提交concurrent时出现APP-FND-00362错误

新建立一个XXCUST_TOP,将报表挂在其下面提交请求时,出现如下错误:
APP-FND-00362: Routine afpbep cannot execute request &REQUEST for program &PROGRAM, because the environment variable &BASEPATH is not set for the application to which the concurrent program executable &EXECUTABLE belongs.

Shut down the concurrent managers. Set the basepath environment variable for the application. Restart the concurrent managers. (VARIABLE=)
Routine AFPEOT cannot construct the name of an executable file for your concurrent request 506650.

Check that the file name components are correct and valid on your system. Check that the environment for the person who started the concurrent manager
 
 
Query to Check whether the Env is set for the Particular request :
===============================================

select variable_name,value from fnd_env_context e ,fnd_concurrent_processes p ,fnd_concurrent_requests r where p.concurrent_process_id =
e.concurrent_process_id and p.concurrent_process_id = r.controlling_manager and e.variable_name like '%CUSTOM_TOP%' and r.request_id = &request_id;
Solution :
=======

Add the respective Top in env file

ie) APPL_TOP/admin/adovars.env

so that while running autoconfig it wont remove every time.

XXTEST_TOP="/u01/apps/apps_st/appl/XXTEST/1.0.0" export XXTEST_TOP


来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/10951282/viewspace-758382/,如需转载,请注明出处,否则将追究法律责任。

转载于:http://blog.itpub.net/10951282/viewspace-758382/

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
In Verilog, a non-net refers to a variable that is not a wire or a register, but rather a constant or a parameter. Concurrent assignment refers to the assignment of a value to a variable using the "=" operator in a module outside of any procedural blocks (such as always or initial blocks). A concurrent assignment to a non-net is not allowed in Verilog. This is because a non-net does not have a storage element and cannot hold a value assigned to it. Instead, it is typically used as a constant or a parameter that is available for use in the module. To assign a value to a non-net, it should be done within a procedural block using the appropriate assignment operator (such as "<=" for registers or "assign" for wires). Alternatively, the value can be passed as an argument to the module using the parameter keyword. For example: module my_module #(parameter WIDTH = 8) ( input clk, input [WIDTH-1:0] data_in, output [WIDTH-1:0] data_out ); // This is a non-net parameter parameter ADD_VALUE = 5; // This is a register that can be assigned using the "=" operator within an always block reg [WIDTH-1:0] register_data; always @(posedge clk) begin register_data <= data_in + ADD_VALUE; end // This is a wire that can be assigned using the "assign" keyword assign data_out = register_data; endmodule In this example, ADD_VALUE is a non-net parameter that is used in the always block to add a constant value to the input data. The register_data variable is assigned using the "=" operator within the always block. The data_out wire is assigned using the "assign" keyword.
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值