------------------------------------
ForceDirectories 目录
---------------------------------------------------------
Unit FileCtrl
函数原型 function ForceDirectories(Dir: string): Boolean;
procedure TForm1.Button1Click(Sender: TObject);
var
Dir: string;
begin
Dir := 'C:/APPS/SALES/LOCAL';
if DirectoryExists(Dir) then
Label1.Caption := Dir + ' was created'
end;
--------------------------------------------------------
ExpandUNCFileName 同上(只是得到网路上的路径)
--------------------------------------------------------
Unit SysUtils
函数原型 function ExpandUNCFileName(const FileName: string):string;
ExtractFileDir 分析字串中的路径
Unit SysUtils
函数原型 function ExtractFileDir(const FileName: string): string;
说明 设S字串为 c:/windows/abc.txt
则结果为 c:/windows
**** 功能在於由任何部份传来的叁数,加以分析它的路径
范例 procedure TForm1.Button1Click(Sender: TObject);
var
S: String;
P1:String;
begin
P1:='c:/windows/abc.txt';
S:=ExtractFileDir(P1);
Label1.Caption:=S;
end;
S=='c:/windows'
P1:='abc.txt'
S=='
P1:='c:abc.txt'
S=='c:'
P1:='c:/abc.txt'
S=='c:/'
--------------------------------------------------------
ExtractFileDrive 分析字串中的磁碟机名称
--------------------------------------------------------
Unit SysUtils
函数原型 function ExtractFileDrive(const FileName: string): string;
**** 功能同上,只是传回磁碟机名称.
范例 procedure TForm1.Button1Click(Sender: TObject);
var
S: String;
P1:String;
begin
P1:='c:/windows/abc.txt';
S:=ExtractFileDrive(P1);
Label1.Caption:=S;
end;
S:='c:'
P1:='abc.txt'
S=='
--------------------------------------------------------
ExtractFileExt 分析字串中的档案名称的副档名
--------------------------------------------------------
Unit SysUtils
函数原型 function ExtractFileExt(const FileName: string): string;
范例 procedure TForm1.Button1Click(Sender: TObject);
var
S: String;
P1:String;
begin
P1:='c:/windows/abc.txt';
S:=ExtractFileExt(P1);
Label1.Caption:=S;
end;
S=='.txt'
P1:='c:/windows/abc'
S=='
范例 MyFilesExtension := ExtractFileExt(MyFileName);
--------------------------------------------------------
ExtractFileName 分析字串中的档案名称(只传回档案名称)
--------------------------------------------------------
Unit SysUtils
函数原型 function ExtractFileName(const FileName: string): string;
范例 procedure TForm1.Button1Click(Sender: TObject);
var
S: String;
P1:String;
begin
P1:='c:/windows/abc.txt';
S:=ExtractFileName(P1);
Label1.Caption:=S;
end;
S=='abc.txt'
范例
procedure TForm1.Button1Click(Sender: TObject);
var
BackupName: string;
FileHandle: Integer;
StringLen: Integer;
X: Integer;
Y: Integer;
begin
if SaveDialog1.Execute then
begin
if FileExists(SaveDialog1.FileName) then
begin
BackupName := ExtractFileName(SaveDialog1.FileName);
BackupName := ChangeFileExt(BackupName, '.BAK');
if not RenameFile(SaveDialog1.FileName, BackupName) then
raise Exception.Create('Unable to create backup file.');
end;
FileHandle := FileCreate(SaveDialog1.FileName);
{ Write out the number of rows and columns in the grid. }
FileWrite(FileHandle,
StringGrid1.ColCount, SizeOf(StringGrid1.ColCount));
FileWrite(FileHandle,
StringGrid1.RowCount, SizeOf(StringGrid1.RowCount));
for X := 0 to StringGrid1.ColCount ? 1 do
begin
for Y := 0 to StringGrid1.RowCount ? 1 do
begin
{ Write out the length of each string, followed by the string itself. }
StringLen := Length(StringGrid1.Cells[X,Y]);
FileWrite(FileHandle, StringLen, SizeOf(StringLen));
FileWrite(FileHandle,
StringGrid1.Cells[X,Y], Length(StringGrid1.Cells[X,Y]);
end;
end;
FileClose(FileHandle);
end;
end;
##FileExists, RenameFile, FileCreate, FileWrite, FileClose, ExtractFileName Example
--------------------------------------------------------
ExtractFilePath 分析字串中的路径
--------------------------------------------------------
Unit SysUtils
函数原型 function ExtractFilePath(const FileName: string): string;
说明 设S字串为 c:/windows/abc.txt
则结果为 c:/windows范例 procedure TForm1.Button1Click(Sender: TObject);
var
S: String;
P1:String;
begin
P1:='c:/windows/abc.txt';
S:=ExtractFilePath(P1);
Label1.Caption:=S;
end;
范例
begin
with Session do
begin
ConfigMode := cmSession;
try
AddStandardAlias('TEMPDB', ExtractFilePath(ParamStr(0)), 'PARADOX');
finally
ConfigMode := cmAll;
end;
end;
##ConfigMode, AddStandardAlias, ExtractFilePath example
--------------------------------------------------------
FileSearch 寻找档案在磁碟机中的正确路径
--------------------------------------------------------
Unit SysUtils
函数原型 function FileSearch(const Name, DirList: string): string;
范例 var
s:string;
begin
s:= FileSearch('abc.txt', 'c:/window/');
Label1.Caption:=s;
end;
说明 找到传回c:/window/abc.txt 找不到传回空字串.
