iphone 保持屏幕常亮_更改自动锁定之前iPhone屏幕保持打开状态的时间

iphone 保持屏幕常亮

By default, when you leave your iPhone or iPad unlocked, it will lock itself and turn off the display after one minute. This is great if you want to save battery life, but really annoying if you’re using it as a cookbook or other reference that you occasionally glance at. The good news is you can change how long it takes before Auto-Lock kicks in on your iPhone or iPad. Here’s how.

默认情况下，当您将iPhone或iPad保持解锁状态时，它会锁定自己并在一分钟后关闭显示屏。 如果您想节省电池寿命，那就太好了，但是如果您偶尔将其用作食谱或其他参考资料，那确实很烦人。 好消息是，您可以更改自动锁定在iPhone或iPad上生效的时间。 这是如何做。

Go to Settings > Displays & Brightness > Auto-Lock.

转到设置>显示和亮度>自动锁定。

Next, select how long you want your iOS device’s screen to stay on for. On an iPhone you can choose between 30 Seconds, 1 Minute, 2 Minutes, 3 Minutes, 4 Minutes, or Never (which will keep the screen on indefinitely). On an iPad, you can choose between 2 Minutes, 5 Minutes, 10 Minutes, 15 Minutes, or Never.

接下来，选择您希望iOS设备的屏幕保持打开状态多长时间。 在iPhone上，您可以在30秒，1分钟，2分钟，3分钟，4分钟或从不之间进行选择(这将使屏幕无限期打开)。 在iPad上，您可以选择2分钟，5分钟，10分钟，15分钟或从不。

I’ve set my iPhone to 3 Minutes and my iPad to 15 Minutes. Conserving battery life is far more important for my phone than my tablet. Pick the values that work for you.

我将iPhone设置为3分钟，将iPad设置为15分钟。 与平板电脑相比，节省电池电量对我的手机而言更为重要。 选择适合您的值。

You can also always temporarily set Auto-Lock to 30 seconds by enabling Low Power Mode on your iPhone, which makes loads of tweaks to save battery life.

您还可以始终通过在iPhone上启用“ 低功耗模式”来将“自动锁定”临时设置为30秒，这样可以进行大量调整以节省电池寿命。

翻译自: https://www.howtogeek.com/333890/change-how-long-your-iphone-screen-stays-on-before-auto-locking/

iphone 保持屏幕常亮