HTG评论Netgear EX6100:扩展了Wi-Fi的瑞士军刀

Netgear EX6100是一款多用途的802.11ac无线扩展器,支持2.4GHz和5GHz网络。它可以扩展Wi-Fi覆盖,用作独立接入点或Wi-Fi到以太网桥。设置简单,通过LED指示灯方便定位。虽然速度不快,但其多功能性和易于使用使其成为家庭网络扩展的实用解决方案。
摘要由CSDN通过智能技术生成

Whether you’re looking for a way to simply extend your Wi-Fi network, bridge your existing Wi-Fi network to a LAN, or create a completely new access point, the Netgear EX6100 can do it all. Read on as we put the multi-faceted little range extender through the paces.

无论您是寻找一种简单地扩展Wi-Fi网络,将现有Wi-Fi网络桥接到LAN还是创建全新的接入点的方法,Netgear EX6100都能完成所有工作。 继续阅读时,请继续阅读多方面的小范围扩展器。

什么是EX6100? (What Is The EX6100?)

The Netgear EX6100 (herein referred to as the EX6100 for brevity) is a wall-wart form factor wireless extender. Wireless extenders are intended to extend the reach of your original wireless signal beyond the range of your primary Wi-Fi connection; you place the extender within the current range of your router and it takes that signal and extends it outward.

Netgear EX6100 (为简便起见,在下文中称为EX6100)是一种壁挂式无线扩展器。 无线扩展器旨在将原始无线信号的范围扩展到主要Wi-Fi连接的范围之外; 您将扩展器放置在路由器的当前范围内,它将接收该信号并将其向外扩展。

In addition to providing Wi-Fi extension, the EX6100 sports several other very useful features. The unit has a gigabit Ethernet port built in and in addition to Wi-Fi extension you can also use the EX6100 as a unique access point (by plugging in an Ethernet cable to your physical LAN) and you can use the unit as a Wi-Fi-to-Ethernet bridge by connecting an Ethernet cable to the unit and then to a device (such as a video game console with an Ethernet port). There’s a whole lot of useful functionality packed into a very small container here.

除了提供Wi-Fi扩展,EX6100还具有其他一些非常有用的功能。 该设备内置一个千兆以太网端口,除了Wi-Fi扩展之外,您还可以将EX6100用作唯一的访问点(通过将以太网电缆插入物理LAN),并且可以将该设备用作Wi-通过将以太网电缆连接到本机,然后再连接到设备(例如具有以太网端口的视频游戏机)来建立Fi-Ethernet桥。 这里有很多有用的功能,它们包装在一个非常小的容器中。

The EX6100 is an 802.11ac device and supports both 2.4GHz and 5GHz networks. Read on as we run through the setup and speed tests.

EX6100是802.11ac设备,同时支持2.4GHz和5GHz网络。 在我们进行设置和速度测试时,请继续阅读。

如何设置? (How Do I Set It Up?)

Setting up the EX6100 is a breeze. If you’re setting up as an extender, toggle the physical switch the side of the unit (seen in the photo above) from “Access Point” to “Extender.” Reverse the process if you’ll be usin

网件路由器救砖软件及操作步骤 操作准备:可能需要安装 Npcap ,我的是Win7系统,其他系统自己尝试 操作说明: 1,下载官方固件或者要刷到固件备用(最好先用官方固件救砖后再做其他操作) 2,在当前文件夹打开CMD窗口 3,用 nmrpflash -L 命令查看当前的网卡列表,会输出类似如下的内容 D:\NG>nmrpflash -L net0 192.168.1.55 cc:cc:cc:cc:cc:cc (本地连接) [备注:网卡地址已打码处理] net1 0.0.0.0 cc:cc:cc:cc:cc:cc (本地连接 3) [备注:网卡地址已打码处理] net2 0.0.0.0 cc:cc:cc:cc:cc:cc (本地连接 4) [备注:网卡地址已打码处理] 3,打开电脑的网络连接窗口,以便于实时查看网络连接状态 4,用网线连接路由器到电脑的网口 5,准备好如下命令 nmrpflash -i net1 -f openwrt.bin 其中 net1 根据第3步的结果和实际连接的网口做相应的修改 固件文件名 openwrt.bin 根据你实际的文件名做相应的修改 6,将路由器通电,观察网络状态由 [网络电缆被拔出] 开始转换为 [正在识别...] 此时马上执行第5步的命令,如果出现如下的信息 D:\NG>nmrpflash -i net1 -f openwrt.bin Advertising NMRP server on net1 ... \ Received configuration request from cc:cc:cc:cc:cc:cc. [备注:网卡地址已打码处理] Sending configuration: 10.164.183.252/24. Received upload request: filename 'firmware'. Uploading openwrt.bin ... OK Waiting for remote to respond. Remote finished. Closing connection. Reboot your device now. 则说明刷机成功完成,重启路由器,在浏览器输入 192.168.1.1 访问路由器即可 如果出现其他信息,重新尝试本步骤的操作...
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值