范例
procedure TForm1.Button1Click(Sender: TObject);
var
buffer: array [0..255] of char;
FileToFind: string;
begin
GetWindowsDirectory(buffer, SizeOf(buffer));
FileToFind := FileSearch(Edit1.Text, GetCurrentDir + ';' + buffer);
if FileToFind = ' then
ShowMessage('Couldn't find ' + Edit1.Text + '.')
else
ShowMessage('Found ' + FileToFind + '.');
end;
##FileSearch, ShowMessage Example
--------------------------------------------------------
FileAge 传回档案的日期及时间(DOS型态).
--------------------------------------------------------
Unit SysUtils
函数原型 function FileAge(const FileName: string): Integer;
说明 就是档案总管中档案内容裹面的修改日期.
范例 procedure TForm1.Button1Click(Sender: TObject);
var
S: String;
FileDate1:Integer;
DateTime1:TDateTime;
begin
FileDate1 := FileAge('c:/delphi_d/delphi_help1.txt');
DateTime1 := FileDateToDateTime(FileDate1);
S := DateTimeToStr(DateTime1);
Label1.Caption:=S;
end;
--------------------------------------------------------
FileDateToDateTime 将DOS型态的日期时间转换为TDateTime型态.
--------------------------------------------------------
Unit SysUtils
函数原型 function FileDateToDateTime(FileDate: Integer):TDateTime;
-----------------------------------------------------------------------------
DateTimeToFileDate 将TDateTime型态的日期时间转换为 DOS型态.
-----------------------------------------------------------------------------
Unit SysUtils
函数原型 function DateTimeToFileDate(DateTime: TDateTime):Integer;
FileGetDate 传回档案的日期及时间(DOS型态).
Unit SysUtils
函数原型 function FileGetDate(Handle: Integer): Integer;
说明 就是档案总管中档案内容裹面的修改日期.
范例 procedure TForm1.Button1Click(Sender: TObject);
var
FileHandle:Integer;
S: String;
FileDate1:Integer;
DateTime1:TDateTime;
begin
FileHandle :=FileOpen('c:/delphi_d/delphi_help2.txt',
fmOpenReadWrite);
if FileHandle > 0 then
Begin
FileDate1 := FileGetDate(FileHandle);
DateTime1 := FileDateToDateTime(FileDate1);
S := DateTimeToStr(DateTime1);
FileClose(FileHandle);
End
else
S := 'Open File Error';
Label1.Caption:=S;
end;
-----------------------------------------------------------------------------
FileSetDate 设定档案的日期及时间(DOS型态).
-----------------------------------------------------------------------------
Unit SysUtils
函数原型 function FileSetDate(Handle: Integer; Age: Integer): Integer;
说明 传回值为0表示成功.
-----------------------------------------------------------------------------
DeleteFile 删除档案
-----------------------------------------------------------------------------
Unit SysUtils
函数原型 function DeleteFile(const FileName: string): Boolean;
范例 一 DeleteFile('DELETE.ME');
范例 二 if FileExists(FileName) then
if MessageDlg('Do you really want to delete ' +
ExtractFileName(FileName) + '?'), []) = IDYes then
DeleteFile(FileName);
##FileExists, DeleteFile Example
-----------------------------------------------------------------------------
RenameFile 更改档名
-----------------------------------------------------------------------------
Unit SysUtils
函数原型 function RenameFile(const OldName, NewName: string):Boolean;
范例
procedure TForm1.Button1Click(Sender: TObject);
var
BackupName: string;
FileHandle: Integer;
StringLen: Integer;
X: Integer;
Y: Integer;
begin
if SaveDialog1.Execute then
begin
if FileExists(SaveDialog1.FileName) then
begin
BackupName := ExtractFileName(SaveDialog1.FileName);
BackupName := ChangeFileExt(BackupName, '.BAK');
if not RenameFile(SaveDialog1.FileName, BackupName) then
raise Exception.Create('Unable to create backup file.');
end;
FileHandle := FileCreate(SaveDialog1.FileName);
{ Write out the number of rows and columns in the grid. }
FileWrite(FileHandle,
StringGrid1.ColCount, SizeOf(StringGrid1.ColCount));
FileWrite(FileHandle,
StringGrid1.RowCount, SizeOf(StringGrid1.RowCount));
for X := 0 to StringGrid1.ColCount ? 1 do
begin
for Y := 0 to StringGrid1.RowCount ? 1 do
begin
{ Write out the length of each string, followed by the string itself. }
StringLen := Length(StringGrid1.Cells[X,Y]);
FileWrite(FileHandle, StringLen, SizeOf(StringLen));
FileWrite(FileHandle,
StringGrid1.Cells[X,Y], Length(StringGrid1.Cells[X,Y]);
end;
end;
FileClose(FileHandle);
end;
end;
-----------------------------------------------------------------------------
DiskFree 磁碟机剩馀空间(Bytes)
-----------------------------------------------------------------------------
Unit SysUtils
函数原型 function DiskFree(Drive: Byte): Integer;
范例 var
S: string;
begin
S := IntToStr(DiskFree(0) div 1024) + ' Kbytes free.';
Label1.Caption:=S;
end;
说明 Drive
0=目前磁碟机,1=A磁碟机,2=B磁碟机...传回值若为-1,表示磁碟机侦测错误.
范例
var
S: string;
AmtFree: Int64;
Total: Int64;
begin
AmtFree := DiskFree(0);
Total := DiskSize(0);
S := IntToStr(AmtFree div Total) + 'percent of the space on drive 0 is free: ' (AmtFree div 1024) + ' Kbytes free. ';
Canvas.TextOut(10, 10, S);
end;
##DiskFree, DiskSize Example
-----------------------------------------------------------------------------
DiskSize 磁碟机空间大小(Bytes)
-----------------------------------------------------------------------------<