Something about the concrete mixing plant control system

Comparison of the human brain is mixed with respect to the control system of the cement mixing station, by him to control all the limbs and action. If there is a problem of the whole system,concrete mixing station are unable to work mobile block making machine, we Zhengzhou daswell is specialized in the production of concrete mixing station manufacturers, to explain to you if you have a problem to control system how to repair.

Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows: diesel cement mixers for sale, concrete block making machine, SICOMA MPC planetary mixer manufacturer,etc. We will provide you with the best product and service.

Fault phenomenon: an aggregate balance, using the cantilever beam sensor, rated load is 5 tons,1 tons of good linearity, but more than 1 tons, the linear is poor, and the bigger the linearity is not good, the electrical resistance method, voltage and pressure angle method examination is very good. The careful observation, found that the strain which has a sensor has accumulated material,clear, all normal. The reason for this failure is the large range sensors, deformation does not occur in a small weight diesel mixer for sale, but the increase of weight sensor batch plant, micro deformation will occur, if the object effect of deformation, the sensor output is not linear. We must pay attention to the installation beam sensors, one end fixed sensor can not exceed the strain, strain area beam type sensor is generally in the middle, appearance than the ends to be narrow, installation must not affect the strain area

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/30225581/viewspace-1626278/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/30225581/viewspace-1626278/