synology nfs_如何在Synology NAS中更换发生故障的硬盘

synology nfs

It’s never fun when a hard drive dies, but Synology at least makes it pretty easy to replace a dead drive in your NAS. You can get back up and running without much fuss. Here’s how to do it.

当硬盘驱动器死机时，这永远都不是一件有趣的事，但是Synology至少使在NAS中更换死驱动器变得非常容易。 您可以恢复正常运行，而不必大惊小怪。 这是操作方法。

If you’re in this current situation, hopefully you’re running a RAID setup so that you didn’t lose any data. If so, that’s one less thing to worry about. Plus, RAID lets you keep your NAS up and running like normal even if one of the hard drives dies, so there’s no rush to replace the drive right away. That said, you do lose some (or all) of your fault tolerance until you can replace the failed hard drive. Replacing it sooner rather than later is ideal.

如果您目前处于这种情况，则希望您正在运行RAID设置，这样就不会丢失任何数据。 如果是这样，那就不用担心了。 此外，即使其中一个硬盘驱动器失效，RAID仍可让您保持NAS正常运行，因此不必急于立即更换驱动器。 就是说，您确实失去了部分(或全部)容错能力，直到可以更换发生故障的硬盘驱动器为止。 尽快更换它是理想的。

第一步：确定故障驱动器 (Step One: Identify the Failed Drive)

When a hard drive fails, Synology lets you know about it by loudly beeping at you. On top of that, you’ll get warnings about a “degraded” volume.

当硬盘发生故障时，Synology会通过大声鸣叫来告知您。 最重要的是，您将收到有关“降级”音量的警告。

You can see which hard drive ended up failing by logging into DiskStation Manager and clicking the main menu button in the top-left corner.

您可以登录DiskStation Manager并单击左上角的主菜单按钮来查看哪个硬盘驱动器最终出现故障。

Next, ope