ubuntu修复eth0_在Ubuntu虚拟机中修复“无法启动eth0”

ubuntu修复eth0

If you’ve moved an Ubuntu virtual machine or modified it and then suddenly had a problem getting networking to work, you might want to read through this page, because I’ve figured out a workaround to get it working again.

如果您已经移动了Ubuntu虚拟机或对其进行了修改，然后突然使网络无法正常工作，则您可能需要通读本页面，因为我已经找到了使其重新运行的解决方法。

The full error message is this:

完整的错误消息是这样的：

eth0: ERROR while getting interface flags: No such device 
There is already a pid file /var/run/dhclient.eth0.pid with pid 6847440 
Internet Systems Consortium DHCP Client V3.0.4 
Copyright 2004-2006 Internet Systems Consortium. 
All rights reserved. 
For info, please visit http://www.isc.org/sw/dhcp/ 

SIOCSIFADDR: No such device 
eth0: ERROR while getting interface flags: No such device 
eth0: ERROR while getting interface flags: No such device 
Bind socket to interface: No such device 
Failed to bring up eth0.

eth0: ERROR while getting interface flags: No such device 
There is already a pid file /var/run/dhclient.eth0.pid with pid 6847440 
Internet Systems Consortium DHCP Client V3.0.4 
Copyright 2004-2006 Internet Systems Consortium. 
All rights reserved. 
For info, please visit http://www.isc.org/sw/dhcp/ 

SIOCSIFADDR: No such device 
eth0: ERROR while getting interface flags: No such device 
eth0: ERROR while getting interface flags: No such device 
Bind socket to interface: No such device 
Failed to bring up eth0.

sudo vi /etc/network/interfaces

After you run this command to restart networking, everything should likely start working again:

在您运行以下命令以重新启动网络之后，所有内容都可能会再次开始工作：

sudo /etc/init.d/networking restart

sudo /etc/init.d/networking restart

You should be able to run a ping command, or use ifconfig -a and everything will be working.

您应该能够运行ping命令，或使用ifconfig -a，一切都会正常进行。

翻译自: https://www.howtogeek.com/168143/fixing-failed-to-bring-up-eth0-in-ubuntu-virtual-machine/

ubuntu修复eth0